HiTec D956WP High Torque, Waterproof, Steel Gear Digital Servo, 0.12sec/405oz @7.4v
The D956WP has arrived! Based off the D954SW servo, this IP-67 rated version is the true waterproof, dust resistant upgrade for 1/10th-scale Rock Crawlers and Off-Road Trucks. As with our entire “D” line, this technologically-advanced servo is powered by our 32-bit MCU (Microcontroller Unit) and 12-bit ADC (Analog to Digital Converter) industrial science and possess Smart Sense engineering with rapid, high resolution response. The unprecedented programmability and wide-voltage capabilities deliver the most progressive, leading-edge performance for all your radio control needs. With incredibly durable steel gears, dual ball bearing and hardened steel output shaft, the high-end performing D956WP produces the mighty torque and reliability required to take bashers to the next level. FEATURES
PROGRAMMABLE FUNCTIONS
ACCESSORIES
|
Performance Specifications | |
Operating Voltage Range (Volts DC) | 4.8V ~ 7.4V |
Speed (Second @ 60°) | 0.19 ~ 0.12 |
Maximum Torque Range oz. / in. | 251 ~ 405 |
Maximum Torque Range kg. / cm. | 18.0 ~ 29.0 |
Current Draw at Idle | 30 mA |
No Load Operating Current Draw | 500 mA |
Stall Current Draw | 5,200 mA |
Dead Band Width | 1 µs |
Physical Specifications | |
Dimensions (Inches) | 1.57 x 0.78 x 1.46 |
Dimensions (Metric) | 40.0 x 20.0 x 37.0 |
Weight (Ounces) | 2.40 |
Weight (Gram) | 68.0 |
Circuit Type | 32bit Programable Digital |
Motor Type | Coreless Metal Brush |
Gear Material | MK 1st Gear & 3 Steel Alloy Gears |
Bearing Type | Dual Ball Bearing |
Output Shaft (type / Ømm) | H25T |
Case Material | Plastic / Aluminum |
Dust / Water Resistance | IP67 Rating |
Connector Gauge (AWG) / Strand Count | 20 / 80 |
Radio Control Applications | |
Parkflyer | N / A |
Sport Plane | 30 - 40% |
Sailplane | 2 meters and up |
3D Performance | 30 - 40% |
Scale | 30 - 40% |
Electric Helicopter | N / A |
Gas Helicopter | N / A |
On Road | 1/8th |
Monster Truck | 1/8th |
Buggies | 1/8th |
Truggies | 1/8th |
Short Course / Truck | 1/8th |
Crawlers | 1/8th |
Sail Boat | = >1M & Scale |
Power Boat | N/A |
Spring Loaded Canopy Latch
Description: |
T1506
$2.99
LEDs for Night Flying
LEDs for Night Flying Powerful LED array for Side Force Generators. The optimum voltage range for this item is 6.6v to 7.4v.
**You will need 4 LEDs if you plan to use them with the SFGs- this will provide the optimal amount of light for safe flying. Two LEDS illuminate the top of your plane while the other two illumanate the bottom.** |
SS-LED
$9.99
EPP E10 CESSNA Airplane 37.8" (960MM) Wingspan
31.5" EPP 3D Airplane YAK55 Features: • Kit version - Assemble and install your choice of electronics • All hardware accessories included in kit • Durable EPP material with realistic printing resemblance of a shark • Simple to build Specification: Wingspan: 800mm Length: 875mm Flying Weight: 400g Suggested Power System: Motor: 2212 1400KV ESC: 20A Servo: 9g *4 Propeller: SF 8-9inch Radio: more than 4CH BATT: 2S 1200-1500mAh (Not incl.) Different versions supplied as below: E1701=E17 YAK55 KIT+APC SF9047 E1702=E17 YAK55 KIT+Motor(2212 1400KV+3.5mm Banana Male Plug+3.0mm Prop Adapter) E1704=E17 YAK55 KIT+Motor+ESC(20A E-Power+3.5mm Banana Female Plug+XT60 Plug)+Servo(9g*4) |
DW-E1004
$79.99