BMS-590SG, LARGE OFF-ROAD MONSTER TRUCK ROCK CRAWLER HV-DIGITAL, MEGA TORQUE, HIGH SPEED, CORELESS +Servo Arm (63.3kg/879.2oz, 0.14sec at 8.4V)

Contact UsCustomer Reviews

BMS-590SG, LARGE OFF-ROAD MONSTER TRUCK ROCK CRAWLER HV-DIGITAL, MEGA TORQUE, HIGH SPEED, CORELESS +Servo Arm (63.3kg/879.2oz, 0.14sec at 8.4V)

Our Price:

$102.99


Quantity (10)

Availability 10 in stock
Weight 0.51 lbs
SKU BBR-BMS-590SG
Manufacturer Blue Bird

BMS-590SG, LARGE OFF-ROAD MONSTER TRUCK ROCK CRAWLER HV-DIGITAL, MEGA TORQUE, HIGH SPEED, CORELESS +Servo Arm (63.3kg/879.2oz, 0.14sec at 8.4V)

Application / Suitable
Large Servo, Ideal for 1/6 ~ 1/8th Short Course, Buggy ( Off-Road ), GT ( On-road ), Monster Truck, Rock Crawler
 
Specifications
Torque At 6.0V  45.7 kg-cm / 634.8 oz-in
Torque At 7.4V  55.8 kg-cm / 775.1 oz-in
Torque At 8.4V  63.3 kg-cm / 879.2 oz-in
Speed At 6.0V 0.19 sec / 60°
Speed At 7.4V 0.16 sec / 60°
Speed At 8.4V 0.14 sec / 60°

 

Protection Mechanism
Soft Start Protection Soft start to a neutral position.
Over Voltage Protection Over 9.0V drive the protection mode and 8.4V return to normal mode.
Low Voltage Protection Lower than 4.0V, drive the protection mode and 4.5V return to normal mode.
Locked Rotor Protection Stall in 5 sec, output torque goes down.
Temperature Protection Overheat 85 degrees C (185 degrees F), drive the protection mode and down 75 degrees C (167 degrees F) return to normal mode.
Lose Control Protection When losing the transmitter signal, that servo will be back to the neutral position immediately and lock.

 

Power Supply
Operating Voltage Range  4.5V ~ 8.7V ( 2S Li-Fe & HV Li-Poly Compatible )

 

Control Specification
Control System 32-bits CPU Digital Calculator / AD 12-Bits Resolution ( 4096 Steps )
Frequency:Up to 333Hz & Neutral:1500us or 1520us
Dead Band Width 0.002ms ( Default:2us)

 

Mechanical Specifications
Ball Bearing Dual, Stronger Ball Bearings
Gear Stainless Steel Output Gear With All Matel Gears
Motor High-Efficiency Coreless Motor
Outside Case Middle: Aluminum Alloy Case W/ Upper & Bottom: Industrial Plastic Cases
Horn / Gear Spline 15 Teeth ( Universal Type )
Connected Cable Length 300 mm (11.81 in)

 

Physical Specifications
Dimension (mm) 59.7 x 29.6 x 54.6 mm / 2.35 x 1.16 x 2.15 in
Weight (gram) 168.5 ± 1 grams / 5.94 oz
Product Picture / Dimension Sketch

Includes Servo and Servo Arm

: *
: *
: *
 

Spot On Cap Bolt Washers

High quality cap bolt washers. Available in two sizes that can fit M3/ #4-40 threads or M4/#8-32 threads

Choose from Red, Blue, Gold, and Black!

Sold in packs of 10
 

SPO-WACB-

$8.99

Biodegradable Performance Plus Clear Cleaner and Degreaser

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Description:

Bob Smith Industries CA Glue

Super-Gold+™ Odorless, CA

SUPER-GOLD™ and SUPER-GOLD+™ are our odorless INSTA-CURE CAs They are non-frosting and take only 2 or 3 seconds longer to bond. There are no fumes that irritate the nose and eyes. The SUPER-GOLD™’s do not attack white foam; therefore, they can be used in the building of foam core wings and the assembly and repair of plastic and foam ARF’s. They will not fog clear plastic. SUPER-GOLD+™ is ideal for attaching clear canopies in plastic model kits; however, MAXI-CURE™ is still recommended for assembling the rest of plastic kits. Wood can be bonded to white foam with SUPER-GOLD +™ in less than fifteen seconds. For bonding foam to foam, spray a very light fog of INSTA-SET™ to one piece and apply SUPER-GOLD+™ to the other before joining. Excess INSTA-SET™ may create too much heat, which can melt the foam. Both SUPER-GOLD™’s cure to a more flexible consistency for better shock absorbtion. Whenever a large amount of CA is to be used in such applications as saturating fiberglass or Kevlar, SUPER-GOLD™ eliminates the irritating fumes from the evaporating monomer that make repeated use of CA unpleasant at times.

 

Works Best On:

  • Rubber
  • White Foam

Works Good On:

  • Balsa Wood
  • Soft Wood
  • Hard Wood
  • Glass & Metal
  • Fiberglass
  • Ceramics
  • Hard Plastics
  • Laminating
  • Water-Resistant
  • Reinforcing
  • CA Hinges

 

Avaliable in 2oz and 3/4 Pocket Size.

Pocket CAs feature a new top that has a pin built into the cap that covers the nozzle. This pin seals the bottle so that if it is tipped over, the bottle will not leak. This makes the Pocket CAs ideal for keeping in your tool or field box, just like our IC-Gel. One disadvantage that the new Pocket CA top has is the bluntness of the nozzle. This makes it more difficult to apply small amounts of the CA, especially in tight places. From the feedback we have received, it appears about 25-30% of users prefer the new Pocket CA top, which means that over 70% prefer our standard top for general bonding purposes. Most users are buying both types. Our original top for the workshop, and the Pocket CA for use out in the field. The 3/4 oz. Pocket CAs are available in BSI's Insta-Cure, Insta-Cure+, Maxi-Cure and Super-Gold+. BSI's new extender tip #304 works on the Pocket CA.

 

Click to Download Safety Data Sheet

TAE4700

$8.99

Gloster Meteor Twin 70mm EDF Jet

Description:

RedwingRC Plug-and-Play aircraft!

Do you feel the need for speed? Check out the Dynam Meteor V2. This is a High Speed 70mm EDF Sport Jet that features retracts! How cool is that?! The Meteor V2 is constructed with EPO crash resilient foam and it is pre-painted saving you time. If that's not enough, all servos, 70mm Fan, and the 60Amp ESC are factory pre-installed. This airplane is designed for High-Speed flying which is made possible with twin powerful Brushless Electric Ducted-Fans. The Fan Unit is is very well constructed for High-Performance flying. In case you were wondering, this model is absolutely one of the fastest EPO EDF jet on the market.

 

Key Features:

  • Powerful 70mm EDF fan unit and motor
  • 60A Brushless ESC with Switch-Mode BEC
  • retractable landing gear
  • Easy to build.
  • SUPER FAST

Specifications:

Wingspan: 35.8 inch (910mm)
Overall Length: 43.3 (1100mm)
Flying Weight: 38.8oz (1100g) w/Battery
Fan Unit: 70mm fan unit (installed with motor)
Motor Size: Powerful 400 high speed outrunner brushless motors (installed)
Radio / Transmitter: 5 Channel Required - (Not Included)
Receiver: 5+ Channel (Not Included)
Servos: 4 servos installed ( 4 x 9g )
Speed Control : 1 x Dectrum 60A Brushless with Switch-Mode BEC (installed)
Battery: 14.8V 2600 mah 25C LiPo (Not Included)
Charger: NOT INCLUDED 2S - 4S lipo charger
Flight Time:

Average (6-10 mins)

 

 

 

 

 


 

DY37661

$399.99