2.1M (82.7") RQ-7 Shadow Balsa Wood Kit/ Kit+Power Combo (EP/GP UAS FPV Platform)

Contact UsCustomer Reviews

2.1M (82.7") RQ-7 Shadow Balsa Wood Kit/ Kit+Power Combo (EP/GP UAS FPV Platform)

Market Price: $345.00
Our Price:

$275.00

You Save

20%

Kit Versions
Battery Combo
Gas Engine Combo
Quantity (12)

Availability 12 in stock
Weight 50.00 lbs
SKU DW-S1201-RQ-7-Shadow

2.1M (82.7") RQ-7 Shadow Balsa Wood Kit/ Kit+Power Combo (UAS FPV Platform)

The RQ-7 Shadow is a battlefield unmanned aerial vehicle (UAV) used by the armed forces of Australia, Italy, Sweden, the United States and others to provide a reconnaissance, surveillance and as a target acquisition platform. The RQ-7 is a high-wing, constant chord pusher configuration with a twin-tailboom empennage and an inverted v-tail. The aircraft has fixed tricycle landing gear. Takeoffs are assisted by a trailer-mounted pneumatic launcher which can accelerate the 375 pound aircraft to 70 knots and is recovered with the aid of arresting gear similar to jets on an aircraft carrier. Over 500 RQ-7 Shadows are in operational use throughout the world carrying electro-optic/infrared imaging sensors and having a range of over 100km and a 4-hour on-target loiter time.

Our RQ-7 Shadow can't offer a 4 hour duration or a 100km range, but it is certainly a fantastic FPV platform with all of the highly practical features of the full size RQ-7, including the aerodynamically proven inverted V-tail, twin boom layout, center-mounted pusher motor, fixed tricycle undercarriage and the huge central nacelle giving a clear view for your cameras and sensors.

For the scale enthusiasts among us the kit builds into quite an accurate representation of the full-size Shadow and, at 2100mm wingspan the large scale enthusiasts won't be disappointed either as this one is nearly 1/2 scale!

The kit features a full set of components and 1:1 plans for wing assembly, laser cut parts from the highest quality balsa and ply to make construction fast, accurate and enjoyable to build!  A full accessory pack, with covering material and decals to provide a complete finished scale replica model.

Features

  • Highly capable FPV platform
  • Accurate laser cut parts
  • Quality balsa and plywood construction
  • Full accessory pack with covering material and decals
  • Easy to follow manual with 1:1 plans for wing assemvly
  • Large payload capacity
  • Landing gear included

Technical specifications

  • Wingspan: 2100mm (82.7")
  • Length: 1900mm (74.8")
  • Flying weight: about 4400g (9.7lbs) depending on power system
  • Motor: MC4220-410KV (Gas 9-15cc engine)
  • Prop: 15 inch
  • ESC: 80A 6S
  • Servo: 7 servos (17g*3pcs+37g *4pcs)

Kit Versions: 

  • Kit only (no electronics)
  • Kit+Film Pack (8M cement grey+2 sheets of decals) 
  • KIT+MC4220 410KV+15 inch wooden propeller+80A ESC+37g*4pcs; 17g*3pcs
  • KIT+MC4220 410KV+15 inch wooden propeller+80A ESC+37g*4pcs ;17g*3pcs+Film pack

Required (not included)

  • Recommended Radio and Receiver; ≥6CH
  • Lipo 6S 5200-8000mAh battery






: *
: *
: *
 

HiTec 7985mg

Description:
The HS-7985MG is a very high quality servo and perfect for 50cc (even for the rudder). Great in a 30cc but maybe overkill. It is fully programmable using Hi Tec's programmer. The combination of torque, speed, price and extreme holding power make it a favorite among pilots. new premium high speed HS-7985MG Digital Servo has the added benefit of our new G2 second generation programmable digital circuit. This circuit has twice the resolution of our original circuit while adding programmable overload protection. The technology does not stop at the circuit board, with high performance coreless motors, dual ball bearings, bushing supported gear shafts, dual ball bearing output shaft and our Heavy Duty Metal gear train the HS-7985MG will give you everything you need no matter what the demand.



Specifications:

  • Torque:
    • 144 oz/in at 4.8V (10.4 kg/cm)
    • 172 oz/in at 6V (12.4 kg/cm)
       
  • Speed:
    • .16 sec at 4.8V
    • .13 sec at 6V
       
  • Voltage: 4.8V - 6V
  • Weight: 2.18oz (62g)
  • Size: 1.57" x 0.78"x 1.45 in (40 x 20 x 37 mm)
     
  • Control System: +Pulse Width Control 1500usec Neutral
  • Required Pulse: 4.8-6.0 Volt Peak to Peak Square Wave
  • Operating Voltage Range: 4.8-6.0 Volts
  • Operating Temperature Range: -20° to +60° C (-4°F to +140°F)
  • Stall Torque (4.8V): 144oz/in. (10.4 kg/cm)
  • Stall Torque (6.0V): oz/in. (12.4 kg/cm)
  • Operating Angle: 45 Deg. one side pulse traveling 400usec
  • 360 Modifiable: Yes
  • Direction: Clockwise/Pulse Traveling 1500 to 1900usec
  • Idle Current Drain (4.8V): 3mA at stop
  • Idle Current Drain (6.0V): 3mA at stop
  • Current Drain (4.8V): 200mA/idle and 2.0 amps at lock/stall
  • Current Drain (6.0V): 240mA/idle and 3.0 amps at lock/stall
  • Dead Band Width: 2usec
  • Motor Type: Coreless Carbon Brush
  • Potentiometer Drive: 6 Slider Indirect Drive
  • Bearing Type: Dual Ball Bearing MR106
  • Gear Type: 3 Metal, 1 Metal Karbonite Gear
  • Connector Wire Length: 7" (178mm)

HS-7985MG

$89.99

Digital LED Servo Tester

Digital LED Servo Tester

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Description:

GT Power Servo Consistency Master.

With this cool device you can test up to 3 servos at a time for consistency and precision. With the GT Power servo tester you can see how servos react in three different testing modes. Manual, Neutral, and Automatic.

---

Manual Mode:: Turn the knob at different speeds however you want to check reaction time.

Neutral Mode:: Make the servo go back to the neutral position.

Automatic Mode:: "window wiper mode"- make the servo swing back and fourth at max angle.

---

Specs:

  • Connect 1-3 servos simultaneously
  • Test in 3 different modes
  • Easy to read labels
  • LED lights

QX-20423-Digital-Servo-tester

$12.99

Talon 60 ESC

Talon 60 ESC

Overview

Castle's Talon 90 ESC with heavy duty BEC is designed for today's servos - producing 9 amps of continuous power and its potential power peaking* at 20 amps!

Fixed wing - applications drawing up to 90 amps continuously on 6S. BEC is capable of powering most servo sets in planes - Talon 90 is ideal for our 30cc planes! The innovative case ensures cooling in even the toughest mounting locations.

*Peak indicates amperage susatainable for 0.5 seconds - long enough for most servos' current draw transients. Your setup may vary. Always confirm servo current draw befire the first flight.

Specs

Amperage: 60 & Up
Auto Cutoff: Programmable
BEC Voltage: 6V or 8V, user selectable; 9A continuous, 20A peak output
Brake: Programmable
Continuous Maximum Current: 90A
Height: 0.7 in (18mm)
Input Connector Types: Bare wire
Input Voltage: 3S-6S LiPo
Length: 3.14 in (80mm)
Output Connector Types: 5mm female bullets
PWM Frequency: Programmable
Type: Brushless
Weight: 3.0 oz (84.5 g)
Width: 1.7 in (43mm)

 

  • On-board selectable six-or eight-volt BEC
  • Adjustable low-voltage cutoff
  • Adjustable brake type
  • Adjustable PWM switching rate
  • Innovative case provides fan-free cooling
  • Works with 3S-6S LiPos

 

 

ESC-TALON-60

$69.95