| Raptor H650 Sea Land Air 490mm Wingspan 2.4GHz 6CH Smart Balance EPP RC Do you feel the need for speed? Check out this unique 3-1 Sea, Land and Air turbo prop jet! This is a High Speed Turbo Prop Sport 3D Jet that will takeoff and land on the water or land (launch from cement or asphalt road, sand stone land, park lawn, water, etc., can also be hand thrown)...How cool is that?! With the balanced Flight Controller pilots can perform 3D maneuvers like, 360 degree flips, front flip, back flip, and roll. The H650 is constructed with EPO crash resilient foam and it is pre-painted saving you time. If that's not enough, all waterproof servos, turbo prop, and ESC are factory pre-installed. This airplane is designed for High-Speed flying which is made possible with a powerful Brushless Motor for High-Performance flying. In case you were wondering, this model is one of the fastest EPO Turbo Prop jets on the market. And finally, it comes with 2 LED bars that are already pre-installed on the leading edge of the wings for some spectacular night flying! Complete RTF bundle with everything in the box and comes with a built in gyro system for rock solid flight stabilization. It flies absolutely great right out of box without having to do any additional setup. Its very beginner friendly with its built in flight stabilization system and offers plenty of flight time on single 2S 1000mAh battery. Key Features: - Powerful brushless motor
- Brushless ESC and waterproof servos
- Special high-density, durable waterproof EPO foam material...The entire aircraft is waterproof!
- Takeoff from land or water (Speed boat or plane!)
- Easy to build...just glue on wings and tail (glue included)
- SUPER FAST
- LEDs for night flying
- Gyro stabilizer Flight Control
Specifications: - Material : EPP
- Wingspan : 490mm
- Fuselage : 650mm
- Flight Distance : 1000M
- Remote Control Transmitter : 2.4Ghz 6CH mode 2
- Flight Control : XIUXIU FC *1
- Battery : 2S-1000mAh*1
- Charger : 2S charger*1
|
Big HLK-31 Land Sea Plane
Big Brother HLK-31 Land Sea Plane
Raptor H650 RTF
Raptor H650 Air Land and Sea RTF
HLK-31 Land and Sea 630mm Turbo Prop Jet w/Auto-return 3D Stunt RTF
HLK-31 Land and Sea 630mm Jet RTF Do you feel the need for speed? Check out the Dynam Meteor V2. This is a High Speed 70mm EDF Sport Jet that features retracts! How cool is that?! The Meteor V2 is constructed with EPO crash resilient foam and it is pre-painted saving you time. If that's not enough, all servos, 70mm Fan, and the 60Amp ESC are factory pre-installed. This airplane is designed for High-Speed flying which is made possible with a powerful Brushless Electric Ducted-Fan. The Fan Unit is is very well constructed for High-Performance flying. In case you were wondering, this model is absolutely one of the fastest EPO EDF jet on the market. Key Features: - Powerful 70mm EDF fan unit and motor
- 60A Brushless ESC with Switch-Mode BEC
- retractable landing gear
- Easy to build.
- SUPER FAST
Specifications: | Wingspan: | 35.8 inch (910mm) | | Overall Length: | 43.3 (1100mm) | | Flying Weight: | 38.8oz (1100g) w/Battery | | Fan Unit: | 70mm fan unit (installed with motor) | | Motor Size: | Powerful 400 high speed outrunner brushless motors (installed) | | Radio / Transmitter: | 5 Channel Required - (Not Included) | | Receiver: | 5+ Channel (Not Included) | | Servos: | 4 servos installed ( 4 x 9g ) | | Speed Control : | 1 x Dectrum 60A Brushless with Switch-Mode BEC (installed) | | Battery: | 14.8V 2600 mah 25C LiPo (Not Included) | | Charger: | NOT INCLUDED 2S - 4S lipo charger | | Flight Time: | Average (6-10 mins) | | | | | | |
|
HLK-31-Seaplane
$229.99 229.99
DLE 20cc Engine
+ Free Shipping (Continental US only!) If international customer, please contact us for shipping quote. You will be charged separately for shipping.
+ Free 2 Year warranty 
Description:
Glow power isn't the only option anymore. The DLE-20 not only fills the displacement gap, but includes a beam mount to make the glow-to-gas upgrade drop-in fast and easy. A rear pumper carb simplifies installation and adjustment of the DLE 20cc. A generous package of "extras" and electronic ignition for starting ease and top performance make the DLE 20 an attractive alternative to glow…and a solid buy for value and performance.
We supply a free 2 year warranty with our DLE 20, and also back it with our in house repair of DLE engines.
Download DLE 20 Manual
Specifications: - Stock Number: DLEG0020
- Displacement: 20 cc (1.22 cu in)
- Bore: 1.3 in (32 mm)
- Stroke: 1.0 in (25 mm)
- Weight: 28.9 oz (820 g)
- RPM Range: 1,750-9,000
- Output: 2.5 hp @ 9,000 rpm
- Requires: unleaded gasoline, 2-cycle oil, ignition battery & propeller
- Includes: electronic ignition, muffler, spark plug, gasket, bolts, throttle arm extension & manual
- Suggested Propellers: 16x8 17x6
- Suggested Break-in Prop: 16x8
- Ignition Battery: 4.8-6.0V NiCd or NiMH, 6.6V LiFe or 7.4V LiPo pack (LiPo use requires voltage regulator.)
- Compression Ratio: 10.5:1
- Gas/Oil Mix: Break in with Lawn Boy(or similar non synthetic oil) at 32:1 Ratio per gallon / Use RedLine oil at 50:1 for long term use after break in.
- Replacement Spark Plug: NGK CM6 (DLEG5510) or equivalent
- Weight Breakdown: Engine: 22.9 oz (650 g); Muffler: 1.8 oz (50 g); Ignition: 4.2 oz (120 g)
- Recommended Propeller: Hawk "C" type 17x6 (for 3d), 16x8 (sport/pattern)
|
DLE 35RA Engine
+ Free Shipping (Continental US only!) If international customer, please contact us for shipping quote. You will be charged separately for shipping.
+ Free 2 Year warranty
Description:
High performance in a compact package!
The DLE-35RA features a rear exhaust for the perfect tuned pipe setup. It also includes a newly designed piston with re-engineered skirt for less piston weight - resulting in such advantages as awesome throttle response, more power and longer engine life. Producing 400 more rpm than the DLE30, the DLE-35RA comes with engine standoffs, electronic ignition, spark plug and muffler.
Download DLE 35RA Mounting Template
Download DLE 35RA Manual Coming Soon
Specifications: - Displacement: 34.9 cc (2.13 cu in)
- Bore: 1.5 in (38.5 mm)
- Stroke: 1.17 in (35RA mm)
- Weight: 2.6 lb (42oz)
- RPM Range: 1,600-8,500
- Output: 4.1 hp @ 8,500 rpm
- Requires: unleaded gasoline, oil, ignition battery & propeller
- Includes: muffler, spark plug, gasket, bolts, machined aluminum standoffs, throttle arm extension
- Suggested Propellers: 18x6, 18x8, 19x6, 19x8, 20x8, 20x6
- Suggested Break-in Prop: 18x6
- Ignition Battery: 4.8-6.0V NiCd or NiMH, 6.6V LiFe or 7.4V LiPo pack (LiPo use requires voltage regulator.)
- Compression Ratio: 7.6:1
- Gas/Oil Mix: Break in with Lawn Boy(or similar non synthetic oil) at 32:1 Ratio per gallon / Use RedLine oil at 50:1 for long term use after break in.
- Replacement Spark Plug: NGK CM6 (DLEG5510) or equivalent
- Weight Breakdown: Engine: 32.1 oz (910 g); Muffler: 2.6 oz (60 g); Ignition: 5.2 oz (120g)
- Recommended Propeller: Redwing RC 3d Props - type 19x6 19x8 20x6 20x8 Propeller
|
SmartDesign V3 "Trouble Free" Tail Wheel Assembly
Description: This tail wheel assembly is extremely efficient and reliable. With fewer parts, there is less to worry about and the solid construction makes it the go-to choice for pilots at any skill level. The new V2 design incorporates ball bearings for smooth motion, ball-joint to rudder steering connection, wider CF mounting plate, and slightly larger wheels that the v1. "Trouble Free" means just that... no more worrying about screws falling out or loss of control. Make the switch today by installing the SmartDesign Tail Wheel!!! CNC Aluminum & C.F. Tail Wheel Assembly for 20cc to 220cc
Features: - Extremely Reliable
- Mechanically Efficient Design
- Simple and Solid Construction
- Fewer parts needed for install
- Ball Bearings
Pricing - 20-40cc: $27.00
- 50-70cc: $34.99
- 85-120cc: $44.99
- 150cc-220cc: $54.00
Weight - 20-40cc: 1.2 oz
- 50-70cc: 1.6 oz
- 85-120cc: 2.2 oz
- 150cc-220cc: 2.6 oz
Don't forget to check out our Aluminum Hub Wheels! They are excellent replacements for landing gears and tail wheels. Please see sizing chart below. 
|
