ALLOY SAILWINCH DRUM 42MM

Description:
The HS-7985MG is a very high quality servo and perfect for 50cc (even for the rudder). Great in a 30cc but maybe overkill. It is fully programmable using Hi Tec's programmer. The combination of torque, speed, price and extreme holding power make it a favorite among pilots. new premium high speed HS-7985MG Digital Servo has the added benefit of our new G2 second generation programmable digital circuit. This circuit has twice the resolution of our original circuit while adding programmable overload protection. The technology does not stop at the circuit board, with high performance coreless motors, dual ball bearings, bushing supported gear shafts, dual ball bearing output shaft and our Heavy Duty Metal gear train the HS-7985MG will give you everything you need no matter what the demand.



Specifications:

• Torque:
  • 144 oz/in at 4.8V (10.4 kg/cm)
  • 172 oz/in at 6V (12.4 kg/cm)
     
• Speed:
  • .16 sec at 4.8V
  • .13 sec at 6V
     
• Voltage: 4.8V - 6V
• Weight: 2.18oz (62g)
• Size: 1.57" x 0.78"x 1.45 in (40 x 20 x 37 mm)
   
• Control System: +Pulse Width Control 1500usec Neutral
• Required Pulse: 4.8-6.0 Volt Peak to Peak Square Wave
• Operating Voltage Range: 4.8-6.0 Volts
• Operating Temperature Range: -20° to +60° C (-4°F to +140°F)
• Stall Torque (4.8V): 144oz/in. (10.4 kg/cm)
• Stall Torque (6.0V): oz/in. (12.4 kg/cm)
• Operating Angle: 45 Deg. one side pulse traveling 400usec
• 360 Modifiable: Yes
• Direction: Clockwise/Pulse Traveling 1500 to 1900usec
• Idle Current Drain (4.8V): 3mA at stop
• Idle Current Drain (6.0V): 3mA at stop
• Current Drain (4.8V): 200mA/idle and 2.0 amps at lock/stall
• Current Drain (6.0V): 240mA/idle and 3.0 amps at lock/stall
• Dead Band Width: 2usec
• Motor Type: Coreless Carbon Brush
• Potentiometer Drive: 6 Slider Indirect Drive
• Bearing Type: Dual Ball Bearing MR106
• Gear Type: 3 Metal, 1 Metal Karbonite Gear
• Connector Wire Length: 7" (178mm)

HobbyWing WiFi Express Smartphone ESC Module

Miracle Deluxe Fuel Filter

Description:
Using a fuel filter can help to prevent damage to your engine from dirt and particles that may enter your fuel. This Fuel Filter uses a very fine filter that will catch any particles that would interfere with your engine's performance. It has a clear center so you can see how easily the fuel is passing.

You can easily take it apart to clean off the filter tube. It is made of CNC alloy. It is 50mm in length and has a 4mm nipple for standard medium tubing that we sell.

The inner diameter is a large 3mm, to ensure smooth consistent flow of your fuel as well. It also comes with a clip you can screw or glue down to easily secure it in your plane.

A good buy for sure!