3D Aerobatic Electric

30cc Yak 55 - Purple or Green 

Description:

Now with Carbon Fiber Reinforcements!

The Yak 55M was first built in the late 1980s based off the original Yak55. It further increased the roll rate and agility to create the aerobatic monster known as the Yak 55M!

The Yak 55M like its related Yak 54, has great qualities for both 3d and precision flying. It has very scale features that closely match the original Yak 55M.

The unique scheme on this Yak 55M was created by professional designer Xavier Stevens! With its striking contrast and beautiful curves, this Yak 55M is sure to catch the attention of the crowd wherever you fly!

It is lightweight enough to fly well, but as ALL our Redwing models, this 30cc Yak 55m has been reinforced in the "right places" such as the fire wall, landing gear, and other vulnerable spots.



Videos on this plane:





Buy Replacement Parts
Product Manual




Specifications:

• Wing span: 73"
• Wing area: 1005 sq. in.
• All up flying weight: 10.5-12lb depending on build style
• Length: 66"
• Cowl:
  • Inside Width: 8.5" (215.9mm)
  • Inside Height: 8.5" (215.9mm)
• Engine: (Any 30-36cc engine) Recommended: DLE 30, DLE 35, PTE 36
• Radio: 6 channel recommended (4ch possible)
• Recommended Spinner Size: 3"
• Recommended CG: 5.25" to 5.5" from LE at Root of the wing
• Recommended Prop Size:
  • 18x8/10, 20x10 for sport
  • 18x619x6/8, 20x6/8 for 3d
• Recommended Throws: adjust to liking as you fly
  • Low Rates Settings | High Rate Settings
  • Rudder: 30 degrees, 20% expo | 50 degrees, 35% expo
  • Ailerons: 25 degrees, 25% expo | 40 degrees, 40% expo
  • Elevator: 20 degrees, 20% expo | 45 degrees, 40% expo

Features:

• Removable stab
• Ringed cowl
• Adjustable push rods
• Canister ready
• Carbon Fiber Stringers run full length of fuse
• Painted Control horns to match paint scheme of plane
• Vortex Generators
• Servo Reinforcement pieces

We DO ship our planes internationally!

Please contact us with your location for more specific cost.

Savage Bobber Slow Flyer 600mm PP Foam PNP Kit

EPP Edge 540 3D Airplane 43.3" (1100MM) Wingspan 

EPP SkyLeaf ST Profile 3D Aerobatic RC Airplane Kit

60" (1540mm) Extra 260 (70e) ARF/PNP

Pre-order sale $100 off! Estimated Arrival Early Feb 2024

• This is an EXTREMELY popular product and quantiities limited, so we STRONGLY recommend pre-ordering if you wish to receive one from the first shipment.

Credit Card or other payment will be charged at the time of order.

39" (1000mm) Extra 330 ARF/PNP

Redwing RC has partnered with Dancing Wings to bring you this new 39" Extra 330 3D aerobatic model available as an ARF/PNP. 

Pre-order sale $50 off! Estimated Arrival Late Sept 2023

• This is an EXTREMELY popular product and quantiities limited, so we STRONGLY recommend pre-ordering if you wish to receive one from the first shipment.

Credit Card or other payment will be charged at the time of order.

Description:

For anyone who loves their 30cc plane but is looking to upgrade, Redwing RC's new 50cc EXTRA 330 is the perfect bigger-scale model to impress other RC enthusiasts. Available in red and blue, the EXTRA 330 is sure to go the EXTRA mile in performance and quality.

Equipped with the same great features as our other 50cc planes, you can't beat the price of these new stylish, quality built models.

Don't wait! Purchase to reserve one below and be the first to show off this sexy new style!

Product Manual
 

Specifications:*(More Coming Soon)*

• Wing span: 2260mm / 88.97"
• Wing area: 1480 sq. inches
• All up flying weight: 16.4 lbs
• Length: 2065mm / 84.3"
• Cowl
  • Inside diameter: 10.5" (266.7mm)
  • Inside height: 8.75" (222.25mm)
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
   
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
• Engine: DLE 55, DLE 55RA
• Radio: 6 channel recommended (4ch possible)
• Recommended Spinner Size:
• Recommended CG: 6.75” to 7.25” from the LE at the root of the wing
• Recommended Prop Size:
• Recommended Throws:
  • Low Rates Settings | High Rate Settings
  • Rudder: |
  • Ailerons: |
  • Elevator: |

Features:

• Removable stab
• Ringed cowl
• Adjustable push rods
• Canister ready
• Carbon fiber landing gear and accessories
• Carbon fiber Rei enforcements:
  • CF stringers in fuse
  • CF stringers in wings
  • CF wing reinforcement tubes
  • CF retention pins in stabs/wings
• Fiberglass stab mounts
• Painted matching spinner (Optional)
• Fast fly and easy build features, such as : Pre-drilled hinges, pre-plumbed fuel tank, and pre-installed rudder cable
• NOW COME WITH SIDE FORCE GENERATORS!

tml', 'popup', 'width=500,height=500'); return false">

35cc Nemesis 74" (1880mm)

Pre-order sale $100 off! Estimated Arrival late Aug 2023

• This is an EXTREMELY popular product and quantiities limited, so we STRONGLY recommend pre-ordering if you wish to receive a unit from the first shipment.

Credit Card or other payment will be charged at the time of order.

$30 Container Freight charge has been added to this item due to excessive Container prices!

We are growing again with the addition of the 30cc "Strong Design" Edge 540 V3. This 30cc SD EDGE was designed from the ground up by aeronautical engineer Adam Strong. Tested, perfected and approved, to make sure this is going to be the best 30cc Edge out there, in flight and quality/features. It is carbon fiber rich, in the wings fuselage and the accessories.

The Edge 540 is known for its unsurpassed harrier and slow alpha flight capability and this 30cc version is no different, and specially designed by Adam Strong to take advantage of the scale planes tendencies, but added thought into what you want out of a modern day RC plane. Prepare to be amazed!

Enjoy smooth clean knife edge and similar maneuvers as well as very predictable smooth 3D. Very even rolling harriers, easy hover and torque rolls - this plane is a GREAT learning tool with the wonderful advantages of gasoline. 

This new 30cc Edge 540 comes with the same great features that Redwing provides with all of our planes. It is set up and ready for a DLE 30 or 35RA to be mounted right in - or try going electric with our new Tomcat Electric Motors with a little adaptation. A neat feature of the 30cc Edge is that is has a carbon fiber reinforcements in the fuselage and wings for added strength.

The 30cc Edge 540 is available in 3 new attractive schemes designed by Adam Strong. Get them while they are in stock. This is a great new plane so don't let this one slip by.

Product Manual

Check out this awesome plane in action!

Specifications:

• Wing span:
  • With tips:78.5
  • Without tips: 75"
• Wing area: 1145 sq. inches (wings and stabs measured ONLY) More surface area when considering fuselage
• All up flying weight: 10.5 to 12 lbs.
• Engine: DLE 30, DLE 35RA or similar, or Equivalent Electric System
• Recommended Spinner Size: 3"
• Recommended CG: 5" to 5.75" from the front half of wing tube
• Recommended Prop Size: 18x8 to 20x8
• Recommended Throws: adjust to liking as you fly LOW MED HIGH

  AIL 1.75”/30% 2.75”/40% 4”/60%

  ELE 2.5”/30% 3.25”/ 40% 4”/55%

  RUD 2.5”/20% 3”/ 30% 4.25”/40%

  
  
  
  
  

Features:

• Removable stab
• Ringed cowl
• Canister Tunnel built in
• Painted matching spinner (available separately)
• Includes a black plastic spinner
• Optional integrated air deflector for venting hot cowl air
• Fast Fly Feature: Pre-installed hinges (except rudder)
• Carbon Fiber Retention Pins in stabs
• Fiberglass tabs on stabs (stronger than wood)
• Carbon Fiber Wing Tube
• Metal Servo arm set
• Removable Side Force Generators / Racing Wing tips

We DO ship our planes internationally!

Please contact us with your location for more specific cost.

Description:

For anyone who loves their 30cc plane but is looking to upgrade, Redwing RC's new 50cc EXTRA 330 is the perfect bigger-scale model to impress other RC enthusiasts. Available in red and blue, the EXTRA 330 is sure to go the EXTRA mile in performance and quality.

Equipped with the same great features as our other 50cc planes, you can't beat the price of these new stylish, quality built models.

Don't wait! Purchase to reserve one below and be the first to show off this sexy new style!

Product Manual
 

Specifications:*(More Coming Soon)*

• Wing span: 2260mm / 88.97"
• Wing area: 1480 sq. inches
• All up flying weight: 16.4 lbs
• Length: 2065mm / 84.3"
• Cowl
  • Inside diameter: 10.5" (266.7mm)
  • Inside height: 8.75" (222.25mm)
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
   
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
• Engine: DLE 55, DLE 55RA
• Radio: 6 channel recommended (4ch possible)
• Recommended Spinner Size:
• Recommended CG: 6.75” to 7.25” from the LE at the root of the wing
• Recommended Prop Size:
• Recommended Throws:
  • Low Rates Settings | High Rate Settings
  • Rudder: |
  • Ailerons: |
  • Elevator: |

Features:

• Removable stab
• Ringed cowl
• Adjustable push rods
• Canister ready
• Carbon fiber landing gear and accessories
• Carbon fiber Rei enforcements:
  • CF stringers in fuse
  • CF stringers in wings
  • CF wing reinforcement tubes
  • CF retention pins in stabs/wings
• Fiberglass stab mounts
• Painted matching spinner (Optional)
• Fast fly and easy build features, such as : Pre-drilled hinges, pre-plumbed fuel tank, and pre-installed rudder cable
• NOW COME WITH SIDE FORCE GENERATORS!

tml', 'popup', 'width=500,height=500'); return false">

Description:

For anyone who loves their 30cc plane but is looking to upgrade, Redwing RC's new 50cc EXTRA 330 is the perfect bigger-scale model to impress other RC enthusiasts. Available in red and blue, the EXTRA 330 is sure to go the EXTRA mile in performance and quality.

Equipped with the same great features as our other 50cc planes, you can't beat the price of these new stylish, quality built models.

Don't wait! Purchase to reserve one below and be the first to show off this sexy new style!

Product Manual
 

Specifications:*(More Coming Soon)*

• Wing span: 2260mm / 88.97"
• Wing area: 1480 sq. inches
• All up flying weight: 16.4 lbs
• Length: 2065mm / 84.3"
• Cowl
  • Inside diameter: 10.5" (266.7mm)
  • Inside height: 8.75" (222.25mm)
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
   
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
• Engine: DLE 55, DLE 55RA
• Radio: 6 channel recommended (4ch possible)
• Recommended Spinner Size:
• Recommended CG: 6.75” to 7.25” from the LE at the root of the wing
• Recommended Prop Size:
• Recommended Throws:
  • Low Rates Settings | High Rate Settings
  • Rudder: |
  • Ailerons: |
  • Elevator: |

Features:

• Removable stab
• Ringed cowl
• Adjustable push rods
• Canister ready
• Carbon fiber landing gear and accessories
• Carbon fiber Rei enforcements:
  • CF stringers in fuse
  • CF stringers in wings
  • CF wing reinforcement tubes
  • CF retention pins in stabs/wings
• Fiberglass stab mounts
• Painted matching spinner (Optional)
• Fast fly and easy build features, such as : Pre-drilled hinges, pre-plumbed fuel tank, and pre-installed rudder cable
• NOW COME WITH SIDE FORCE GENERATORS!

tml', 'popup', 'width=500,height=500'); return false">

TopRC Thunder Sport Trainer 54.3"(1380mm) PNP 

Limited time FREE shipping lower 48 USA only!! Contact us at [email protected] to calculate international shipping cost.

EXTRA-NG 3D Airplane 47.2" (1200MM) Wingspan (Electric EPP Foam)