ESC

Overview

Castle's Talon 90 ESC with heavy duty BEC is designed for today's servos - producing 9 amps of continuous power and its potential power peaking* at 20 amps!

Fixed wing - applications drawing up to 90 amps continuously on 6S. BEC is capable of powering most servo sets in planes - Talon 90 is ideal for our 30cc planes! The innovative case ensures cooling in even the toughest mounting locations.

*Peak indicates amperage susatainable for 0.5 seconds - long enough for most servos' current draw transients. Your setup may vary. Always confirm servo current draw befire the first flight.

Specs

• On-board selectable six-or eight-volt BEC
• Adjustable low-voltage cutoff
• Adjustable brake type
• Adjustable PWM switching rate
• Innovative case provides fan-free cooling
• Works with 3S-6S LiPos

Overview

Castle Phoenix Edge 120HV Brushless ESC

The auxiliary advantage.

The next evolution in speed controller technology has arrived within the Phoenix Edge series of ESCs. The Edge series introduces a user programmable auxiliary wire capable of functions modelers have only dreamed of, until now! The white auxiliary wire can be used for input adjustments mid-flight, serve as an audible beacon after an “unexpected landing”, act as an RPM output for 3-axis gyros that support RPM sensors, be used as an ESC arming lock or as a receiver arming lock. Combined with the data logging capability the Edge series of controllers offer, users can enjoy unparalleled versatility.

Specifications

• Input Voltage - MIN: 3S LiPo | MAX: 12S LiPo
• Max Continuous Amp (at full throttle) - 120amps
• Length x Width x Height - 3.3" x 2.0" x .09" (83.6mm x 50.8mm x 23.2mm)
• Weight with wires - 5.2 oz (148.8g)
• Weight without wires - 2.4 oz (69.4g)
• Fully programmable

TEMPORARILY BACK ORDERED. Add to cart to PRE ORDER and we will ship ASAP.

Overview

The new Dualsky XC-45-LITE speed control is economically priced and perfect for 2-3S LiPO powered aircraft. The Dualsky XC-45-LITE speed control is compatible with the Dualsky ProgCard V2 and has a burst rating of 60A. The BEC is rated at 5.2V 3A and will punch this out all day unlike other low priced speed controls.

This ESC works well with the Dualsky XM 3542, 950KV motor

Specifications

• Dimensions: 67x 25x 7mm(L x W x D)
• Weight: 38g (with wires)
• Number of Cell:
  • LiPo 2-3s, 7.4-11.1V
• Resistance(Ri)(Ohm): 0.0026
• Max Cont.  Current & Max Cont.Output: 45A, 500W
• Max Burst Current & Max Burst Output: 60A, 666W
• BEC / Dissipative Power: 5.2V/3A (Linear)
• Programmable: Throttle + ProgCARD V2
• Signal Wire: 300MM JR

Platinum Pro 120A V4 ESC, for Premium Aircraft 

Platinum Pro 120A V4 ESC, for Premium Aircraft 

Platinum Pro 120A V4 ESC, for Premium Aircraft 

Platinum Pro 120A V4 ESC, for Premium Aircraft 

Platinum Pro 120A V4 ESC, for Premium Aircraft 

Platinum Pro 120A V4 ESC, for Premium Aircraft 

Platinum Pro 120A V4 ESC, for Premium Aircraft 

Replacement Switch and wire for Miracle switches.

With this switch and wire, you can easily replace a switch in a Miracle RC product. Perfect for if you have a crash and you want to be sure the switch is in perfect working condition. Or if you accidently damage your Miracle switch while working with it.

Just simply unscrew your old Miracle switch, loosen the grub screw that holds the plastic plug, and place the new one in. In about 5 minutes you'll have a brand new conditioned Miracle switch
 

Replacement Switch and wire for Miracle switches.

With this switch and wire, you can easily replace a switch in a Miracle RC product. Perfect for if you have a crash and you want to be sure the switch is in perfect working condition. Or if you accidently damage your Miracle switch while working with it.

Just simply unscrew your old Miracle switch, loosen the grub screw that holds the plastic plug, and place the new one in. In about 5 minutes you'll have a brand new conditioned Miracle switch