Description:
The Optical Kill Switch for gas rc planes, allows you to safely and remotely kill your electronic ignition. It is Fiber Optically Coupled to isolate your ignition system from your radio system so there is NO interference



Features:

• Includes a remote mountable bright LED to indicate when the ignition is armed.
• Fiber Optic coupled input/output.
• Li-Po/Li-lon/A123/Ni-Mh/NiCad Input.
• Up to 20 Volt 16 amp MOS-FET(IRF7456) output.
• Low to 3Volt 3amp output.
• Low Voltage Drop-Less than 150mv.
• 100% Surface Mount Technology.
• Heavy Gauge Wires,universal connectors.
• Small and light weight –only 0.3 OZ!(8g)
• Reverse Bettery input protection.
• Shut down the transmitter power or receiver to cut off automatically when kill engine





 
•  
•  

Tachometer, RCexl Mini Tachometer

Description:
You can use this RCexl mini tachometer to hook up directly to the ignition on the JC 28cc, or DLE engines to be able to view your RPM's at a glance. You can mount this mini-tach in your cockpit, or other visible area, and it runs off the battery power already supplied to your ignition. This is the newest RCexl (RCxl RCexcel) Version



Specifications:

• Input Voltage between 3.5 and 8.4 volts
• Current Consumption 25-60mA
• Size: 41mmx17mmx12mm
• Weight: .3oz

 

 

 

 

Features:

• Indicates up to 30,000 RPM
• Has and ULTRA-Bright LED so it can be easily read in daylight
• Standard Futaba plug
• Includes a Y Harness

 

 

 

Hall Sensor Tester, Rcexl Gas Engine CDI Ignition Tester

This is a timing and testing kit for RC gas engines.

 

This kit will allow you to check the working condition of your ignition without needing to restart the engine.

 

Analog engine speeds between 400 RPM ~ 20000 RPM can be used to check for interferences and radio range check.

An LED will light up when everything is working properly.

Single & Dual Sensor Tester Universal Sensor Timing Device Ignition Hall Sensor

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Description:

GT Power Servo Consistency Master.

With this cool device you can test up to 3 servos at a time for consistency and precision. With the GT Power servo tester you can see how servos react in three different testing modes. Manual, Neutral, and Automatic.

---

Manual Mode:: Turn the knob at different speeds however you want to check reaction time.

Neutral Mode:: Make the servo go back to the neutral position.

Automatic Mode:: "window wiper mode"- make the servo swing back and fourth at max angle.

---

Specs:

• Connect 1-3 servos simultaneously
• Test in 3 different modes
• Easy to read labels
• LED lights

RCEXL CDI Ingition Tester, Rcexl CDI Electronic Signal Generator Ignition box Test

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Description:

GT Power Servo Consistency Master.

With this cool device you can test up to 3 servos at a time for consistency and precision. With the GT Power servo tester you can see how servos react in three different testing modes. Manual, Neutral, and Automatic.

---

Manual Mode:: Turn the knob at different speeds however you want to check reaction time.

Neutral Mode:: Make the servo go back to the neutral position.

Automatic Mode:: "window wiper mode"- make the servo swing back and fourth at max angle.

---

Specs:

• Connect 1-3 servos simultaneously
• Test in 3 different modes
• Easy to read labels
• LED lights

Spark plug for DLE Engines.
 

Description:
The Optical Kill Switch for gas rc planes, allows you to safely and remotely kill your electronic ignition. It is Fiber Optically Coupled to isolate your ignition system from your radio system so there is NO interference



Features:

• Includes a remote mountable bright LED to indicate when the ignition is armed.
• Fiber Optic coupled input/output.
• Li-Po/Li-lon/A123/Ni-Mh/NiCad Input.
• Up to 20 Volt 16 amp MOS-FET(IRF7456) output.
• Low to 3Volt 3amp output.
• Low Voltage Drop-Less than 150mv.
• 100% Surface Mount Technology.
• Heavy Gauge Wires,universal connectors.
• Small and light weight –only 0.3 OZ!(8g)
• Reverse Bettery input protection.
• Shut down the transmitter power or receiver to cut off automatically when kill engine




 
•  

Spark plug for DLE Engines.
 

Spark plug for DLE Engines.
 

 RCEXL Universal On Board Glow System Methanol Engine Ignition With LED Indicator

Fuel clunks are a must for aerobatic flying. It insures that fuel is always flowing to the engine because the fuel line will follow gravity inside your tank. Without one, you increase the chance that your plane may stall when flying inverted or performing different maneuvers. Installing a fuel clunk is simple to install and an investment that any serious pilot should make.

13x16mm

.4 oz

RCEXL CM6 (10mm) Single Cylinder Ignition (NEW6.0V - 14.4V) For DLE 20/30/55/61/85
 

RCEXL CM6 (10mm) Single Cylinder Ignition (NEW6.0V - 14.4V) For DLE 20/30/55/61/85