30cc Planes

This airframe is currently out of stock. No current ETA on a new shipment.”
 

Description:

Now with Carbon Fiber Reinforcements!

The Redwing RC Stinson Reliant SR9 30cc, is a VERY scale replica of the original plane, built in the 1930s by Aviation Manufacturing Corp. Originally powered by a radial engine, this 30cc Stinson is built to accept the DLE 30, or DLE 35 engine. We recommend a Pitts muffler for the DLE 30, or just going with the DLE 35RA.

The latter Stinson Reliant (SR7 through SR9 and later) had the unique GULL shaped wing, that you see in our scale model. Impressive in photos and EVEN more so in life! You will fall in love with the subtle beauty of this plane.

Go ahead, click around on those photos again and fall deeper in love, and order one up now!

Golden Age lovers will be all over this IMAA legal 30cc Stinson Reliant SR9. It is one of the most comfortable golden age planes you will EVERY fly! Comes in slow and steady for landings, and has very smooth predictable flight. No white knuckles with this scale 30cc Stinson SR9


*PLEASE NOTE: Both the Red and the Yellow Schemes have the same features- Door, Ladder, Flaps, etc.

*Images show optional graphics*


Buy Replacement Parts
Product Manual


Video:

Specifications:

• Wing span: 86"
• Wing area: 1020 sq. in.
• All up flying weight: 10-12 lbs. depending on build style
• Length: 58"
• Cowl:
  • Inside Width: 7" (177.8mm)
  • Inside Height: 7" (177.8mm)
• Engine: DLE 30, DLE 35RA, PTE 36
• Radio: 6 channel recommended (4ch possible)
• Recommended Spinner Size: Prop nut
• Recommended CG: Front edge of wing tube to 1/4" in front of the wing tube
• Recommended Prop Size:
  • 18x6, 19x6, 20x6
• Recommended Throws: adjust to liking as you fly
  • Low Rates Settings | High Rate Settings
  • Rudder: 25 degrees, 20% expo | 45 degrees, 35% expo
  • Ailerons: 25 degrees, 25% expo | 40 degrees, 40% expo
  • Elevator: 20 degrees, 20% expo | 40 degrees, 40% expo

Features:

• Removable stab
• Ringed cowl
• Adjustable push rods
• Aluminum landing gear
• Carbon fiber reinforcement tubes in wings
• Fast fly and easy build features, such as : Pre-drilled hinges, pre-plumbed fuel tank, and pre-installed rudder cable
• Scale features: Door, Ladder, and functional flaps.

Description:

Now with Carbon Fiber Reinforcements!

The Redwing RC Stinson Reliant SR9 30cc, is a VERY scale replica of the original plane, built in the 1930s by Aviation Manufacturing Corp. Originally powered by a radial engine, this 30cc Stinson is built to accept the DLE 30, or DLE 35 engine. We recommend a Pitts muffler for the DLE 30, or just going with the DLE 35RA.

The latter Stinson Reliant (SR7 through SR9 and later) had the unique GULL shaped wing, that you see in our scale model. Impressive in photos and EVEN more so in life! You will fall in love with the subtle beauty of this plane.

Go ahead, click around on those photos again and fall deeper in love, and order one up now!

Golden Age lovers will be all over this IMAA legal 30cc Stinson Reliant SR9. It is one of the most comfortable golden age planes you will EVERY fly! Comes in slow and steady for landings, and has very smooth predictable flight. No white knuckles with this scale 30cc Stinson SR9


*PLEASE NOTE: Both the Red and the Yellow Schemes have the same features- Door, Ladder, Flaps, etc.

*Images show optional graphics*


Buy Replacement Parts
Product Manual


Video:

Specifications:

• Wing span: 86"
• Wing area: 1020 sq. in.
• All up flying weight: 10-12 lbs. depending on build style
• Length: 58"
• Cowl:
  • Inside Width: 7" (177.8mm)
  • Inside Height: 7" (177.8mm)
• Engine: DLE 30, DLE 35RA, PTE 36
• Radio: 6 channel recommended (4ch possible)
• Recommended Spinner Size: Prop nut
• Recommended CG: Front edge of wing tube to 1/4" in front of the wing tube
• Recommended Prop Size:
  • 18x6, 19x6, 20x6
• Recommended Throws: adjust to liking as you fly
  • Low Rates Settings | High Rate Settings
  • Rudder: 25 degrees, 20% expo | 45 degrees, 35% expo
  • Ailerons: 25 degrees, 25% expo | 40 degrees, 40% expo
  • Elevator: 20 degrees, 20% expo | 40 degrees, 40% expo

Features:

• Removable stab
• Ringed cowl
• Adjustable push rods
• Aluminum landing gear
• Carbon fiber reinforcement tubes in wings
• Fast fly and easy build features, such as : Pre-drilled hinges, pre-plumbed fuel tank, and pre-installed rudder cable
• Scale features: Door, Ladder, and functional flaps.

30cc Extra Red

Features:

We DO ship our planes internationally!

Please contact us with your location for more specific cost.

The J3 92" Piper Cub is an amazing aircraft for smooth flights and a very scale appearance. The 30cc Piper Cub form RedwingRC has a beautiful color scheme that helps with orientation and leaves you plenty of room for custom graphics. The 30cc Piper Cub is built with high quality balsawood and provides a lightweight airframe that is ridged and strong in all the right places.

The 30cc Piper Cub was made to be an outstanding aircraft. The large rudder, large control surfaces, and aerodynamic nose makes this a very responsive plane in the air.

As with all RedwingRC planes, the 30cc Piper Cub has quality hardware and is a fun build.

Enjoy the sky with the 30cc J3 Piper Cub available at RedwingRC!!!


Flight Video


 

Specifications:

• Wing span: 92" / 2337
• Wing area: 78.58sq.dm
• All up flying weight:
• Length: 57.6" / 1462mm
• Cowl:
  • Inside Width:
  • Inside Height:
• Engine: DLE 30, DLE 35RA or similar, or Equivalent Electric System
• Recommended Spinner Size: 3"
• Recommended CG:
• Recommended Prop Size:
  •  
• Recommended Throws: adjust to liking as you fly
  • Low Rates Settings | High Rate Settings
  • Rudder:|
  • Ailerons: |
  • Elevator: |

Features:

• Removable stab
• Ringed cowl
• Adjustable push rods
• Canister ready
• Fiberglass stab mounts
• Painted matching spinner (optional)
• Fast fly and easy build features, such as : pre-drilled hinges, pre-plumbed fuel tank, pre-installed rudder cable,

We DO ship our planes internationally!

Please contact us with your location for more specific cost.

The J3 92" Piper Cub is an amazing aircraft for smooth flights and a very scale appearance. The 30cc Piper Cub form RedwingRC has a beautiful color scheme that helps with orientation and leaves you plenty of room for custom graphics. The 30cc Piper Cub is built with high quality balsawood and provides a lightweight airframe that is ridged and strong in all the right places.

The 30cc Piper Cub was made to be an outstanding aircraft. The large rudder, large control surfaces, and aerodynamic nose makes this a very responsive plane in the air.

As with all RedwingRC planes, the 30cc Piper Cub has quality hardware and is a fun build.

Enjoy the sky with the 30cc J3 Piper Cub available at RedwingRC!!!


Flight Video


 

Specifications:

• Wing span: 92" / 2337
• Wing area: 78.58sq.dm
• All up flying weight:
• Length: 57.6" / 1462mm
• Cowl:
  • Inside Width:
  • Inside Height:
• Engine: DLE 30, DLE 35RA or similar, or Equivalent Electric System
• Recommended Spinner Size: 3"
• Recommended CG:
• Recommended Prop Size:
  •  
• Recommended Throws: adjust to liking as you fly
  • Low Rates Settings | High Rate Settings
  • Rudder:|
  • Ailerons: |
  • Elevator: |
     

Features:

• Adjustable push rods
• Aluminum Spinner (optional)
• Fast fly and easy build features, such as : pre-drilled hinges

We DO ship our planes internationally!

Please contact us with your location for more specific cost.

Description:

We are growing again with the addition of the 30cc "Strong Design" Edge 540 V3. This 30cc SD EDGE was designed from the ground up by aeronautical engineer Adam Strong. Tested, perfected and approved, to make sure this is going to be the best 30cc Edge out there, in flight and quality/features. It is carbon fiber rich, in the wings fuselage and the accessories.

The Edge 540 is known for its unsurpassed harrier and slow alpha flight capability and this 30cc version is no different, and specially designed by Adam Strong to take advantage of the scale planes tendencies, but added thought into what you want out of a modern day RC plane. Prepare to be amazed!

Enjoy smooth clean knife edge and similar maneuvers as well as very predictable smooth 3D. Very even rolling harriers, easy hover and torque rolls - this plane is a GREAT learning tool with the wonderful advantages of gasoline. 

This new 30cc Edge 540 comes with the same great features that Redwing provides with all of our planes. It is set up and ready for a DLE 30 or 35RA to be mounted right in - or try going electric with our new Tomcat Electric Motors with a little adaptation. A neat feature of the 30cc Edge is that is has a carbon fiber reinforcements in the fuselage and wings for added strength.

The 30cc Edge 540 is available in 3 new attractive schemes designed by Adam Strong. Get them while they are in stock. This is a great new plane so don't let this one slip by.

Product Manual

Check out this awesome plane in action!

Specifications:

• Wing span:
  • With tips:78.5
  • Without tips: 75"
• Wing area: 1145 sq. inches (wings and stabs measured ONLY) More surface area when considering fuselage
• All up flying weight: 10.5 to 12 lbs.
• Engine: DLE 30, DLE 35RA or similar, or Equivalent Electric System
• Recommended Spinner Size: 3"
• Recommended CG: 5" to 5.75" from the front half of wing tube
• Recommended Prop Size: 18x8 to 20x8
• Recommended Throws: adjust to liking as you fly LOW MED HIGH

  AIL 1.75”/30% 2.75”/40% 4”/60%

  ELE 2.5”/30% 3.25”/ 40% 4”/55%

  RUD 2.5”/20% 3”/ 30% 4.25”/40%

  
  
  
  
  

Features:

• Removable stab
• Ringed cowl
• Canister Tunnel built in
• Painted matching spinner (available separately)
• Includes a black plastic spinner
• Optional integrated air deflector for venting hot cowl air
• Fast Fly Feature: Pre-installed hinges (except rudder)
• Carbon Fiber Retention Pins in stabs
• Fiberglass tabs on stabs (stronger than wood)
• Carbon Fiber Wing Tube
• Metal Servo arm set
• Removable Side Force Generators / Racing Wing tips

We DO ship our planes internationally!

Please contact us with your location for more specific cost.

Description:

We are growing again with the addition of the 30cc "Strong Design" Edge 540 V3. This 30cc SD EDGE was designed from the ground up by aeronautical engineer Adam Strong. Tested, perfected and approved, to make sure this is going to be the best 30cc Edge out there, in flight and quality/features. It is carbon fiber rich, in the wings fuselage and the accessories.

The Edge 540 is known for its unsurpassed harrier and slow alpha flight capability and this 30cc version is no different, and specially designed by Adam Strong to take advantage of the scale planes tendencies, but added thought into what you want out of a modern day RC plane. Prepare to be amazed!

Enjoy smooth clean knife edge and similar maneuvers as well as very predictable smooth 3D. Very even rolling harriers, easy hover and torque rolls - this plane is a GREAT learning tool with the wonderful advantages of gasoline. 

This new 30cc Edge 540 comes with the same great features that Redwing provides with all of our planes. It is set up and ready for a DLE 30 or 35RA to be mounted right in - or try going electric with our new Tomcat Electric Motors with a little adaptation. A neat feature of the 30cc Edge is that is has a carbon fiber reinforcements in the fuselage and wings for added strength.

The 30cc Edge 540 is available in 3 new attractive schemes designed by Adam Strong. Get them while they are in stock. This is a great new plane so don't let this one slip by.

Product Manual

Check out this awesome plane in action!

Specifications:

• Wing span:
  • With tips:78.5
  • Without tips: 75"
• Wing area: 1145 sq. inches (wings and stabs measured ONLY) More surface area when considering fuselage
• All up flying weight: 10.5 to 12 lbs.
• Engine: DLE 30, DLE 35RA or similar, or Equivalent Electric System
• Recommended Spinner Size: 3"
• Recommended CG: 5" to 5.75" from the front half of wing tube
• Recommended Prop Size: 18x8 to 20x8
• Recommended Throws: adjust to liking as you fly LOW MED HIGH

  AIL 1.75”/30% 2.75”/40% 4”/60%

  ELE 2.5”/30% 3.25”/ 40% 4”/55%

  RUD 2.5”/20% 3”/ 30% 4.25”/40%

  
  
  
  
  

Features:

• Removable stab
• Ringed cowl
• Adjustable push rods
• Canister Tunnel built in
• Painted matching spinner (available separately)
• Optional integrated air deflector for venting hot cowl air
• Fast Fly Feature: Pre-installed hinges (except rudder)
• Carbon Fiber Retention Pins in stabs
• Fiberglass tabs on stabs (stronger than wood)
• Carbon Fiber Wing Tube
• Metal Servo arm set
• Removable Side Force Generators / Racing Wing tips

We DO ship our planes internationally!

Please contact us with your location for more specific cost.

Description:

We are growing again with the addition of the 30cc "Strong Design" Edge 540 V3. This 30cc SD EDGE was designed from the ground up by aeronautical engineer Adam Strong. Tested, perfected and approved, to make sure this is going to be the best 30cc Edge out there, in flight and quality/features. It is carbon fiber rich, in the wings fuselage and the accessories.

The Edge 540 is known for its unsurpassed harrier and slow alpha flight capability and this 30cc version is no different, and specially designed by Adam Strong to take advantage of the scale planes tendencies, but added thought into what you want out of a modern day RC plane. Prepare to be amazed!

Enjoy smooth clean knife edge and similar maneuvers as well as very predictable smooth 3D. Very even rolling harriers, easy hover and torque rolls - this plane is a GREAT learning tool with the wonderful advantages of gasoline. 

This new 30cc Edge 540 comes with the same great features that Redwing provides with all of our planes. It is set up and ready for a DLE 30 or 35RA to be mounted right in - or try going electric with our new Tomcat Electric Motors with a little adaptation. A neat feature of the 30cc Edge is that is has a carbon fiber reinforcements in the fuselage and wings for added strength.

The 30cc Edge 540 is available in 3 new attractive schemes designed by Adam Strong. Get them while they are in stock. This is a great new plane so don't let this one slip by.

Product Manual

Check out this awesome plane in action!

Specifications:

• Wing span:
  • With tips:78.5
  • Without tips: 75"
• Wing area: 1145 sq. inches (wings and stabs measured ONLY) More surface area when considering fuselage
• All up flying weight: 10.5 to 12 lbs.
• Engine: DLE 30, DLE 35RA or similar, or Equivalent Electric System
• Recommended Spinner Size: 3"
• Recommended CG: 5" to 5.75" from the front half of wing tube
• Recommended Prop Size: 18x8 to 20x8
• Recommended Throws: adjust to liking as you fly LOW MED HIGH

  AIL 1.75”/30% 2.75”/40% 4”/60%

  ELE 2.5”/30% 3.25”/ 40% 4”/55%

  RUD 2.5”/20% 3”/ 30% 4.25”/40%

  
  
  
  
  

Features:

• Removable stab
• Ringed cowl
• Canister Tunnel built in
• Painted matching spinner (available separately)
• Includes a black plastic spinner
• Optional integrated air deflector for venting hot cowl air
• Fast Fly Feature: Pre-installed hinges (except rudder)
• Carbon Fiber Retention Pins in stabs
• Fiberglass tabs on stabs (stronger than wood)
• Carbon Fiber Wing Tube
• Metal Servo arm set
• Removable Side Force Generators / Racing Wing tips

We DO ship our planes internationally!

Please contact us with your location for more specific cost.

30cc Extra Red

Description: The Slick 540 was designed with input from aerobatic expert, Glen Dell. This 30cc version of the Slick 540 was built with those expert modifications in mind. The 30cc Slick 540 has moved much of its weight near the center of gravity, helping to make high energy maneuvers cleaner and more comfortable. This 30cc Slick is suited for both 3D and pattern flight. Showing both very smooth lines, but also slowing down well for 3D flight. The Slick 540 does most of your typical maneuvers very well: clean knife edges, exceptionally smooth rolling harries, and does SNAP maneuvers SO cleanly due to its weight distribution. With the bold contrasting scheme of this 30cc Slick 540, you will have great visibility even from a distance. Hurry and get your 30cc Slick before we run out! Buy Replacement Parts: Click Here Product Manual: Coming Soon! Specifications: Wing Span: 74" Length: 67" Wing Area: Coming Soon Cowl Length: 10 1/4" Width: about 9" Engine: (30-36cc engine) Recommended: Da35, DLE 35, PTE36, Tomcat 30cc All up flying weight: 10 -12 lbs depending on build style Radio: 6 channel recommended (4ch possible) Recommended Spinner Size: 3" needed Recommended CG: Start ON wing tube Recommended Prop Size: 18x8/10, 20x10 for sport 18x619x6/8, 20x6/8 for 3d Firewall to spinner back plate: 6 5/16" Features: Ringed cowl Removable Stabs Painted matching spinner (available separately) Includes a black plastic spinner Carbon Fiber Reinforced Stringers Carbon Fiber Landing Gears and accessories Phenolic horns with carbon joiner Phenolic tabs on stabs Genuine Ultra Coat Metal Servo arm set Pre-Hinged Surfaces Removable Side Force Generators / Racing Wing tips High quality construction and hardware We DO ship our planes internationally! Please contact us with your location for more specific cost.

Description: The Slick 540 was designed with input from aerobatic expert, Glen Dell. This 30cc version of the Slick 540 was built with those expert modifications in mind. The 30cc Slick 540 has moved much of its weight near the center of gravity, helping to make high energy maneuvers cleaner and more comfortable. This 30cc Slick is suited for both 3D and pattern flight. Showing both very smooth lines, but also slowing down well for 3D flight. The Slick 540 does most of your typical maneuvers very well: clean knife edges, exceptionally smooth rolling harries, and does SNAP maneuvers SO cleanly due to its weight distribution. With the bold contrasting scheme of this 30cc Slick 540, you will have great visibility even from a distance. Hurry and get your 30cc Slick before we run out! Buy Replacement Parts: Click Here Product Manual: Coming Soon! Specifications: Wing Span: 74" Length: 67" Wing Area: Coming Soon Cowl Length: 10 1/4" Width: about 9" Engine: (30-36cc engine) Recommended: Da35, DLE 35, PTE36, Tomcat 30cc All up flying weight: 10 -12 lbs depending on build style Radio: 6 channel recommended (4ch possible) Recommended Spinner Size: 3" needed Recommended CG: Start ON wing tube Recommended Prop Size: 18x8/10, 20x10 for sport 18x619x6/8, 20x6/8 for 3d Firewall to spinner back plate: 6 5/16" Features: Ringed cowl Removable Stabs Painted matching spinner (available separately) Includes a black plastic spinner Carbon Fiber Reinforced Stringers Carbon Fiber Landing Gears and accessories Phenolic horns with carbon joiner Phenolic tabs on stabs Genuine Ultra Coat Metal Servo arm set Pre-Hinged Surfaces Removable Side Force Generators / Racing Wing tips High quality construction and hardware We DO ship our planes internationally! Please contact us with your location for more specific cost.

Description: The Slick 540 was designed with input from aerobatic expert, Glen Dell. This 30cc version of the Slick 540 was built with those expert modifications in mind. The 30cc Slick 540 has moved much of its weight near the center of gravity, helping to make high energy maneuvers cleaner and more comfortable. This 30cc Slick is suited for both 3D and pattern flight. Showing both very smooth lines, but also slowing down well for 3D flight. The Slick 540 does most of your typical maneuvers very well: clean knife edges, exceptionally smooth rolling harries, and does SNAP maneuvers SO cleanly due to its weight distribution. With the bold contrasting scheme of this 30cc Slick 540, you will have great visibility even from a distance. Hurry and get your 30cc Slick before we run out! Buy Replacement Parts: Click Here Product Manual: Coming Soon! Specifications: Wing Span: 74" Length: 67" Wing Area: Coming Soon Cowl Length: 10 1/4" Width: about 9" Engine: (30-36cc engine) Recommended: Da35, DLE 35, PTE36, Tomcat 30cc All up flying weight: 10 -12 lbs depending on build style Radio: 6 channel recommended (4ch possible) Recommended Spinner Size: 3" needed Recommended CG: Start ON wing tube Recommended Prop Size: 18x8/10, 20x10 for sport 18x619x6/8, 20x6/8 for 3d Firewall to spinner back plate: 6 5/16" Features: Ringed cowl Removable Stabs Painted matching spinner (available separately) Includes a black plastic spinner Carbon Fiber Reinforced Stringers Carbon Fiber Landing Gears and accessories Phenolic horns with carbon joiner Phenolic tabs on stabs Genuine Ultra Coat Metal Servo arm set Pre-Hinged Surfaces Removable Side Force Generators / Racing Wing tips High quality construction and hardware We DO ship our planes internationally! Please contact us with your location for more specific cost.

60" Laser 260 (70e) AeroplusRC