General Accessories

Description: DID YOU GET COOL ALUMINUM OR CARBON FIBER ARMS WITH YOUR KIT, BUT DON'T WANT TO USE THE PLASTIC CIRCLE ARMS THAT COME WITH YOUR SERVOS? FINALLY! THE SOLUTION IS HERE!!

Now made to fit Hitec, OR XQpower/Futaba/PowerHD

Made to line up with Redwing, Goldwing, and MOST other ARFS that include servo arms. The holes pre drilled are threaded for a 2mm bolt, so that you do NOT have to use a nut on the bottom. Just a little loc tite on the servo arm threads, and tighten. YOUR DONE!

Not sure if it's the best thing since sliced bread, but it's close!

1 circle $4.99
5 = $19.95
10= $38.90
 

Description:

MPI servo arms are made with heavy duty anodized aluminum offset servo arms designed for Hitec, Futaba, XQ Power, Power HD Servos. These MPI servo arms are drilled and tapped for 4-40 with a starter hole for another hole closer in if necessary. The clamping arm on these MPI arms ensures a safe and secure installation, minimizing any risk of slop or the arms coming loose. 

We recommend the following sizes of MPI arms for the planes below:

30cc planes typically use 1.25" for ailerons and elevators, and 3" for rudder.

50cc planes typically use 1.25-1.5" for ailerons and elevators, and 3.5" - 4" for rudder.

100cc planes typically use 1.5" for ailerons and elevators, and 4" for rudder.

1.25", 1.5", 3", 4" Sizes
Available for HiTEC, XQ Power, PowerHD, Futaba Servos

MPI Arms feature:
Bracing for Extra Strength
Lightweight and Strong
Extra Security Screw to Keep Arms on
Pre Dented to Allow for Optional Holes


Futuba style arms fit: Power HD, XQ-Power, and Futaba
Hitec fit: Hitec


**Now introducing new size! 2-inch lengths for HiTec and Futaba!

MPI Servo Arm Pricing:

• 1.25" arm $8.90
• 1.5" arm $10.25
• 2" arm $11
• 3" rudder arm $15.25
• 4" rudder arm $16.95
  

 

Description:
Our wingbags are made with the finest materials to protect your precious investment. There are 2 openings, one slot for each wing, a wing tube slot, that velcros shut, and comfortable carrying straps. They zip closed to prevent your wings from falling out when carrying. They are made of highly durable nylon, that is weather resistant. They have thick foam padding protecting the wings from the outside, as well as each other. Other bags that come close to this quality are $80-$90. But we want you to protect and show off our beautiful planes! So we offer these at bargain prices! Get them while you can. They always go fast when in stock.

Now EVERYONE can use and enjoy our amazing wing bags! Introducing 2 more sizes! Don't get caught without one for MOST sizes of plane!
 

Specifications:

• High Quality Double Wing Bag Extra Duty Padding
• Slot for wing tube
• Heavy Duty Nylong Material
• Quality Construction
• Heavy Duty Zippers
• Awesome Price!

 

Approximate Dimensions:

Small

 

• 24” at top
• 41” long
• 10” at bottom
  
  Medium
• 28” W at top
• 47” long
• 13” W at bottom
  Large
• 32” at top
• 54” long
• 16” at bottom
  
  PLEASE confirm size needed before ordering!
  
  
  
  
  No more thinking to yourself - "those wing bags are cool but my wings won't fit" - because they WILL! We want everyone to have the same opportunity to protect their wings with style - and who are we to discriminate?!
  
  
  
   

Description:
This Drill Jig is a high quality heavy steel jig that can be used to perfectly drill your props and spinners for the DLE 30cc, DLE 35RA, DLE55, DLE55RA, DA, DL, DLA, 50cc, MLD 28cc, and EVO 54cc

Simply slide the prop or spinner onto the guide and tighten down the bolt to secure it and drill out the holes using the included drill bits!

Carbon Fiber Tail Wheel SIMPLE SERIES for 30cc, 50cc and 100cc

Description:
This tailwheel offers the best options of price, ease of use, reliability, weight and ease of installation.



Specifications:

• 1.1 oz. Total Weight
• Carbon Fiber
• 6 " from wheel to end of carbon mount(50cc)
• 4.5" from wheel to carbon fiber mount (30cc)
• 1.5" high quality rubber wheel

 

 

 

 

Features:

• Carbon Fiber Frame
• 1.5" Rubberized Wheel
• Aluminum Collars for lightweight
• Aluminum swivel for durability and precision

 

 

Carbon fiber tail wheel pricing
30cc: $16.99
50cc: 20.99

 

 

Description:
Make SURE your control surfaces are moving in even amounts in ALL directions.

Quality you can count on
This high quality CNC anodized throw meter, is made to precisely measure your surface deflections. Just clip on the aileron or elevtor (with it's padded light grab clip) and then turn the dial to show zero. Move your surface up or down and record your degree of throw. Match it with your other side, AND the other direction easily, quickly and PRECISELY!

Description:
This Miracle RC Fuel pump is a MUST have accessory. Saves you time and elbow grease when filling up your tank. The case is CNC process 6061, and it has a hardened pump barrel. It has a magnet on the outside, so you it can stick right onto metal containers!

The gears are fuel proof nylon, and fiberglass filled
The gear shaft is stainless steel
Japaneese oil seals
The end-seal O-ring is made of butadience-acrylonitrile rubber - so it can be used with nitro, gas, or even kerosene
volatage: 7.2 to 12V
Flow rate: 1000ml/min at 11.1V
Includes a filtered nozzle and clunk

DO NOT DRY RUN

Description:
With this clever device you can quickly and easily get access to your batteries and receivers, without having to unscrew anything! You can opt to do a single latch in the top (as shown) or 2 on the sides.

Easy to install. Mount the spring with epoxy, put some paint on the tip of the metal latch, and let it spring forward (while wet with paint) to hit the canopy to mark your hole. Drill out carefully and your ready to go!

Description:
This little hard to find part is great to have on hand. These bolts fit most needs - the nylon canopy bolts are especially useful, since you won't need to have any tools on hand to quickly access your hatch!

The 3mmx16mm nylon canopy bolts are made to fit most ALL canopies out there.

The 6mmx25mm nylong wing bolts are perfect for most imported planes (most are going to be this thread size)

The 1/4-20 nylong wing bolt is for American Standard sizes, and 1/4-20 is the most common size used on wings for rc planes.

Prices

• 3mmx16mm 1 pair - $1.99
• 3mmx16mm 3 pair - $4.99
• 3mmx16mm 5 pair - $7.99

• 6mmx25mm 1 pair - $2.49
• 6mmx25mm 3 pair - $5.99

• 1/4-20x1" 1 pair - $2.49
• 1/4-20x1" 3 pair - $5.99

Description:
Socket Head 5mm x 70/80/90/100/120/140mm
6 sizes for most spinners
 

Description:
One Size Fits All
Velcro Adjustable Strap, all cloth hat

 

The NEW Fortitude V2 gas tanks are here!!!

 

*Fourtitude has amended their fuel tanks due to federal regulations on shipping fuel containers. Check out the video below to see just how easy it is to assemble the tank!

Make sure to upgrade asap as this new and improved design is the cutting edge of next generation RC gas tanks. You are probably familiar with the old design- with the the line-in and the vent nozzle on the top of the tank and the line running to the engine on the cap. Because there are so many different fitting and sealants, there are alot of places where something can go wrong or start leaking.

The V2 design eliminates ALL of these problems with ONE SIMPLE DESIGN..... ALL nozzles are in the removable cap which has TWO rubber gaskets and is ONE SOLID PIECE, which includes the vent tube and filling tube. Fewer parts = Fewer problems.

Fortitude has hit the target with the V2 Tank and as always, is the best quality you can get!

Fortitude (or 4titude) gas tanks are high quality, crystal clear plastic tanks, that take the guesswork and worry out of your tanks. You can clearly see into the 4titude tank to know if your line is still flexible and your clunk is in place! Fortitude tanks include the foam, the Velcro and the tubing to hook to your engine!

4titude tanks are SUPER light, in fact, the lightest commercially available tanks on the market. They use aerospace grade adhesives to ensure long life. 4titude tanks are also made of seamless plastic, making them fully resistant to splitting!

The included clunk is filtered as well.

Video:

Video:

 

V2 Features:

• Injection Molded Single piece glass filled nylon fitting manifold. Light weight extremely strong material that creates a very easy to plumb and compact fuel tank.


• Dual static O-ring seals, designed utilizing the latest aerospace engineering technology, to seal fluid even under high pressure.  V2 has one potential leak point and with the redundant static seals we have double assurance it will never leak.


• Plumbed with a filtered clunk and an extended fill/ drain tube to make it easy to drain the tank completely.


• Zero protrusions/ fittings on the outside of the tank to interfere with tight airframe installations.


• We took care of making sure there is zero guess work involving installation. 3D diagram included with each tank showing how to properly plumb your fuel system for the best results.

 

 

Note the length dimension is from the back of the tank to the front of the fitting/tubing barbs.

Specs:

• Size: 12oz (354 ml)
  • Length 6 3/4" ” x Width 2 3/16"” x Height 2 3/16” (171.5 x 55.5 x 55.5 mm)
• Weight: 1.4 oz
• Fittings are part of the cap/ internal tubing
• Filtered clunk
• Super light!
• Crystal clear
• Seamless
• Includes: Tank/foam/velcro
• Fourtitude Tanks are compatible with gas engines only. (Not compatible with Glow fuel)

 

 

 

Fortitude tanks are compatible with ALL oils, synthetic and non-synthetic. Fortitude uses PPG Class B sealant. The expert below explains how high tech and quality of a sealant it is:

“PPG Class B is an aircraft integral fuel tank sealant. It has a service temperature range from - 65°F (-54°C) to 250°F (121°C), with intermittent excursions up to 275°F (135°C). This material is designed for fillet sealing of fuel tanks and other air- craft fuselage sealing applications. The cured sealant maintains excellent elastomeric properties after pro- longed exposure to both jet fuel and aviation gas. "