Servos

Contact UsCustomer Reviews

Servos

Servos

To see all servos carried by Redwing RC select Accessories/Radios-Servos-Parts.

Products

NEW

Power HD B2S Brushless Servo - 50kg/cm (694.4 oz/in), 0.10sec 8.4V - (Mega Torque and SR/SXR/SSR/SUR/SFR Compatible)

Power HD B2S Brushless Servo - 50kg/cm (694.4 oz/in), 0.10sec - HV Mega Torque

Check out the new Power HD 0804HV Brushless servos!

These are great to use a throttle servo and can be used in systems with other high voltage servos!

The Power HD 0804HV high voltage servos are made with brushless technology. Now - we've heard about this "brushless" stuff before but it is time to ask the question on all of our minds - why is that so great? Take a brushless motor for example - no brushes in a brushless motor (no kidding...) nor does it have the commutator - instead a small circuit board coordinates the energy delivery to the windings. Think about this technology being used in a power tool - since the electronics communicate directly with the stationary windings the tool can adapt to its surroundings - only using enough juice necessary to accomplish the job. So if you are using a brushless drill to drive a screw into Styrofoam - it will sense the lack of resistance from the foam and pulls only enough charge from the battery that it needs. Whereas a brushed drill will run as fast and hard as it can no matter the job simultaneously wasting your battery life.

"What the heck does that have to do with my servo?" Well now they are incorporating that smart technology into these HD 0804HV high voltage servos - so they are not going to be sucking the life of your Redwing LiFe battery when it doesn't have to - which means not only would you be getting a great and powerful servo - it's smart! Your "LiFe" will thank you.

These servos are high efficiency and perform better. They run cooler and quieter and with less vibration - because there are no brush arcings, the radio frequency interference and electronic noise is significantly reduced.

All aluminum housing, high voltage and the new brushless technology gives you the best strength and speed while being incredibly efficient and long lasting.

So now the only question is - why are you still reading this? Go buy your Power HD 0804HV servos before they're gone!

 

Specs:

  • Torque:
    • 105.54 oz/in at 6V (7.6 kg/cm)
    • 125.00 oz/in at 7.4V (9.0 kg/cm)
       
  • Speed:
    • .055 sec at 6V
    • .042 sec at 7.4V
       
  • Voltage: 6.0 ~ 7.4 DC Volts
  • Weight: 1.58 oz (45g)
  • Size: 1.59 x 0.80 x 1.03 in (40.3 x 20.2 x 26.1 mm)
     
  • Operating Temp- -20℃~60℃
  • Working Frequency - 1520μs / 500hz
  • Brushless Motor
  • Ball Bearing x 2
  • Titanium & Steel Gears

HD-B2S

$75.99

Out of stock

NEW

Power HD B3S Brushless Servo - 40kg/cm (555.5 oz/in), 0.08sec 8.4V - (High Speed and SR/SXR/SSR/SUR/SFR Compatible)

Power HD B3S Brushless Servo - 40kg/cm (555.5 oz/in), 0.08sec 8.4V - (High Speed and SR/SXR/SSR/SUR/SFR Compatible)

Check out the new Power HD 0804HV Brushless servos!

These are great to use a throttle servo and can be used in systems with other high voltage servos!

The Power HD 0804HV high voltage servos are made with brushless technology. Now - we've heard about this "brushless" stuff before but it is time to ask the question on all of our minds - why is that so great? Take a brushless motor for example - no brushes in a brushless motor (no kidding...) nor does it have the commutator - instead a small circuit board coordinates the energy delivery to the windings. Think about this technology being used in a power tool - since the electronics communicate directly with the stationary windings the tool can adapt to its surroundings - only using enough juice necessary to accomplish the job. So if you are using a brushless drill to drive a screw into Styrofoam - it will sense the lack of resistance from the foam and pulls only enough charge from the battery that it needs. Whereas a brushed drill will run as fast and hard as it can no matter the job simultaneously wasting your battery life.

"What the heck does that have to do with my servo?" Well now they are incorporating that smart technology into these HD 0804HV high voltage servos - so they are not going to be sucking the life of your Redwing LiFe battery when it doesn't have to - which means not only would you be getting a great and powerful servo - it's smart! Your "LiFe" will thank you.

These servos are high efficiency and perform better. They run cooler and quieter and with less vibration - because there are no brush arcings, the radio frequency interference and electronic noise is significantly reduced.

All aluminum housing, high voltage and the new brushless technology gives you the best strength and speed while being incredibly efficient and long lasting.

So now the only question is - why are you still reading this? Go buy your Power HD 0804HV servos before they're gone!

 

Specs:

  • Torque:
    • 105.54 oz/in at 6V (7.6 kg/cm)
    • 125.00 oz/in at 7.4V (9.0 kg/cm)
       
  • Speed:
    • .055 sec at 6V
    • .042 sec at 7.4V
       
  • Voltage: 6.0 ~ 7.4 DC Volts
  • Weight: 1.58 oz (45g)
  • Size: 1.59 x 0.80 x 1.03 in (40.3 x 20.2 x 26.1 mm)
     
  • Operating Temp- -20℃~60℃
  • Working Frequency - 1520μs / 500hz
  • Brushless Motor
  • Ball Bearing x 2
  • Titanium & Steel Gears

HD-B3S

$75.99

NEW

Power HD B4S Brushless Servo - 32kg/cm (444.4 oz/in), 0.065sec 8.4V - (Super High Speed and SR/SXR/SSR/SUR/SFR Compatible)

Power HD B4S Brushless Servo - 32kg/cm (444.4 oz/in), 0.065sec 8.4V - (Super High Speed and SR/SXR/SSR/SUR/SFR Compatible)

Check out the new Power HD 0804HV Brushless servos!

These are great to use a throttle servo and can be used in systems with other high voltage servos!

The Power HD 0804HV high voltage servos are made with brushless technology. Now - we've heard about this "brushless" stuff before but it is time to ask the question on all of our minds - why is that so great? Take a brushless motor for example - no brushes in a brushless motor (no kidding...) nor does it have the commutator - instead a small circuit board coordinates the energy delivery to the windings. Think about this technology being used in a power tool - since the electronics communicate directly with the stationary windings the tool can adapt to its surroundings - only using enough juice necessary to accomplish the job. So if you are using a brushless drill to drive a screw into Styrofoam - it will sense the lack of resistance from the foam and pulls only enough charge from the battery that it needs. Whereas a brushed drill will run as fast and hard as it can no matter the job simultaneously wasting your battery life.

"What the heck does that have to do with my servo?" Well now they are incorporating that smart technology into these HD 0804HV high voltage servos - so they are not going to be sucking the life of your Redwing LiFe battery when it doesn't have to - which means not only would you be getting a great and powerful servo - it's smart! Your "LiFe" will thank you.

These servos are high efficiency and perform better. They run cooler and quieter and with less vibration - because there are no brush arcings, the radio frequency interference and electronic noise is significantly reduced.

All aluminum housing, high voltage and the new brushless technology gives you the best strength and speed while being incredibly efficient and long lasting.

So now the only question is - why are you still reading this? Go buy your Power HD 0804HV servos before they're gone!

 

Specs:

  • Torque:
    • 105.54 oz/in at 6V (7.6 kg/cm)
    • 125.00 oz/in at 7.4V (9.0 kg/cm)
       
  • Speed:
    • .055 sec at 6V
    • .042 sec at 7.4V
       
  • Voltage: 6.0 ~ 7.4 DC Volts
  • Weight: 1.58 oz (45g)
  • Size: 1.59 x 0.80 x 1.03 in (40.3 x 20.2 x 26.1 mm)
     
  • Operating Temp- -20℃~60℃
  • Working Frequency - 1520μs / 500hz
  • Brushless Motor
  • Ball Bearing x 2
  • Titanium & Steel Gears

HD-B4S

$75.99

NEW

Power HD B5S Brushless Servo - 20kg/cm (277.7 oz/in), 0.05 sec 8.4V - (Ultra High Speed and SR/SXR/SSR/SUR/SFR Compatible)

Power HD B5S Brushless Servo - 20kg/cm (277.7 oz/in), 0.05 sec 8.4V - (Ultra High Speed and SR/SXR/SSR/SUR/SFR Compatible)

Check out the new Power HD 0804HV Brushless servos!

These are great to use a throttle servo and can be used in systems with other high voltage servos!

The Power HD 0804HV high voltage servos are made with brushless technology. Now - we've heard about this "brushless" stuff before but it is time to ask the question on all of our minds - why is that so great? Take a brushless motor for example - no brushes in a brushless motor (no kidding...) nor does it have the commutator - instead a small circuit board coordinates the energy delivery to the windings. Think about this technology being used in a power tool - since the electronics communicate directly with the stationary windings the tool can adapt to its surroundings - only using enough juice necessary to accomplish the job. So if you are using a brushless drill to drive a screw into Styrofoam - it will sense the lack of resistance from the foam and pulls only enough charge from the battery that it needs. Whereas a brushed drill will run as fast and hard as it can no matter the job simultaneously wasting your battery life.

"What the heck does that have to do with my servo?" Well now they are incorporating that smart technology into these HD 0804HV high voltage servos - so they are not going to be sucking the life of your Redwing LiFe battery when it doesn't have to - which means not only would you be getting a great and powerful servo - it's smart! Your "LiFe" will thank you.

These servos are high efficiency and perform better. They run cooler and quieter and with less vibration - because there are no brush arcings, the radio frequency interference and electronic noise is significantly reduced.

All aluminum housing, high voltage and the new brushless technology gives you the best strength and speed while being incredibly efficient and long lasting.

So now the only question is - why are you still reading this? Go buy your Power HD 0804HV servos before they're gone!

 

Specs:

  • Torque:
    • 105.54 oz/in at 6V (7.6 kg/cm)
    • 125.00 oz/in at 7.4V (9.0 kg/cm)
       
  • Speed:
    • .055 sec at 6V
    • .042 sec at 7.4V
       
  • Voltage: 6.0 ~ 7.4 DC Volts
  • Weight: 1.58 oz (45g)
  • Size: 1.59 x 0.80 x 1.03 in (40.3 x 20.2 x 26.1 mm)
     
  • Operating Temp- -20℃~60℃
  • Working Frequency - 1520μs / 500hz
  • Brushless Motor
  • Ball Bearing x 2
  • Titanium & Steel Gears

HD-B5S

$75.99

NEW

Power HD B7RS Brushless Servo - 13.0 kg/cm (180.5 oz/in), 0.05 sec 8.4V - (Programmable Low Profile and Ultra High Speed)

Power HD B7RS Brushless Servo - 13.0 kg/cm (180.5 oz/in), 0.05 sec 8.4V - (Low Profile and Ultra High Speed)

Check out the new Power HD 0804HV Brushless servos!

These are great to use a throttle servo and can be used in systems with other high voltage servos!

The Power HD 0804HV high voltage servos are made with brushless technology. Now - we've heard about this "brushless" stuff before but it is time to ask the question on all of our minds - why is that so great? Take a brushless motor for example - no brushes in a brushless motor (no kidding...) nor does it have the commutator - instead a small circuit board coordinates the energy delivery to the windings. Think about this technology being used in a power tool - since the electronics communicate directly with the stationary windings the tool can adapt to its surroundings - only using enough juice necessary to accomplish the job. So if you are using a brushless drill to drive a screw into Styrofoam - it will sense the lack of resistance from the foam and pulls only enough charge from the battery that it needs. Whereas a brushed drill will run as fast and hard as it can no matter the job simultaneously wasting your battery life.

"What the heck does that have to do with my servo?" Well now they are incorporating that smart technology into these HD 0804HV high voltage servos - so they are not going to be sucking the life of your Redwing LiFe battery when it doesn't have to - which means not only would you be getting a great and powerful servo - it's smart! Your "LiFe" will thank you.

These servos are high efficiency and perform better. They run cooler and quieter and with less vibration - because there are no brush arcings, the radio frequency interference and electronic noise is significantly reduced.

All aluminum housing, high voltage and the new brushless technology gives you the best strength and speed while being incredibly efficient and long lasting.

So now the only question is - why are you still reading this? Go buy your Power HD 0804HV servos before they're gone!

 

Specs:

  • Torque:
    • 105.54 oz/in at 6V (7.6 kg/cm)
    • 125.00 oz/in at 7.4V (9.0 kg/cm)
       
  • Speed:
    • .055 sec at 6V
    • .042 sec at 7.4V
       
  • Voltage: 6.0 ~ 7.4 DC Volts
  • Weight: 1.58 oz (45g)
  • Size: 1.59 x 0.80 x 1.03 in (40.3 x 20.2 x 26.1 mm)
     
  • Operating Temp- -20℃~60℃
  • Working Frequency - 1520μs / 500hz
  • Brushless Motor
  • Ball Bearing x 2
  • Titanium & Steel Gears

HD-B7RS

$85.99

NEW

HiTec D145SW 32 Bit, Wide Voltage, Steel Servo .14/83oz @ 7.4V (Slim Wing Servo)

HiTec D145SW 32 Bit, Wide Voltage, Steel Servo .14/83oz @ 7.4V (Slim Wing Servo)

With ultra-efficient Neu brushless motors, titanium gear trains, low current consumption and constant output power, the HSB-93XX series of servos is the perfect match for the most discriminating pilots and racers. The HSB-9360’s speed is ideal for pilots with the need for speed!

Features:

  • Power Efficient Brushless Motor Controller
    Energy efficiency is a common interest for all modelers. Our HSB-9XXX Series uses the latest control circuit technology including a regenerative braking circuit which puts power back into the battery as the motor slows. This feature, combined with ultralow current draw under sustained loads, allows our brushless servos to consume 1/5 the power of most other brushless servos on the market today.
  • Custom NeuMotor
    Designed by Steve Neu exclusively for our HSB-9XXX Series, these high performance, brushless motors provide longstanding durability and performance.
  • Constant Torque Output:
    Thanks to our revolutionary circuit and motor designs, the HSB-9XXX Series maintain their speed in a more consistent manner, regardless of load.
  • Hybrid MPD 1st Gear:
    Our unique ultra-durable Metal/Plastic/duralumin hybrid first gear prevents inadvertent electrical noise from affecting other components within your aircraft or vehicle.
  • Industry-Leading Titanium Gear Train
    Hitec was the first manufacturer to utilize low wear Titanium gears in our servos and continues to be the leader in Titanium gear technology.
  • 25-Tooth Standard Spline
    Our Brushless servos utilize a standard 25 tooth output spline for maximum compatibility with the large variety of aftermarket horn available on the market these days.
     

    Specifications:

    • Torque:
      • 236 oz/in at 6V (17.0 kg-cm)
      • 236 oz/in at 7.4V (17.0 kg-cm)
         
    • Speed:
      • .08 sec at 6V
      • .06 sec at 7.4V
         
    • Voltage: 6V - 7.4V
    • Weight: 2.40oz (68g)
    • Size: 40 x 20 x 68 mm (1.57 x 0.79 x 1.50in)

HRC36145S

$65.99

NEW

Heavy Duty 25T 1.75" or 2.0" Aluminum CNC Servo Arm (Futaba, Savox, Power HD) (CLONE)

Heavy Duty 25T 1.75" or 2.0" Aluminum CNC Servo Arm (Futaba, Savox, Power HD)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Description:

Thought our other servos were great? Well of course they are! But wait until you check out these new Power HD servos - they will rock your wheel pants off* (no wheel pants will be harmed by using this product - but you get the idea).

There's a storm brewing in Redwing RC! These new HD Storms can handle anything thrown at them. Now, we can't imagine your servos heading into battle facing a hurricane or tornado - but they sure behave as if they have fought and conquered the fiercest of storms - taking all of that power and knowledge with them when they are installed into your bird. Rain or shine, these servos are ready for anything!

The HD Storm 3s are high efficiency and perform better. They run cooler and quieter and with less vibration - because there are no brush arcings, the radio frequency interference and electronic noise is significantly reduced.

All aluminum housing, high voltage and the new brushless technology gives you the best strength and speed while being incredibly efficient and long lasting.

New and Improved Technology!

The Power HD Storm 3 high voltage servos are made with brushless technology. Now - we've heard about this "brushless" stuff before but it is time to ask the question on all of our minds - why is that so great? Take a brushless motor for example - no brushes in a brushless motor (no kidding...) nor does it have the commutator - instead a small circuit board coordinates the energy delivery to the windings. Think about this technology being used in a power tool - since the electronics communicate directly with the stationary windings the tool can adapt to its surroundings - only using enough juice necessary to accomplish the job. So if you are using a brushless drill to drive a screw into Styrofoam - it will sense the lack of resistance from the foam and pulls only enough charge from the battery that it needs. Whereas a brushed drill will run as fast and hard as it can no matter the job simultaneously wasting your battery life.

"What the heck does that have to do with my servo?" Well now they are incorporating that smart technology into these HD Storm 3 high voltage servos - so they are not going to be sucking the life of your Redwing LiFe battery when it doesn't have to - which means not only would you be getting a great and powerful servo - it's smart! Your "LiFe" will thank you.

So now the only question is - why are you still reading this? Go buy your Power HD Storm 3 servos before they're gone!

 

Specs:

  • Torque:
    • 374.9 oz/in at 6V (27.0 kg/cm)
    • 444.4 oz/in at 7.4V (32.0 kg/cm)
       
  • Speed:
    • .14 sec at 6VV
    • .11 sec at 7.4V
       
  • Voltage: 6.0 ~ 8.4 V
  • Weight: 2.82 oz (80g)
  • Size: 1.57 x 0.79 x 1.53 in (40.0 x 20.0 x 38.0mm)
     
  • Operating Temp- -20~60centigrade
  • Working Frequency - 1520μs / 333hz
  • BRUSHLESS Motor
  • Double Ball Bearings
  • Titanium and Steel gears
  • Water resistant O-Rings

 

servo-arm31

$7.99

NEW

Racers Edge Heavy Duty Large 4-in-1 Clamping Servo Arm 23T (JR, Spektrum, Sanwa)

Heavy Duty Large 4-in-1 Clamping Servo Arm 1.25" Aluminum CNC 23T (JR, Spektrum, Sanwa)

25T spine for Blue Bird, Savox, Futaba and power HD servos

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Description:

Thought our other servos were great? Well of course they are! But wait until you check out these new Power HD servos - they will rock your wheel pants off* (no wheel pants will be harmed by using this product - but you get the idea).

There's a storm brewing in Redwing RC! These new HD Storms can handle anything thrown at them. Now, we can't imagine your servos heading into battle facing a hurricane or tornado - but they sure behave as if they have fought and conquered the fiercest of storms - taking all of that power and knowledge with them when they are installed into your bird. Rain or shine, these servos are ready for anything!

The HD Storm 3s are high efficiency and perform better. They run cooler and quieter and with less vibration - because there are no brush arcings, the radio frequency interference and electronic noise is significantly reduced.

All aluminum housing, high voltage and the new brushless technology gives you the best strength and speed while being incredibly efficient and long lasting.

New and Improved Technology!

The Power HD Storm 3 high voltage servos are made with brushless technology. Now - we've heard about this "brushless" stuff before but it is time to ask the question on all of our minds - why is that so great? Take a brushless motor for example - no brushes in a brushless motor (no kidding...) nor does it have the commutator - instead a small circuit board coordinates the energy delivery to the windings. Think about this technology being used in a power tool - since the electronics communicate directly with the stationary windings the tool can adapt to its surroundings - only using enough juice necessary to accomplish the job. So if you are using a brushless drill to drive a screw into Styrofoam - it will sense the lack of resistance from the foam and pulls only enough charge from the battery that it needs. Whereas a brushed drill will run as fast and hard as it can no matter the job simultaneously wasting your battery life.

"What the heck does that have to do with my servo?" Well now they are incorporating that smart technology into these HD Storm 3 high voltage servos - so they are not going to be sucking the life of your Redwing LiFe battery when it doesn't have to - which means not only would you be getting a great and powerful servo - it's smart! Your "LiFe" will thank you.

So now the only question is - why are you still reading this? Go buy your Power HD Storm 3 servos before they're gone!

 

Specs:

  • Torque:
    • 374.9 oz/in at 6V (27.0 kg/cm)
    • 444.4 oz/in at 7.4V (32.0 kg/cm)
       
  • Speed:
    • .14 sec at 6VV
    • .11 sec at 7.4V
       
  • Voltage: 6.0 ~ 8.4 V
  • Weight: 2.82 oz (80g)
  • Size: 1.57 x 0.79 x 1.53 in (40.0 x 20.0 x 38.0mm)
     
  • Operating Temp- -20~60centigrade
  • Working Frequency - 1520μs / 333hz
  • BRUSHLESS Motor
  • Double Ball Bearings
  • Titanium and Steel gears
  • Water resistant O-Rings

 

servo-arm-RCE10220S

$10.99

NEW

Racers Edge Heavy Duty Large 4-in-1 Clamping Servo Arm 15T (Savox Large Scale Servos only)

Heavy Duty Large 4-in-1 Clamping Servo Arm 15T (Savox Large Scale Servos only) 

25T spine for Blue Bird, Savox, Futaba and power HD servos

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Description:

Thought our other servos were great? Well of course they are! But wait until you check out these new Power HD servos - they will rock your wheel pants off* (no wheel pants will be harmed by using this product - but you get the idea).

There's a storm brewing in Redwing RC! These new HD Storms can handle anything thrown at them. Now, we can't imagine your servos heading into battle facing a hurricane or tornado - but they sure behave as if they have fought and conquered the fiercest of storms - taking all of that power and knowledge with them when they are installed into your bird. Rain or shine, these servos are ready for anything!

The HD Storm 3s are high efficiency and perform better. They run cooler and quieter and with less vibration - because there are no brush arcings, the radio frequency interference and electronic noise is significantly reduced.

All aluminum housing, high voltage and the new brushless technology gives you the best strength and speed while being incredibly efficient and long lasting.

New and Improved Technology!

The Power HD Storm 3 high voltage servos are made with brushless technology. Now - we've heard about this "brushless" stuff before but it is time to ask the question on all of our minds - why is that so great? Take a brushless motor for example - no brushes in a brushless motor (no kidding...) nor does it have the commutator - instead a small circuit board coordinates the energy delivery to the windings. Think about this technology being used in a power tool - since the electronics communicate directly with the stationary windings the tool can adapt to its surroundings - only using enough juice necessary to accomplish the job. So if you are using a brushless drill to drive a screw into Styrofoam - it will sense the lack of resistance from the foam and pulls only enough charge from the battery that it needs. Whereas a brushed drill will run as fast and hard as it can no matter the job simultaneously wasting your battery life.

"What the heck does that have to do with my servo?" Well now they are incorporating that smart technology into these HD Storm 3 high voltage servos - so they are not going to be sucking the life of your Redwing LiFe battery when it doesn't have to - which means not only would you be getting a great and powerful servo - it's smart! Your "LiFe" will thank you.

So now the only question is - why are you still reading this? Go buy your Power HD Storm 3 servos before they're gone!

 

Specs:

  • Torque:
    • 374.9 oz/in at 6V (27.0 kg/cm)
    • 444.4 oz/in at 7.4V (32.0 kg/cm)
       
  • Speed:
    • .14 sec at 6VV
    • .11 sec at 7.4V
       
  • Voltage: 6.0 ~ 8.4 V
  • Weight: 2.82 oz (80g)
  • Size: 1.57 x 0.79 x 1.53 in (40.0 x 20.0 x 38.0mm)
     
  • Operating Temp- -20~60centigrade
  • Working Frequency - 1520μs / 333hz
  • BRUSHLESS Motor
  • Double Ball Bearings
  • Titanium and Steel gears
  • Water resistant O-Rings

 

servo-arm-RCE10220SAV

$10.99

NEW

HiTec DB-950SW Wide Voltage High Torque Steel Gear Servo .14sec/555oz @ 7.4v

HiTec DB-950SW Wide Voltage High Torque Steel Gear Servo .14sec/555oz @ 7.4v

With ultra-efficient Neu brushless motors, titanium gear trains, low current consumption and constant output power, the HSB-93XX series of servos is the perfect match for the most discriminating pilots and racers. The HSB-9360’s speed is ideal for pilots with the need for speed!

Features:

  • Power Efficient Brushless Motor Controller
    Energy efficiency is a common interest for all modelers. Our HSB-9XXX Series uses the latest control circuit technology including a regenerative braking circuit which puts power back into the battery as the motor slows. This feature, combined with ultralow current draw under sustained loads, allows our brushless servos to consume 1/5 the power of most other brushless servos on the market today.
  • Custom NeuMotor
    Designed by Steve Neu exclusively for our HSB-9XXX Series, these high performance, brushless motors provide longstanding durability and performance.
  • Constant Torque Output:
    Thanks to our revolutionary circuit and motor designs, the HSB-9XXX Series maintain their speed in a more consistent manner, regardless of load.
  • Hybrid MPD 1st Gear:
    Our unique ultra-durable Metal/Plastic/duralumin hybrid first gear prevents inadvertent electrical noise from affecting other components within your aircraft or vehicle.
  • Industry-Leading Titanium Gear Train
    Hitec was the first manufacturer to utilize low wear Titanium gears in our servos and continues to be the leader in Titanium gear technology.
  • 25-Tooth Standard Spline
    Our Brushless servos utilize a standard 25 tooth output spline for maximum compatibility with the large variety of aftermarket horn available on the market these days.
     

    Specifications:

    • Torque:
      • 236 oz/in at 6V (17.0 kg-cm)
      • 236 oz/in at 7.4V (17.0 kg-cm)
         
    • Speed:
      • .08 sec at 6V
      • .06 sec at 7.4V
         
    • Voltage: 6V - 7.4V
    • Weight: 2.40oz (68g)
    • Size: 40 x 20 x 68 mm (1.57 x 0.79 x 1.50in)

HRCDB950SW

$139.99

NEW

HiTec D-950TW 32-Bit, Ultra Torque, Titanium Gear Servo (35kg/486oz [email protected])

HiTec D-950TW 32-Bit, Ultra Torque, Titanium Gear Servo (35kg/486oz [email protected]

With ultra-efficient Neu brushless motors, titanium gear trains, low current consumption and constant output power, the HSB-93XX series of servos is the perfect match for the most discriminating pilots and racers. The HSB-9360’s speed is ideal for pilots with the need for speed!

Features:

  • Power Efficient Brushless Motor Controller
    Energy efficiency is a common interest for all modelers. Our HSB-9XXX Series uses the latest control circuit technology including a regenerative braking circuit which puts power back into the battery as the motor slows. This feature, combined with ultralow current draw under sustained loads, allows our brushless servos to consume 1/5 the power of most other brushless servos on the market today.
  • Custom NeuMotor
    Designed by Steve Neu exclusively for our HSB-9XXX Series, these high performance, brushless motors provide longstanding durability and performance.
  • Constant Torque Output:
    Thanks to our revolutionary circuit and motor designs, the HSB-9XXX Series maintain their speed in a more consistent manner, regardless of load.
  • Hybrid MPD 1st Gear:
    Our unique ultra-durable Metal/Plastic/duralumin hybrid first gear prevents inadvertent electrical noise from affecting other components within your aircraft or vehicle.
  • Industry-Leading Titanium Gear Train
    Hitec was the first manufacturer to utilize low wear Titanium gears in our servos and continues to be the leader in Titanium gear technology.
  • 25-Tooth Standard Spline
    Our Brushless servos utilize a standard 25 tooth output spline for maximum compatibility with the large variety of aftermarket horn available on the market these days.
     

    Specifications:

    • Torque:
      • 236 oz/in at 6V (17.0 kg-cm)
      • 236 oz/in at 7.4V (17.0 kg-cm)
         
    • Speed:
      • .08 sec at 6V
      • .06 sec at 7.4V
         
    • Voltage: 6V - 7.4V
    • Weight: 2.40oz (68g)
    • Size: 40 x 20 x 68 mm (1.57 x 0.79 x 1.50in)

HRCD950TW

$129.99