Hitec RDX4 4 Port AC/DC Multi-Function Smart Charger

Contact UsCustomer Reviews

Hitec RDX4 4 Port AC/DC Multi-Function Smart Charger

Market Price: $379.99
Our Price:

$239.99


You Save

37%

Quantity (3)

Availability 3 in stock
Weight 3.50 lbs
SKU HRC44354
Manufacturer Hitec

The Hitec RDX4 is a four port AC/DC Charger, delivering up to 100W at 10 amps per port. Connect four batteries of various chemistries to any of the independent channels, and enjoy efficient charging at home or in the field. This dual microprocessor-controlled charger/discharger features extensive battery management capabilities for maximum flexibility of your charging needs.

Capable of operating on 100 - 240 volts AC household current or from an 11 - 30 volt DC power source. It features an easyto- use LCD interface display and handy push button controls, while the front-panel XT60 connectors and XH balance ports help keep wiring uncluttered. Sport and advanced level hobbyists will appreciate the versatility and power of the quad port RDX4 for their 1/10th and 1/18th scale vehicles, 600+ size helicopters and larger sport and giant scale airplanes using up to 12S battery packs. Additional features include our “Charge Manager” software, providing the unprecedented ability to operate your charger via your personal computer plus a built-in Bluetooth for Smartphone app operation. Experience the future of charging with Hitec!

Features

  • 4 port AC/DC Charger delivers up to 100 watts per channel at 10 amps.
  • Built-in Bluetooth communication for use with iOS and Android Link Power X App.
  • Balance, Standard, Storage and Cycle Modes for All Lithium Battery Chemistries
  • Battery Resistance Meter
  • Terminal Voltage Control
  • Re-Peak Charge Mode and Delta-Peak Sensitivity for NiMH/NiCd Batteries
  • Capacity Cut-Off Limit
  • Built-in Power Supply Function for Powering Devices up to 27V @ 10A

Technical Specifications

  • 100V – 240V AC Operating Voltage Range
  • LiPo, LiFe & LiIon Cell Count: 1-6 Cells
  • NiCd/NiMH Cell Count: 2-15 Cells
  • Pb Lead-Acid Based Cell Count: 6-24V
  • Charge Circuit Power: 200W AC / 400W DC (Max 200W per port)
  • Discharge Circuit Power: 10W
  • PC Interface with Downloadable Software
  • Dimensions: 4.8 x 4.7 x 3.1 in.
  • Weight: 1.50 lbs

Hitec Charge Manager Software 1.09 for select RDX Series Chargers*

Charge Manager V1.09 ** (April 2024)

Hitec Charge Master Software 1.07 for select RDX Series Chargers*

Charge Master V1.07 ** (February 2024)

*For use with chargers with internal USB output
**Note: To program and save presets in Windows 10, you must run this software as administrator.

 

: *
: *
: *
 

Bob Smith Industries IC-LOC Blue Medium Strength Thread Locker

Untitled Document

Description:

Bob Smith Industries CA Glue

Super-Gold+™ Odorless, CA

SUPER-GOLD™ and SUPER-GOLD+™ are our odorless INSTA-CURE CAs They are non-frosting and take only 2 or 3 seconds longer to bond. There are no fumes that irritate the nose and eyes. The SUPER-GOLD™’s do not attack white foam; therefore, they can be used in the building of foam core wings and the assembly and repair of plastic and foam ARF’s. They will not fog clear plastic. SUPER-GOLD+™ is ideal for attaching clear canopies in plastic model kits; however, MAXI-CURE™ is still recommended for assembling the rest of plastic kits. Wood can be bonded to white foam with SUPER-GOLD +™ in less than fifteen seconds. For bonding foam to foam, spray a very light fog of INSTA-SET™ to one piece and apply SUPER-GOLD+™ to the other before joining. Excess INSTA-SET™ may create too much heat, which can melt the foam. Both SUPER-GOLD™’s cure to a more flexible consistency for better shock absorbtion. Whenever a large amount of CA is to be used in such applications as saturating fiberglass or Kevlar, SUPER-GOLD™ eliminates the irritating fumes from the evaporating monomer that make repeated use of CA unpleasant at times.

 

Works Best On:

  • Rubber
  • White Foam

Works Good On:

  • Balsa Wood
  • Soft Wood
  • Hard Wood
  • Glass & Metal
  • Fiberglass
  • Ceramics
  • Hard Plastics
  • Laminating
  • Water-Resistant
  • Reinforcing
  • CA Hinges

 

Avaliable in 2oz and 3/4 Pocket Size.

Pocket CAs feature a new top that has a pin built into the cap that covers the nozzle. This pin seals the bottle so that if it is tipped over, the bottle will not leak. This makes the Pocket CAs ideal for keeping in your tool or field box, just like our IC-Gel. One disadvantage that the new Pocket CA top has is the bluntness of the nozzle. This makes it more difficult to apply small amounts of the CA, especially in tight places. From the feedback we have received, it appears about 25-30% of users prefer the new Pocket CA top, which means that over 70% prefer our standard top for general bonding purposes. Most users are buying both types. Our original top for the workshop, and the Pocket CA for use out in the field. The 3/4 oz. Pocket CAs are available in BSI's Insta-Cure, Insta-Cure+, Maxi-Cure and Super-Gold+. BSI's new extender tip #304 works on the Pocket CA.

 

Click to Download Safety Data Sheet

BSI-IC-171-

$5.99

RCGF 20CC SE Stinger Gas Engine

RCGF 20CC SE Stinger Gas Engine 

 

RCGF-20CC--SE

$239.99

Venom DRIVE 50C 3S 5000mAh 11.1V LiPo Battery with UNI 2.0 Plug

Venom DRIVE 50C 3S 5000mAh 11.1V LiPo Battery with UNI 2.0 Plug

VNR15059

$80.99