A-550 3D 6-Axis Gyro Aerobatic Stunt Plane - RTF

Ask a question about this product

Printable version

Options

Our Price:

$119.99

Color

Battery Combo

Quantity (5)

Notify me when back in stock

Details


Availability	5 in stock
Weight	3.50 lbs
SKU	HT-A550-3D-RTF-Red

A-550 3D 6-Axis Gyro Aerobatic Stunt Plane - RTF

The A-550 3D Aerobatic Stunt Plane is a unique Ready to Fly (RTF) airplane with a 6-axis gyro to provide stabilization on those windy days. With 3 diferent flight modes and the flick of a switch, it can fly vertical 3D hover mode, or switch into airplane 6-axis gyro mode with increaed stability or switch to 3D mode with no gyro or flight control assist. With the High-Efficiency Brushless Motor, the A-550 features powerful performance for exhilarating 3D fun. This plane comes RTF with everything needed to fly out of the box. The Flight Control System has 2 receiver conversion sockets. One is 5V for Futaba (S-Bus) and other receivers with (S-Bus) ports. The other socket is 3V and supports DSMX/DSM2 receivers. It is the perfect choice for any RC fan looking to fly extreme 3D stunts yet suitable for beginners wanting to learn 3D flying.

See it in action click here:

Features:

Ready to Fly ("RTF")
Easy for beginners and intermediate RC pilots
3 Flight Modes: 3D hover, 6-axis gyro mode increased stability, or manual mode with no gyro or flight control inputs
Manufactured with strong damage-resistant EPO/EPP material
Built-in 6-Axis Gyroscope for smooth stable flying (2 receiver sockets Futaba (FHSS) or DSMX/DSM2 RXs)
3D / 6G modes (3D mode for aerobatic fun fly and 6G mode for stabilized flight)
Equipped with powerful brushless motor with plenty of power and great performance
High quality 2.4GHz remote controller with 300m control range!

Specs:

Wingspan: 505mm (19.9")
Fuselage length: 620mm (24.4")
Material: EPP/EPO
Take off weight: 140g
Motor: 2004 KV2800
Propeller: 6x3 (2 props included)

Includes:

A-550 505mm (20") Wingspan - RTF
2S 7.4V 520mAh LiPo battery
2.4GHz 6-Channel Transmitter
Charger

Requires:

Four (4) AA size batteries for the radio transmitter

This plane includes everything Ready to Fly (RTF)!

HUBSAN X4 107L RTF

HUBSAN X4 107L
RTF (2.4ghz 4 channel radio included!)!

Say hello to the newest member of the RedwingRC family. The Hubsan X4 Quadcopter!!

This quadcopter is Ready-To-Fly right out of the box. Suitable for indoor and outdoor flying. The 6-axis flight control system allows the Hubsan X4 to maintain stable flight even in light wind conditions.

Meet the Hubsan X4

Setup and Operation

Promo Video

Features:

Measures- 2.3 x 2.3 x 1.2 inches at 1.1 pounds
Latest 6-axis flight control system with adjustable gyro sensitivity
Permits super stable flight. With 4 channels
Lightweight airframe with nice durability
4-ways flip (left, right, forward, and backward)
Upgraded with 4 LED night lights
4 channels and operates at 2.4 GHz.

Battery voltage: 3.7V
Capacity: 240mAh
Flight time: above 9 minutes
Charging time:30 minutes
Flying range of about 30 meters / 98 feet
USB charging ability, you can charge it from your computer! How cool is that!?

Hubsan X4-

$39.99 39.99

BMS-2109, HV-DIGITAL, HIGH TORQUE, ULTRA HIGH SPEED, CORELESS, TITANIUM GEARS

BMS-2109, HV-DIGITAL, HIGH TORQUE. HIGH SPEED, CORELESS, TITANIUM GEARS

BBR-BMS-2109

$50.00 50.00

Bob Smith Industries 304 Pocket CA Extender Tips for Pocket CA Tops (6 Pack)

UN-CURE™ debonder will soften cured CA. If parts are bonded incorrectly or your fingers are stuck together, a few drops of UN-CURE™ will dissolve the CA in about a minute. Apply on bonded skin and roll apart fingers. Once stuck, use acetone to clean off softened CA, then wash off with soap and water. Since cured CA is essentially acrylic plastic, anything that will dissolve CA will also soften most plastics. Care must be used, therefore, when using Un-Cure on plastics. Separating plastics parts with a razor saw is usually the best option. Un-Cure™ will soften cured super glue (aka cyanoacrylate, CA). To release bonded skin (not near the eyes) apply Un-Cure™, then use a small, rounded object like a paperclip to separate the skin with a peeling action, applying more Un-Cure™ as needed until the skin areas are debonded. Wash the area with soap and water. The natural shedding of the skin’s outer layer will remove any residual CA within 12 hr. For removing CA from hard surfaces, soak a cloth or paper towel in Un-Cure™ and rub areas vigorously. Un-Cure™, however, will mar most plastics.