Spirit of St. Louis Micro RTF Airplane

Contact UsCustomer Reviews

Spirit of St. Louis Micro RTF Airplane

Our Price:

$129.99

Quantity

OUT OF STOCK


Availability No items available
Weight 4.50 lbs
SKU RGRA1100

The Spirit of St. Louis, flown by Charles Lindbergh, made the first solo non-stop transatlantic flight from Long Island, New York, to Paris, France departing on May 20th and arriving on May 21st, 1927. Officially known as the "Ryan NYP" (for New York to Paris), the Spirit of St. Louis was a custom-built, single engine, single-seat monoplane designed by Donald A. Hall of Ryan Airlines. It was named Spirit of St. Louis in honor of Lindbergh's supporters from his hometown of St. Louis, Missouri. To save design time, the NYP was loosely based on the company's 1926 Ryan M-2 mail plane with the main difference being the 4,000-mile range of the NYP. As a non-standard design, the government assigned it the registration number N-X-211 (X for "experimental"). 

More than any other airplane, the Spirit of St. Louis captured the imagination of the country and led to the Golden Age of flight in the US. Due to extremely light wing-loading, the RageTM Spirit of St. Louis provides smooth, yet capable flight performance (either indoors or outdoors in light winds) that's ideal for sport or expert pilots. Experience the nostalgia of the original with scale features that include a highly-detailed scale 9-cylinder Wright Whirlwind dummy engine, a full-airfoil wing design with rib details and fuel tank vents, detailed scale landing gear and struts, and even the official name - "Ryan NYP", and registration number N-X-211 in realistic scale water slide graphics on the tail. 

The Spirit of St. Louis comes fully assembled as a RTF (Ready-To-Fly), so everything needed to fly comes included in the box. In addition to the scale airframe with the installed 3-in-1 control board, you get a 2.4GHz transmitter that conveniently charges the included 1S 150mAh LiPo battery. Even the AA batteries needed to power up the transmitter are included, so you can be making your maiden flight on this amazingly detailed, historic airplane within minutes of opening the box!

Key Features:

  • Ultra-micro sized scale model of the historic Spirit of St. Louis airplane
  • Smooth and capable flight performance that's perfect for sport or expert pilots
  • Full-airfoil wing design with rib details and fuel tank vents
  • Highly detailed scale 9-cylinder Wright Whirlwind dummy engine
  • Beautiful, realistic scale water slide graphics
  • Detailed landing gear and struts
  • Extremely light weight at just 1.4oz (41g ready-to-fly)
  • Up to 7-minute flight time on single 150mAh battery
  • 4-channel capable transmitter with 2.4GHz & convenient built-in LiPo battery charger
  • 3-in-1 control board includes receiver, ESC, and 2 proportional servos
  • Packaging functions as storage and carry case eliminates hangar rash.
  • Wingspan: 22-3/4" (577.85mm)
  • Length: 13-3/4" (349.25mm)
  • Wing Area: 75.5 sq.in. (4.87sq.dm.)
  • Weight with Battery: 1.5 oz. (41g)
  • Battery: 1S 3.7V 150mAh LiPo
  • Transmitter: 4-channel capable 2.4GHz with integrated LiPo charger
  • On-Board-Electronics: 3-in-1 Receiver (2 servos/ESC)


 

: *
: *
: *
 

Bob Smith Industries Insta-Cure Super Thin CA

Untitled Document

Description:

Bob Smith Industries CA Glue

Insta-Cure™

Insta-Cure™ has a water-thin viscosity that wicks deep into joints by capillary action and cures in a matter of a few seconds. Surfaces to be bonded must be tight fitting and should be held together while you apply the CA around the edges of the seam. At the moment CAs cure, they give off a vapor that can irritate the nose and eyes, so be prepared. Thin CAs work very well on balsa since they penetrate into the wood and form more than just a surface bond.

Works Best On:

  • Balsa Wood
  • Ceramics

Works Good On:

  • Soft Wood
  • Fiberglass
  • Hard Plastics
  • Water-Resistant
  • CA Hinges

 

Avaliable in 2oz and 3/4 Pocket Size.

Pocket CAs feature a new top that has a pin built into the cap that covers the nozzle. This pin seals the bottle so that if it is tipped over, the bottle will not leak. This makes the Pocket CAs ideal for keeping in your tool or field box, just like our IC-Gel. One disadvantage that the new Pocket CA top has is the bluntness of the nozzle. This makes it more difficult to apply small amounts of the CA, especially in tight places. From the feedback we have received, it appears about 25-30% of users prefer the new Pocket CA top, which means that over 70% prefer our standard top for general bonding purposes. Most users are buying both types. Our original top for the workshop, and the Pocket CA for use out in the field. The 3/4 oz. Pocket CAs are available in BSI's Insta-Cure, Insta-Cure+, Maxi-Cure and Super-Gold+. BSI's new extender tip #304 works on the Pocket CA.

 

Click to Download Safety Data Sheet

 

 

 

BSI-CA-

$9.99

Cross RC MC8 1/10 8x4 Miltary Truck Kit

Cross RC MC8 1/10 8x4 Miltary Truck Kit

CZRMC8C

$949.99

RCGF 40CC Twin Stinger Gas Engine

RCGF 40CC Twin Stinger Gas Engine

 

RCGF-40cc-Twin

$449.99