RedwingRC High Quality Gas and Electric Planes, Quad Copters, and Jets

GT-Cygnus F3L and F5L RES 1970mm ARF (F3/F5-RES Competition Pure Glider or Electric Motor)

Ask a question about this product

Printable version

Options

Our Price:

$450.00

Version

Quantity (3)

Notify me when back in stock

Details


Availability	3 in stock
Weight	5.00 lbs
SKU	GT-F3L-Cygnus

GT-Cygnus F3L & F5L RES 1970mm ARF (Pure Glider and Electric Motor Glider)

The Cygnus F3L (Pure Glider) and F5L (Electric Powered) RES (Rudder/Elevator/Spoiler) gliders comply with the international and US regulations for the F3L and F5L competition classes. F3L/F5L is a group scored thermal duration contest for low tech 2 meter span RES (Rudder/Elevator/Spoiler) gliders.

Cygnus F3L ARF is a fully built pure glider ARF model with multicolored coverings where you only have to install the 3 servos (e.g. BDualsky DS169), a 2S 600mAh lipo and the receiver. Everything else has already been taken care of by the manufacturer.

Cygnus F5L ARF is a fully built electric powered ARF model with multicolored coverings where you only have to install the 3 servos, Motor, ESC and a 2S or 3S 600mAh lipo and the receiver. Everything else has already been taken care of by the manufacturer.

The two colored ironed ribbed wings with a double V shape are in 3 parts, the outer ears are attached with GRP connectors and secured with tape, the anti-twist protection is pins. There is a large brake flap (spoiler) with magnet in the middle section for precise landings and safe exit from thermals.

The front fuselage is made of balsa wood and the tailplane is made of CFRP. The large side cabin lid with magnetic closure provides generous access and installation space for servos, receivers and batteries. The built-in high start hook is adjustable. The wing is screwed on from above with 2 screws. The elevator and rudder are weight-optimized, built in a conventional ribbed design and finished with ironing. The elevator is removable and is screwed on, the rudder is firmly glued. The rudder and elevator linkage is done with cables and spring return.

Specs:

Wing Span: 1970MM
Length: 1250MM
Flight Weight: 420-430g (F3L); 450-480g (F5L) Depending on equipment
Servos: Micro Thin 9g servo*3 pcs (not included)
Motor: XM2225EG-2700KV (F5L not included)
ESC: 20A (F5L not included)
Prop: 7x4 or 8x6 depending on motor used (F5L only)
Battery: 2S (F3L) or 3S (F5L) 600mAh (not included)

Flat Rate shipping $20 for lower 48 USA only. Contact [email protected] to calculate international shipping cost.

Cygnus F5L

DLE 55RA Engine

+ Free Shipping (Continental US only!) If international customer, please contact us for shipping quote. You will be charged separately for shipping.
+ Free 2 Year warranty

Description:
More power! DLE takes 50cc performance to a new level with the rear exhaust DLE-55RA. Everything about this engine screams performance, from the piston skirt - designed to be lightweight for quick throttle response and tons of power - to the rear exhaust that lets you easily install a tuned pipe in your aircraft. The 55RA provides 100 more rpm than the standard DLE-55. It includes engines standoffs, electronic ignition, spark plug and Pitts style muffler.

To pick out your RedwingRC Props Click here.

Download DLE 55RA Mounting Template
Download DLE 55RA Manual Coming Soon

Specifications:

Displacement: 55.6 cc (3.392 cu in)
Bore: 1.77 in (45 mm)
Stroke: 1.38 X in (35 mm)
Weight: 3.6 lb (1.65 g)
Output: 5.5 hp @ 8,500 rpm
Requires: unleaded gasoline, oil, ignition battery & propeller
Includes: electronic ignition, muffler, spark plug, gasket, bolts, machined aluminum standoffs, throttle arm extension & mounting template
Suggested Propellers: 23x8, 24x8
Ignition Battery: 4.8-6.0V NiCd or NiMH, 6.6V LiFe or 7.4V LiPo pack (LiPo use requires voltage regulator.)
Compression Ratio: 7.6:1
Gas/Oil Mix: Break in with Lawn Boy(or similar non synthetic oil) at 32:1 Ratio per gallon / Use RedLine oil at 50:1 for long term use after break in.
Replacement Spark Plug: NGK CM6 (DLEG55RA10) or equivalent
Weights (Individual): Engine: 47 oz (1,350 g); Exhaust: 3.1 oz (100 g); Ignition: 5.1oz (120 g)
Recommended Propeller: Redwing 23x8, 24X8. 23x8 is a nice mix of 3d and sport. The 24x8 is more 3d

Features:

Two crankshaft bearings-simple design for lighter weight
Aluminum alloy crankcase
Four petal V-type reed valve bottom induction system
Walbro carburetor
Fully automatic electronic ignition
Two year limited warranty
INCLUDES: Engine, spark plug, standoffs, ignition, muffler, instruction manual

DLE-55 RA

$449.99 449.99

SmartDesign V3 "Trouble Free" Tail Wheel Assembly

Description:

This tail wheel assembly is extremely efficient and reliable. With fewer parts, there is less to worry about and the solid construction makes it the go-to choice for pilots at any skill level. The new V2 design incorporates ball bearings for smooth motion, ball-joint to rudder steering connection, wider CF mounting plate, and slightly larger wheels that the v1. "Trouble Free" means just that... no more worrying about screws falling out or loss of control. Make the switch today by installing the SmartDesign Tail Wheel!!!

CNC Aluminum & C.F. Tail Wheel Assembly for 20cc to 220cc

Features: