MULTIPLEX (MPX) Triple Servo Harness 6" Male 6" Female (3 Channels 1 Plug) 20 AWG
MPX High Amp Triple Servo Harness with 6" Male/6" Female 20 AWG 100 Strand wire Running 6 aileron servo's or flaps, ailerons and gear on each wing panel? Tired of marking and making 6 connections all the time? Redwing RC offers the perfect solution! This high quality accessory provides a faster and easier field assembly with a much cleaner install. Simply attach your servo extensions to the female MPX plug extension and plug the JR connectors of the male MPX extension into the receiver. This version has a flanged male MPX connector suitable for permanently mounting to your fuselage providing a simple one plug interface for each wing and is the perfect solution for 42% 3 servo wing panels. Also great for warbirds and jets! One channel can be ailerons, one for flaps and one for electric landing gear! Most installations will require 2 sets, one for each wing panel. 1 Set Includes: 1 male MPX with flange and (3) 6” 20 AWG wires with JR connectors and 1 female MPX with (3) 6” 20 AWG wires with female universal pin connectors for servos. WARNING PLEASE READ BEFORE PURCHASE and USE: This harness has 3 outputs, two of which share common ground. If you are using this product for retracts, carefully pull back the shrink wrap and find the output not sharing with another! If you do not, you can cause your retract controller to fail as they don't like constant voltage. When your find the stand alone output this is safe to use with retracts, flaps, and ailerons.
|
MULTIPLEX (MPX) Dual Servo Harness 6" Male 6" Female (2 Channels 1 Plug) 20 AWG
|
Description:
|
MPX-Dual-6/6
$14.99
MULTIPLEX (MPX) Dual Servo Harness 12" Male 12" Female (2 Channels 1 Plug) 20 AWG
|
Description:
|
MPX-Dual-12/12
$15.99
Zap Z-Ends (10pcs) & Teflon Tubing
| Zap Z-Ends (10pcs) & Teflon Tubing
Description:Bob Smith Industries CA Glue Super-Gold+™ Odorless, CASUPER-GOLD™ and SUPER-GOLD+™ are our odorless INSTA-CURE CAs They are non-frosting and take only 2 or 3 seconds longer to bond. There are no fumes that irritate the nose and eyes. The SUPER-GOLD™’s do not attack white foam; therefore, they can be used in the building of foam core wings and the assembly and repair of plastic and foam ARF’s. They will not fog clear plastic. SUPER-GOLD+™ is ideal for attaching clear canopies in plastic model kits; however, MAXI-CURE™ is still recommended for assembling the rest of plastic kits. Wood can be bonded to white foam with SUPER-GOLD +™ in less than fifteen seconds. For bonding foam to foam, spray a very light fog of INSTA-SET™ to one piece and apply SUPER-GOLD+™ to the other before joining. Excess INSTA-SET™ may create too much heat, which can melt the foam. Both SUPER-GOLD™’s cure to a more flexible consistency for better shock absorbtion. Whenever a large amount of CA is to be used in such applications as saturating fiberglass or Kevlar, SUPER-GOLD™ eliminates the irritating fumes from the evaporating monomer that make repeated use of CA unpleasant at times.
Works Best On:
Works Good On:
Avaliable in 2oz and 3/4 Pocket Size. Pocket CAs feature a new top that has a pin built into the cap that covers the nozzle. This pin seals the bottle so that if it is tipped over, the bottle will not leak. This makes the Pocket CAs ideal for keeping in your tool or field box, just like our IC-Gel. One disadvantage that the new Pocket CA top has is the bluntness of the nozzle. This makes it more difficult to apply small amounts of the CA, especially in tight places. From the feedback we have received, it appears about 25-30% of users prefer the new Pocket CA top, which means that over 70% prefer our standard top for general bonding purposes. Most users are buying both types. Our original top for the workshop, and the Pocket CA for use out in the field. The 3/4 oz. Pocket CAs are available in BSI's Insta-Cure, Insta-Cure+, Maxi-Cure and Super-Gold+. BSI's new extender tip #304 works on the Pocket CA.
|
PT-18
$4.99
