Do a lot of soldering or make your own servo connectors? These wire strippers make taking the insulation off of wires a quick and simple process. Designed as a simple no fuss solution, these wire strippers are a Modeller's dream. Able to strip up to 10AWG wire, making it perfect for small sized and larger scale models.
These Auto Self-Adjusting Wire Strippers are so simple to use, Simply set the length using the guide, place the wire between the jaws and squeeze the trigger grip. The insulation will simply slide off, no need to cut or hack at the insulation, they will effortlessly remove the wire coating without damaging the copper inside, giveing you the best outcome ready to start soldering.
The Auto Wire Strippers also come with an easy to use crimper and wire cutter, making it the perfect tool in the DIY's tool Arsenal.
Booma RC pin flag switch for IntelliReg, Smart-Fly or Gryphon regulator. This pin flag switch Booma RC is an ultra high quality fail safe switch designed as a replacement switch for Smart-Fly systems, Power System, Power Expander, Regulators as well…
ProLine Heavy Duty Servo Cables (20Awg for HV)
Booma RC pin flag switch for IntelliReg, Smart-Fly or Gryphon regulator. This pin flag switch Booma RC is an ultra high quality fail safe switch designed as a replacement switch for Smart-Fly systems, Power System, Power Expander, Regulators as well as Gryphon Heli regulators.
Supplied with 1 x switch actuator and 1 x pin flags.
Futaba & JR Style "Locking" Servo Connectors (4 Pair)
High quality 22AWG wire, twisted silicone wire extensions. JR type connections, so they will plug into any receiver/switch, and most servos (Hitec/JR/PowerHD/etc etc....futaba you would have to trim the edge off).
Soft
…
Futaba & JR Style "Locking" Servo Connectors (4 Pair)
High quality 22AWG wire, twisted silicone wire extensions. JR type connections, so they will plug into any receiver/switch, and most servos (Hitec/JR/PowerHD/etc etc....futaba you would have to trim the edge off).
Precision Crimping Tool for JR/Futaba Servo Leads & Terminals
High quality 22AWG wire, twisted silicone wire extensions. JR type connections, so they will plug into any receiver/switch, and most servos (Hitec/JR/PowerHD/etc etc....futaba you would have to trim the edge off).
Soft
…
Precision Crimping Tool for JR/Futaba Servo Leads & Terminals
High quality 22AWG wire, twisted silicone wire extensions. JR type connections, so they will plug into any receiver/switch, and most servos (Hitec/JR/PowerHD/etc etc....futaba you would have to trim the edge off).
Precision 6" Digital Caliper w/LCD Display & Hard Case
High quality 22AWG wire, twisted silicone wire extensions. JR type connections, so they will plug into any receiver/switch, and most servos (Hitec/JR/PowerHD/etc etc....futaba you would have to trim the edge off).
Soft
…
Precision 6" Digital Caliper w/LCD Display & Hard Case
High quality 22AWG wire, twisted silicone wire extensions. JR type connections, so they will plug into any receiver/switch, and most servos (Hitec/JR/PowerHD/etc etc....futaba you would have to trim the edge off).
200 Meters Bulk JR High Grade 20 AWG Servo Extension Wire (Twisted Orange, Red, Brown)
High quality 22AWG wire, twisted silicone wire extensions. JR type connections, so they will plug into any receiver/switch, and most servos (Hitec/JR/PowerHD/etc etc....futaba you would have to trim the edge off).…
200 Meters Bulk JR High Grade 20 AWG Servo Extension Wire (Twisted Orange, Red, Brown)
High quality 22AWG wire, twisted silicone wire extensions. JR type connections, so they will plug into any receiver/switch, and most servos (Hitec/JR/PowerHD/etc etc....futaba you would have to trim the edge off).
Description: Miracle Switches use heavy duty 22AWG silicone wire. Switches can be used for dual redundant receiver battery packs or for one receiver battery pack and one ignition battery pack. 3 options available
Specifications:
Dual Switch - 1.5oz
Dual Switch and
…
Description: Miracle Switches use heavy duty 22AWG silicone wire. Switches can be used for dual redundant receiver battery packs or for one receiver battery pack and one ignition battery pack. 3 options available
*Fourtitude has amended their fuel tanks due to federal regulations on shipping fuel containers. Check out the video below to see just how easy it is to assemble the tank!
Make sure to upgrade asap as this new and improved design is the…
The NEW Fortitude V2 gas tanks are here!!!
*Fourtitude has amended their fuel tanks due to federal regulations on shipping fuel containers. Check out the video below to see just how easy it is to assemble the tank!
Make sure to upgrade asap as this new and improved design is the cutting edge of next generation RC gas tanks. You are probably familiar with the old design- with the the line-in and the vent nozzle on the top of the tank and the line running to the engine on the cap. Because there are so many different fitting and sealants, there are alot of places where something can go wrong or start leaking.
The V2 design eliminates ALL of these problems with ONE SIMPLE DESIGN..... ALL nozzles are in the removable cap which has TWO rubber gaskets and is ONE SOLID PIECE, which includes the vent tube and filling tube. Fewer parts = Fewer problems.
Fortitude has hit the target with the V2 Tank and as always, is the best quality you can get!
Fortitude (or 4titude) gas tanks are high quality, crystal clear plastic tanks, that take the guesswork and worry out of your tanks. You can clearly see into the 4titude tank to know if your line is still flexible and your clunk is in place! Fortitude tanks include the foam, the Velcro and the tubing to hook to your engine!
4titude tanks are SUPER light, in fact, the lightest commercially available tanks on the market. They use aerospace grade adhesives to ensure long life. 4titude tanks are also made of seamless plastic, making them fully resistant to splitting!
The included clunk is filtered as well.
Video:
Video:
V2 Features:
Injection Molded Single piece glass filled nylon fitting manifold. Light weight extremely strong material that creates a very easy to plumb and compact fuel tank.
Dual static O-ring seals, designed utilizing the latest aerospace engineering technology, to seal fluid even under high pressure. V2 has one potential leak point and with the redundant static seals we have double assurance it will never leak.
Plumbed with a filtered clunk and an extended fill/ drain tube to make it easy to drain the tank completely.
Zero protrusions/ fittings on the outside of the tank to interfere with tight airframe installations.
We took care of making sure there is zero guess work involving installation. 3D diagram included with each tank showing how to properly plumb your fuel system for the best results.
Note the length dimension is from the back of the tank to the front of the fitting/tubing barbs.
Specs:
Size: 8 ounce (236 ML)
Length 5 3/8” x Width 1 7/8" x Height 1 7/8” (136.5 x 49.5 x 49.5 mm)
Weight: 1 ounce
Fittings are part of the cap/ internal tubing
Filtered clunk
Super light!
Crystal clear
Seamless
Includes: Tank/foam/velcro
Fourtitude Tanks are compatible with gas engines only. (Not compatible with Glow fuel)
Fortitude tanks are compatible with ALL oils, synthetic and non-synthetic. Fortitude uses PPG Class B sealant. The expert below explains how high tech and quality of a sealant it is:
“PPG Class B is an aircraft integral fuel tank sealant. It has a service temperature range from - 65°F (-54°C) to 250°F (121°C), with intermittent excursions up to 275°F (135°C). This material is designed for fillet sealing of fuel tanks and other air- craft fuselage sealing applications. The cured sealant maintains excellent elastomeric properties after pro- longed exposure to both jet fuel and aviation gas. "
Futaba & JR Style "Locking" Servo Connectors (4 Pair)
High quality 22AWG wire, twisted silicone wire extensions. JR type connections, so they will plug into any receiver/switch, and most servos (Hitec/JR/PowerHD/etc etc....futaba you would have to trim the edge off).
Soft
…
Futaba & JR Style "Locking" Servo Connectors (4 Pair)
High quality 22AWG wire, twisted silicone wire extensions. JR type connections, so they will plug into any receiver/switch, and most servos (Hitec/JR/PowerHD/etc etc....futaba you would have to trim the edge off).
