SR80 Pro 50mph Super High Speed Boat, Self Righting and All Metal Hardware (ARTR)
SR80 Pro 50mph Super High Speed Boat with Self Righting and All Metal Hardware (ARTR) The Vector SR80 Pro is equipped with power premium brushless motor and a 60A waterproof ESC, with top speeds reaching 50 MPH! The Self-Righting Hull Design gets you back in the race qyuickly if the boat capsizes and provides smooth stable turning on water. The power premium brushless motor will race at 50 MPH and blow other RC boats out of the water! It’s super fast speed will bring you WAVES of FUN! IMPROVED WATERPROOF DESIGN & ABS UNIBODY HULL provides a water tight space for electric equipment and only a single cover to help prevent water from entering the boat. Special ABS blown plastic material and unique uni-body hull design, provides a strong crack resistant structure and also features a unique self-righting design to help with capsize recovery. UNIQUE PROTECTION SYSTEM DESIGNS FOR EXTENDED FUN, Water-cooled system prevents the motor from overheating and built in safety features to protect the battery. If low voltage power is detected the TX will beep and the boat will slow down alerting the driver and allowing time to steer back to shore before engine shut down. ALMOST READY TO RUN (ARTR) Version, Fully assembled, no installation required. Includes transmitter, receiver and all electronic parts for the model. Requires battery, charger and 4 AA batteries for transmitter. See special combo pricing above. Specifications:
ARTR Version Contents:
ARTR Version Required Parts (Not included):
$20 Flat Shipping US lower 48 only--contact us at [email protected] to calculate international shipping cost |
PULSE 2550mAh 3S 11.1V - Transmitter Battery - LiPo Battery
PULSE 2550mAh 3S 11.1V - Transmitter Battery - LiPo Battery
Description:Pulse Lithium Polymer Batteries - Setting a New Standard. As Lithium Polymer battery technology continues to push new boundaries, Pulse Lithium Polymer Batteries bring a whole new element into the mix - power & performance at a price that simply can't be ignored. Pulse Batteries Available Individually or in a PRE-MADE System!Take the guesswork out of your electric battery set up- we've done it for you! Check out the suggested set up systems for 30cc and 50cc. LiPo 4500mah 5S, 18.5v - $104.99 each 30cc 10S System: Two (2) LiPo 4500mah 5S, 18.5v - $208
30cc 12S System #1: Two (2) LiPo 3300mah 45C 6S, 22.2v - $188
30cc 12S System #2: Two (2) LiPo 3700mah 45C 6S, 22.2v - $218
30cc 12S System #3: Two (2) LiPo 4100mah 45C 6S, 22.2v - $238
50cc 12S System #1: Two (2) LiPo 5000mah 45C 6S, 22.2v - $278
50cc 12S System #2: Two (2) LiPo 5500mah 45C 6S, 22.2v - $298
50cc 12S System #3: Two (2) LiPo 6000mah 35C 6S, 22.2v - $298
Purchase pre-made system or buy individually! Select below.
|
PLUTX-2550-3S
$27.99
1oz Z-Poxy 5 Min Syringe
| 1oz Z-Poxy 5 Min Syringe
Description:Bob Smith Industries CA Glue Super-Gold+™ Odorless, CASUPER-GOLD™ and SUPER-GOLD+™ are our odorless INSTA-CURE CAs They are non-frosting and take only 2 or 3 seconds longer to bond. There are no fumes that irritate the nose and eyes. The SUPER-GOLD™’s do not attack white foam; therefore, they can be used in the building of foam core wings and the assembly and repair of plastic and foam ARF’s. They will not fog clear plastic. SUPER-GOLD+™ is ideal for attaching clear canopies in plastic model kits; however, MAXI-CURE™ is still recommended for assembling the rest of plastic kits. Wood can be bonded to white foam with SUPER-GOLD +™ in less than fifteen seconds. For bonding foam to foam, spray a very light fog of INSTA-SET™ to one piece and apply SUPER-GOLD+™ to the other before joining. Excess INSTA-SET™ may create too much heat, which can melt the foam. Both SUPER-GOLD™’s cure to a more flexible consistency for better shock absorbtion. Whenever a large amount of CA is to be used in such applications as saturating fiberglass or Kevlar, SUPER-GOLD™ eliminates the irritating fumes from the evaporating monomer that make repeated use of CA unpleasant at times.
Works Best On:
Works Good On:
Avaliable in 2oz and 3/4 Pocket Size. Pocket CAs feature a new top that has a pin built into the cap that covers the nozzle. This pin seals the bottle so that if it is tipped over, the bottle will not leak. This makes the Pocket CAs ideal for keeping in your tool or field box, just like our IC-Gel. One disadvantage that the new Pocket CA top has is the bluntness of the nozzle. This makes it more difficult to apply small amounts of the CA, especially in tight places. From the feedback we have received, it appears about 25-30% of users prefer the new Pocket CA top, which means that over 70% prefer our standard top for general bonding purposes. Most users are buying both types. Our original top for the workshop, and the Pocket CA for use out in the field. The 3/4 oz. Pocket CAs are available in BSI's Insta-Cure, Insta-Cure+, Maxi-Cure and Super-Gold+. BSI's new extender tip #304 works on the Pocket CA.
|
PT-36
$5.99
Supermarine Spitfire Micro RTF Airplane w/PASS System
| Supermarine Spitfire Micro RTF Airplane w/PASS System |
RGRA1303
$109.99
