Hunter Brushless 1/10 4WD Short Course Truck, Ready To Run

Contact UsCustomer Reviews

Hunter Brushless 1/10 4WD Short Course Truck, Ready To Run

Market Price: $347.99
Our Price:

$289.99

You Save

17%

Quantity (10)

Availability 10 in stock
Weight 5.30 lbs
SKU DHK8331

Hunter Brushless 1/10 4WD Short Course Truck, Ready To Run 


Expect more when you drive the Hunter BL SCT from DHK. Expect more reliability, more performance, more fun! DHK's 4WD Hunter BL SCT has the performance and brushless power to impress experienced drivers with an easy setup perfect for any skill level. The backbone of the Hunter BL SCT is the tough, double-deck chassis layout and competition suspension. This super stiff chassis and plush suspension is complimented by an advanced, tune-able, 3-differential four wheel drive (4X4) power train normally only reserved for 1/8th scale racers. These advanced differentials provide tune-ability (through the use of different differential oils) not found in other lesser RTR vehicles. Propulsion is a powerful brushless motor and ESC ready for any 2 cell LiPo battery or 6-7 cell NiMH battery pack. The Hunter BL SCT is loaded with even more superior design features from adjustable threaded shocks to its mid-motor design. Set the Hunter BL SCT for hard driving whether you're competing or bashing on any surface from asphalt to dirt. The Hunter BL SCT RTR is factory assembled and ready to use. Drive hard with the rugged, refined SCT design. Get out and win with the DHK Hunter BL SCT.

Items needed to complete:

  • 2 cell LiPo or 6-7 cell NiMH battery pack
  • Charger suited for battery
  • - 4 AA batteries

Features:

  • 2.4Ghz Radio system
  • Brushless motor (3970kv)
  • 50A waterproof ESC
  • 4WD
  • 35+ mph

Specifications:

  • L - 22.0"
  • W - 12.2"
  • H - 7.68"
  • Wheelbase - 13"
  • Items Required for Completion: 2S LiPo battery and suitable charger; 4AA batteries for transmitter
: *
: *
: *
 

Miracle Gas Tank- 12oz (360cc)

 

The NEW Fortitude V2 gas tanks are here!!!

 

*Fourtitude has amended their fuel tanks due to federal regulations on shipping fuel containers. Check out the video below to see just how easy it is to assemble the tank!

Make sure to upgrade asap as this new and improved design is the cutting edge of next generation RC gas tanks. You are probably familiar with the old design- with the the line-in and the vent nozzle on the top of the tank and the line running to the engine on the cap. Because there are so many different fitting and sealants, there are alot of places where something can go wrong or start leaking.

The V2 design eliminates ALL of these problems with ONE SIMPLE DESIGN..... ALL nozzles are in the removable cap which has TWO rubber gaskets and is ONE SOLID PIECE, which includes the vent tube and filling tube. Fewer parts = Fewer problems.

Fortitude has hit the target with the V2 Tank and as always, is the best quality you can get!

Fortitude (or 4titude) gas tanks are high quality, crystal clear plastic tanks, that take the guesswork and worry out of your tanks. You can clearly see into the 4titude tank to know if your line is still flexible and your clunk is in place! Fortitude tanks include the foam, the Velcro and the tubing to hook to your engine!

4titude tanks are SUPER light, in fact, the lightest commercially available tanks on the market. They use aerospace grade adhesives to ensure long life. 4titude tanks are also made of seamless plastic, making them fully resistant to splitting!

The included clunk is filtered as well.

Video:




Video:

 

V2 Features:

  • Injection Molded Single piece glass filled nylon fitting manifold. Light weight extremely strong material that creates a very easy to plumb and compact fuel tank.

  • Dual static O-ring seals, designed utilizing the latest aerospace engineering technology, to seal fluid even under high pressure.  V2 has one potential leak point and with the redundant static seals we have double assurance it will never leak.

  • Plumbed with a filtered clunk and an extended fill/ drain tube to make it easy to drain the tank completely.

  • Zero protrusions/ fittings on the outside of the tank to interfere with tight airframe installations.

  • We took care of making sure there is zero guess work involving installation. 3D diagram included with each tank showing how to properly plumb your fuel system for the best results.

 

 

Note the length dimension is from the back of the tank to the front of the fitting/tubing barbs.

Specs:

  • Size: 8 ounce (236 ML)
    • Length 5 3/8” x Width 1 7/8" x Height 1 7/8” (136.5 x 49.5 x 49.5 mm)
  • Weight: 1 ounce
  • Fittings are part of the cap/ internal tubing
  • Filtered clunk
  • Super light!
  • Crystal clear
  • Seamless
  • Includes: Tank/foam/velcro
  • Fourtitude Tanks are compatible with gas engines only. (Not compatible with Glow fuel)

 

 

 

Fortitude tanks are compatible with ALL oils, synthetic and non-synthetic. Fortitude uses PPG Class B sealant. The expert below explains how high tech and quality of a sealant it is:

“PPG Class B is an aircraft integral fuel tank sealant. It has a service temperature range from - 65°F (-54°C) to 250°F (121°C), with intermittent excursions up to 275°F (135°C). This material is designed for fillet sealing of fuel tanks and other air- craft fuselage sealing applications. The cured sealant maintains excellent elastomeric properties after pro- longed exposure to both jet fuel and aviation gas. "

 

 

 

MRC-FT12oz

$19.99

FUTABA 18SZA 2.4GHz FASST Airplane Spec Radio System w/ R7008SB Receiver

FUTABA 18SZA 2.4GHz FASST Airplane Spec Radio System w/ R7008SB Receiver 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Product Description

With 4 times the resolution of its predecessor, the Aurora 9, the Aurora 9X is sure to become a favorite among the most demanding pilots. It is HiTec's first triple protocol radio which allows selection from the G1 and G2 Adaptive Frequency Hopping Spread Spectrum (AFHSS) or Secure Link (SLT) 2.4GHz technologies. It features dual processors for fast low latency response and ultra-smooth 4096 resolution. With more than 30 additional programming enhancements and new dynamically assignable switches, it is sure to thrill sport and professional level airplane and helicopter pilots alike.

 

Features

 

  • Built in AFHSS 2.4GHZ / SLTTM Module (Single / Bi-Directional Selectable)
  • 4096 Resolution
  • Improved Latency (Dual Processor 7ms Frame Rate)
  • Vibration Mode
  • Included Touch Screen Stylus
  • Easy-to-Read, Easily Accessible 5.1-inch Wide Backlit LCD Touch Screen (320 x 80 Pixels)
  • Customizable Menu
  • One-Stop Model Type Setting
  • 3 Multi-Tasking Digital Trims
  • Fully Assignable Control Switches, Knobs, Sticks and Digital Trims
  • Ultra-Smooth Quad Ball Bearing Gimbals
  • Full-Size Comfortable Hand Grips (Top Quality Elastomer)
  • Selectable 4 Different Control Stick Modes, Plus 2 Additional Manual Modes (Software)
  • Easy Gimbal Mode Change and Tension Adjustment (Hardware)
  • Power Management System (Adjustable Backlight & Auto Shut-off Time)
  • Digital Trim Nano-Adjuster (200 Adjustable Trim Steps)





  •  
  •  
  •  
  •  

Standard Programming

  • 9 Assignable Control Channels
  • 3-Model Type Programming (ACRO/GLID/HELI)
  • 30-Model Memory
  • 20 Character Model Naming
  • 8 Flight Conditions with 10 Characters
  • Fail-Safe
  • Channel Function
  • EPA
  • Dual Rate & EXP* 
  • Sub-Trim
  • Servo Reverse
  • Servo Speed (up to 25 sec. in each direction)* 
  • Servo Monitor (Monitor & Servo Test)
  • 8 Programmable Mixes (5x 2-Point, 3x 7-Point Curves)**
  • Trainer
  • Throttle Lock

* Capable of a Maximum of 24 rates by 8 flight conditions and 3 switch positions
** Capable of a Maximum of 8 Rates by 8 Flight Conditions

HRP-FUT01004367-3

$999.99

XT90-S Anti-Spark Connectors

XT90 Anti-Spark Connectors 

Nylon T-connectors. These are VERY similar to Dean's style T connectors, and are fully compatible with Deans connectors.
Pack includes 5 male and 5 female connectors.



These connectors are made from Nylon, making them very tough and difficult to melt, even with the worst of soldering skills.





Features:

  • Durable nylon connectors
  • Compatible with Deans large connectors
  • Easy to solder
  • Positive/negative can only connect one way ensuring proper polarity

 

 

 

PRICE FOR PACKS OF 5 PAIR

 

 

 

EX-XT90S-antispark

$5.99