Tiger Moth 85" (2150mm) Giant Wingspan Balsa Wood Pre-Built ARF
Tiger Moth 85" (2150mm) Giant Wingspan Balsa Wood Pre-Built ARF For pilots who do not have time to build a kit. this ARF is a great alternative with about 90% complete you just need to make the final assembly. This model RC airplane kit has been designed after the historic 1930s DH 82a Tiger Moth airplane and can be flown Electric or Gas. Fly one of the most iconic planes in the world with the DW Hobby Tiger Moth ARF. Features
Technical specifications
Kit Version:
Required
$60 Flat Rate shipping lower 48 USA only! Email us at [email protected] to calculate international shipping costs. |
Fourtitude Single Tank Mounting Trays 32oz
| Makes mounting a single fuel tank or smoke tank much easier and stronger than with velcro straps alone. This tray design captures the neck of the tank for an exceptionally strong mounting solution. Works really well in warbirds and narrow fuselages where the installation is difficult to access. The tray is CNC cut from .125” (3mm) thick Birch plywood that assembles in minutes. |
FORA1132
$13.99
Bob Smith Industries 314 Replacement Top for Pocket CA Glues
| Bob Smith Industries 314 Replacement Top for Pocket CA Glues UN-CURE™ debonder will soften cured CA. If parts are bonded incorrectly or your fingers are stuck together, a few drops of UN-CURE™ will dissolve the CA in about a minute. Apply on bonded skin and roll apart fingers. Once stuck, use acetone to clean off softened CA, then wash off with soap and water. Since cured CA is essentially acrylic plastic, anything that will dissolve CA will also soften most plastics. Care must be used, therefore, when using Un-Cure on plastics. Separating plastics parts with a razor saw is usually the best option. Un-Cure™ will soften cured super glue (aka cyanoacrylate, CA). To release bonded skin (not near the eyes) apply Un-Cure™, then use a small, rounded object like a paperclip to separate the skin with a peeling action, applying more Un-Cure™ as needed until the skin areas are debonded. Wash the area with soap and water. The natural shedding of the skin’s outer layer will remove any residual CA within 12 hr. For removing CA from hard surfaces, soak a cloth or paper towel in Un-Cure™ and rub areas vigorously. Un-Cure™, however, will mar most plastics.
Works Best On:
Avaliable in 1 oz Size.
|
BSI-314
$0.79
89" Glider-Tow/Trainer (2.25M) Scale Wilga PZL-104 (30-35cc) ARF-Blue
50cc Monsun 102" The Monsun is an exciting airframe to look at and just spectacular to see in the air. Complete with step ladder, navigation and landing lights, front wheel steering, and more! The 50cc Monsun is a masterpiece that will amaze you and your friends at the flying field. Get ready for a new flying experience!
Features:
|
SS-Wilga-35-Blue
$489.99
