Fokker D. VII Scale German WWI Fighter Biplane (Giant Wingspan 82.7" 2100mm)

Contact UsCustomer Reviews
  0  
  4. Fokker D. VII Scale German WWI Fighter Biplane (Giant Wingspan 82.7" 2100mm)

Fokker D. VII Scale German WWI Fighter Biplane (Giant Wingspan 82.7" 2100mm)

Ask a question about this product
Printable version

Share

Options

Our Price:

$499.99
Wheel Combo
Machine Gun
Scale Engine
Quantity (5)

Details

Availability 5 in stock
Weight 65.00 lbs
SKU VP-Fokker D.VII

The Fokker D.VII was a German World War I fighter aircraft designed by Reinhold Platz of the Fokker-Flugzeugwerke. Germany produced around 3,300 D.VII aircraft in the second half of 1918. In service with the Luftstreitkräfte, the D.VII quickly proved itself to be a formidable aircraft. The Armistice ending the war specifically required Germany to surrender all D.VIIs to the Allies. Surviving aircraft saw much service with many countries in the years after World War I.

Specifications:

  • Wingspan: 2100mm
  • Wing Area:120dm2
  • Wing Loading:48g/dm2
  • Fuselage Length: 1550mm
  • Flying Weight: 5.8kg

Recommend Equipment:

  • Servos: ≥8KG
  • Motor: 3530 500KV with 100A ESC
  • Battery:6S-5200mah
  • Engine: Saito FG21
  • Prop: 14”

Note: Vintage wheels & Dummy guns/engine not included in the kit but can be purchased in drop down menus above.

Kit Features:

  • Scale detail and scheme-based on Fokker D. VII
  • Extremely lightweight, state-of-the-art all-wood construction
  • Complete Hardware Pack with PVC scale parts
  • Full-scale simulation metallic structure
  • Extensive Clear Drawings and full page color Instructions
  • Only Adhesives and Coverings are required to complete the airframe

Note:

KIT version does not include any electronic device.
Glue is not included.


















: *
: *
: *
 
Brass Collet with Tension Screw (10 pcs)

Brass Collet with Tension Screw (10 pcs)

Brass Collet with Tension Screw

VP-Brass-Collet-ACC01

$17.99

CNC Steel Turnbuckle (Tension Regulator) (10 pcs)

CNC Steel Turnbuckle (Tension Regulator) (10 pcs)

CNC Steel Turnbuckle Tension Regulator (10 pcs) 

VP-ACC02-Tension-Regulator

$29.99

HiTec 5645mg

HiTec 5645mg

Description:
The HS-5645MG is one of the best choices you can make for a 50cc sized plane for the cost. They will also work well in 30cc planes. It is fully programmable using Hi Tec's programmer. The combination of torque, speed, price and extreme holding power make it a favorite among pilots. Special alloy gears called “Alumite” offer tremendous strength yet are lightweight as well.


Specifications:

  • Torque:
    • 143 oz/in at 4.8V (10.3 kg/cm)
    • 168 oz/in at 6V (12.1 kg/cm)
       
  • Speed:
    • .23 sec at 4.8V
    • .18 sec at 6V
       
  • Voltage: 4.8V - 6V
  • Weight: 2.11oz (59.82g)
  • Size: 40.6 x 19.8 x 37.8mm (1.59 x 0.77 x 1.48in)
     
  • Motor Type: 3 Pole Ferrite
  • Bearing Type: Dual Ball Bearing
  • Gear Type: 3 Metal Gears and 1 Resin Metal Gear
  • Connector Wire Length: 11.81" (300mm)
  • Control System: +Pulse Width Control 1500usec Neutral
  • Required Pulse: 3-5 Volt Peak to Peak Square Wave
  • Operating Temperature Range: -20 to +60 Degree C
  • Operating Angle: 45 Deg. one side pulse traveling 400usec
  • 360 Modifiable: Yes
  • Direction: Clockwise/Pulse Traveling 1500 to 1900usec
  • Dead Band Width: 8usec
  • Potentiometer Drive: Indirect Drive
  • Current Drain (4.8V): 8.8mA/idle and 400mA no load operating
  • Current Drain (6.0V): 9.1mA/idle and 500mA no load operating

HS-5645mg

$45.99

DuBro Nitro Line Silicone Fuel Tubing, Orange 50'

DuBro Nitro Line Silicone Fuel Tubing, Orange 50'

50' Nitro Line Silicone Fuel Tubing, Orange 

DUB2240

$59.99

MPX to 4mm Banana Plug Battery Charge Cable

MPX to 4mm Banana Plug Battery Charge Cable

MPX to 4mm Banana Plug Battery Charge Cable

Description:

Male Deans to Male XT60 Connector

With this Deans to XT connector you can convert a battery with T-Plug to XT-60 on ESC / charger
The connector has many applications and can be used for charger adapter.

Features:

  • Male Deans T style plug to Male XT60
  • Durable design
  • Heatshrink seal

EX-MPX-Charge cable

$5.99


Back to Top