Phoenix V2 5 Channel 2M Professional Grade Glider (PNP)

Contact UsCustomer Reviews
  0  
  4. Phoenix V2 5 Channel 2M Professional Grade Glider (PNP)
more offers

Phoenix V2 5 Channel 2M Professional Grade Glider (PNP)

Ask a question about this product
Printable version

Share

Options

Market Price: $189.99
Our Price:

$179.99
You Save

5%
Charger Combo
Battery Combo
Extra Prop/Spinner
Quantity (3)

Details

Availability 3 in stock
Weight 5.00 lbs
SKU Phoenix-v2-759-2

Phoenix V2 5 Channel 2M Professional Grade Glider (PNP)

The Phoenix V2 is a 2-meter wingspan large glider with unibody plastic fuselage, that is more durable then EPP foam. Perfect for soaring or a gentle flight FPV tour using its camera mounting platform. Enjoy high-altitude aerial fun with the Phoenix V2 sport scale model glider that incorporates flaps unlike its full-scale counterpart.

  • SUPER AEROBATICS PERFORMANCE- The Phoenix V2 is a 5-channel glider, with powerful brushless out-runner motor. The professional glider design, allows long  slow flight without the need for power support enabling longer flight times up to 30min or longer!
  • EXCELLENT PAYLOAD CAPACITY- The flat FPV platform under the canopy has capacity for FPV equipment over 500g payload and is easy for your DIY videos.
  • INNOVATIVE UNIBODY PLASTIC FUSELAGE- The unibody plastic airframe is stronger than EPP foam and provides a strong crack resistant structure. This design provides good performance at altitude and offers flexible, lightweight protection in case of hard landings.
  • SUPER EASY TO ASSEMBLY- The wings are fitted with two spars to strengthen the wings and are attached with fast connecting wing clips.
  • PNP VERSION- Glider with all the elctronics included servo, brushless motor, brushless ESC; but requires radio transmitter, reciever, battery, and charger.

Specs:
Wingspan: 78.7" (2000mm)
Length: 44.6"
Flying Weight: 2.2 lbs
Motor: 4023/1050KV out runner brushless motor with 1060 Folding Propeller
ESC: Easy-Plug 30A brushless ESC
Servo: 9g x 4 (See all RedwingRC Servos)

PNP version Requires:
6 Channel Transmitter and Receiver 
3S 11.1V 2200mAh ~ 5000mAh Li-Po Battery (see all RedwingRC batteries/chargers) 
Battery Charger: Pulse Balance Charger (PLC100) see combo pricing

Product Manual: English

$20 Flat Shipping US only--contact us at [email protected] to calculate international shipping cost










: *
: *
: *
 
Miracle CNC Single Rudder Tray with Anodized Rudder Arm KIT

Miracle CNC Single Rudder Tray with Anodized Rudder Arm KIT

Miracle CNC Single Rudder Tray with Anodized Rudder Arm KIT

mrc-F-009

$36.99

Lemon RX DSMP 7-CH TELEMETRY STABILIZER & T-PLUG ENERGY METER (DSMX/DSM2 COMPATIBLE)

Lemon RX DSMP 7-CH TELEMETRY STABILIZER & T-PLUG ENERGY METER (DSMX/DSM2 COMPATIBLE)

Lemon RX DSMP 7-CH TELEMETRY STABILIZER & T-PLUG ENERGY METER (DSMX/DSM2 COMPATIBLE)

 

 

 

 

 

 

 

 

 

Description:

Lemon Rx DSMX Compatible 6-Channel Receiver + Lemon DSMX Compatible Satellite

 

Type: DSMX Compatible Full Range Receiver
Number of Channel: 6
Modulation: DSMX Compatible (Also DSM2 backward Compatible)
Band: 2.4 GHz
Dimension: 25(L) x 18(W) x 11(H)  mm
Weight: 4.5 grams + 2.5 grams
Voltage Range: 3.45 - 8.4 V

 

Highlight
- FailSafe for all channels via press of a button
- DSMX Satellite port



Understanding the receiver

 

Setup Instruction

Binding

  1. Plug bind plug to the receiver.
  2. Provide power to the unit. LED flashes quickly.
  3. Enable bind mode in transmitter and ensure distance separation of 2 meters from receiver. Solid LED light means binding is completed.
  4. Remove bind plug.

Setting Failsafe

  1. Start by binding the receiver to the transmitter in the normal way and proceed as follows to set failsafe
  2. Ensure that transmitter and receiver are turned on.
  3. Insert bind plug into the receiver (Note: to set failsafe, bind plug is applied only when the receiver is turned on).
  4. Set transmitter controls to the desired failsafe positions.
  5. Press the side pushbutton to memorize failsafe settings.
  6. Observe that the green light at the end of the receiver turns on to indicate failsafe is set. (Repeat step 4 will cause the LED to turn off which means failsafe is disabled).
  7. Remove bind plug.
  8. Disconnect the power for at least 2 seconds and then reconnect the power again. Test failsafe by turning off the transmitter.

 

 

 

LM-0086T

$41.99

Replacement Rubber Cap and Aluminum Starter Cone for 80-250cc ESTDT Electric Starter

Replacement Rubber Cap and Aluminum Starter Cone for 80-250cc ESTDT Electric Starter

Replacementr Rubber Cap and Aluminum Starter Cone for 80-250cc ESTDT Electric Starter

ESTDT-250cc-starter cap

$27.99


Back to Top