The flight controller stabilizer is a small lighweight, high performance, 3-Axis gyro. The gyro allows the option of independent aileron control, so you can have the benefits of a gyro yet retain flaperon, spoileron and or differential functions. Conversely you can still use a single channel to operate both ailerons making this gyro rather versatile. This version has also been enclosed in a robust housing for added protection.
The gyro supports 3 types of fixed-wing planes--Standard Wing, Flying Wing and V-Tail. With the latest MEMS technology the gyro provides excellent stability, flexibility, and reliability. Whether you are looking for sharp predictability from a 3D-plane or want to have the ability to fly smoothly in the wind, this gyro is a rock solid performer!
Features:
Easily switch between 3 modes: Gyro Off, Normal Flight and Enhancement mode
Great 3D flight performance without compromising stability
Horizontal self-stabilization
One-button rescue
3D Lock
Manual Flight mode
Easy to setup using independent gain adjustments for aileron, elevator and rudder
SUPER-GOLD™ and SUPER-GOLD+™ are our odorless INSTA-CURE CAs They are non-frosting and take only 2 or 3 seconds longer to bond. There are no fumes that irritate the nose and eyes. The SUPER-GOLD™’s do not attack white foam; therefore, they can be used in the building of foam core wings and the assembly and repair of plastic and foam ARF’s. They will not fog clear plastic. SUPER-GOLD+™ is ideal for attaching clear canopies in plastic model kits; however, MAXI-CURE™ is still recommended for assembling the rest of plastic kits. Wood can be bonded to white foam with SUPER-GOLD +™ in less than fifteen seconds. For bonding foam to foam, spray a very light fog of INSTA-SET™ to one piece and apply SUPER-GOLD+™ to the other before joining. Excess INSTA-SET™ may create too much heat, which can melt the foam. Both SUPER-GOLD™’s cure to a more flexible consistency for better shock absorbtion. Whenever a large amount of CA is to be used in such applications as saturating fiberglass or Kevlar, SUPER-GOLD™ eliminates the irritating fumes from the evaporating monomer that make repeated use of CA unpleasant at times.
Works Best On:
Rubber
White Foam
Works Good On:
Balsa Wood
Soft Wood
Hard Wood
Glass & Metal
Fiberglass
Ceramics
Hard Plastics
Laminating
Water-Resistant
Reinforcing
CA Hinges
Avaliable in 2oz and 3/4 Pocket Size.
Pocket CAs feature a new top that has a pin built into the cap that covers the nozzle. This pin seals the bottle so that if it is tipped over, the bottle will not leak. This makes the Pocket CAs ideal for keeping in your tool or field box, just like our IC-Gel. One disadvantage that the new Pocket CA top has is the bluntness of the nozzle. This makes it more difficult to apply small amounts of the CA, especially in tight places. From the feedback we have received, it appears about 25-30% of users prefer the new Pocket CA top, which means that over 70% prefer our standard top for general bonding purposes. Most users are buying both types. Our original top for the workshop, and the Pocket CA for use out in the field. The 3/4 oz. Pocket CAs are available in BSI's Insta-Cure, Insta-Cure+, Maxi-Cure and Super-Gold+. BSI's new extender tip #304 works on the Pocket CA.
Fourtitude ARF Smoke Tank- 50oz, smoke tank, gas tank, fuel tank
*Fourtitude has amended their fuel tanks due to federal regulations on shipping fuel containers. Check out the video below to see just how easy it is to assemble the tank!
Make sure to upgrade asap as this new and improved…
Fourtitude ARF Smoke Tank- 50oz, smoke tank, gas tank, fuel tank
*Fourtitude has amended their fuel tanks due to federal regulations on shipping fuel containers. Check out the video below to see just how easy it is to assemble the tank!
Make sure to upgrade asap as this new and improved design is the cutting edge of next generation RC gas tanks. You are probably familiar with the old design- with the the line-in and the vent nozzle on the top of the tank and the line running to the engine on the cap. Because there are so many different fitting and sealants, there are alot of places where something can go wrong or start leaking.
The V2 design eliminates ALL of these problems with ONE SIMPLE DESIGN..... ALL nozzles are in the removable cap which has TWO rubber gaskets and is ONE SOLID PIECE, which includes the vent tube and filling tube. Fewer parts = Fewer problems.
Fortitude has hit the target with the V2 Tank and as always, is the best quality you can get!
Fortitude (or 4titude) gas tanks are high quality, crystal clear plastic tanks, that take the guesswork and worry out of your tanks. You can clearly see into the 4titude tank to know if your line is still flexible and your clunk is in place! Fortitude tanks include the foam, the Velcro and the tubing to hook to your engine!
4titude tanks are SUPER light, in fact, the lightest commercially available tanks on the market. They use aerospace grade adhesives to ensure long life. 4titude tanks are also made of seamless plastic, making them fully resistant to splitting!
The included clunk is filtered as well.
Video:
Video:
V2 Features:
Injection Molded Single piece glass filled nylon fitting manifold. Light weight extremely strong material that creates a very easy to plumb and compact fuel tank.
Dual static O-ring seals, designed utilizing the latest aerospace engineering technology, to seal fluid even under high pressure. V2 has one potential leak point and with the redundant static seals we have double assurance it will never leak.
Plumbed with a filtered clunk and an extended fill/ drain tube to make it easy to drain the tank completely.
Zero protrusions/ fittings on the outside of the tank to interfere with tight airframe installations.
We took care of making sure there is zero guess work involving installation. 3D diagram included with each tank showing how to properly plumb your fuel system for the best results.
Note the length dimension is from the back of the tank to the front of the fitting/tubing barbs.
Specs:
Size: 16 oz (473 ml)
Length 7 3/8” x Width 2 3/8” x Height 2 3/8” (187.3 x 60 x 60 mm)
Weight: 1.5 oz
Fittings are part of the cap/ internal tubing
Filtered clunk
Super light!
Crystal clear
Seamless
Includes: Tank/foam/velcro
Fourtitude Tanks are compatible with gas engines only. (Not compatible with Glow fuel)
Fortitude tanks are compatible with ALL oils, synthetic and non-synthetic. Fortitude uses PPG Class B sealant. The expert below explains how high tech and quality of a sealant it is:
“PPG Class B is an aircraft integral fuel tank sealant. It has a service temperature range from - 65°F (-54°C) to 250°F (121°C), with intermittent excursions up to 275°F (135°C). This material is designed for fillet sealing of fuel tanks and other air- craft fuselage sealing applications. The cured sealant maintains excellent elastomeric properties after pro- longed exposure to both jet fuel and aviation gas. "
Raptor H650 Sea Land Air 490mm Wingspan 2.4GHz 6CH Smart Balance EPP RC
Do you feel the need for speed? Check out the Dynam Meteor V2. This is a High Speed 70mm EDF Sport Jet that features retracts! How cool is that?! The Meteor V2 is constructed with EPO crash resilient foam and it is pre-painted…
Raptor H650 Sea Land Air 490mm Wingspan 2.4GHz 6CH Smart Balance EPP RC
Do you feel the need for speed? Check out the Dynam Meteor V2. This is a High Speed 70mm EDF Sport Jet that features retracts! How cool is that?! The Meteor V2 is constructed with EPO crash resilient foam and it is pre-painted saving you time. If that's not enough, all servos, 70mm Fan, and the 60Amp ESC are factory pre-installed. This airplane is designed for High-Speed flying which is made possible with a powerful Brushless Electric Ducted-Fan. The Fan Unit is is very well constructed for High-Performance flying. In case you were wondering, this model is absolutely one of the fastest EPO EDF jet on the market.
Key Features:
Powerful 70mm EDF fan unit and motor
60A Brushless ESC with Switch-Mode BEC
retractable landing gear
Easy to build.
SUPER FAST
Specifications:
Wingspan:
35.8 inch (910mm)
Overall Length:
43.3 (1100mm)
Flying Weight:
38.8oz (1100g) w/Battery
Fan Unit:
70mm fan unit (installed with motor)
Motor Size:
Powerful 400 high speed outrunner brushless motors (installed)
Radio / Transmitter:
5 Channel Required - (Not Included)
Receiver:
5+ Channel (Not Included)
Servos:
4 servos installed ( 4 x 9g )
Speed Control :
1 x Dectrum 60A Brushless with Switch-Mode BEC (installed)
