2-in-1 5A UBEC Digital Voltage Regulator Step Down Switch

Tachometer, RCexl Mini Tachometer

Description:
You can use this RCexl mini tachometer to hook up directly to the ignition on the JC 28cc, or DLE engines to be able to view your RPM's at a glance. You can mount this mini-tach in your cockpit, or other visible area, and it runs off the battery power already supplied to your ignition. This is the newest RCexl (RCxl RCexcel) Version



Specifications:

• Input Voltage between 3.5 and 8.4 volts
• Current Consumption 25-60mA
• Size: 41mmx17mmx12mm
• Weight: .3oz

Features:

• Indicates up to 30,000 RPM
• Has and ULTRA-Bright LED so it can be easily read in daylight
• Standard Futaba plug
• Includes a Y Harness

Power Board - PRO SERIES - Black (4106)

All NEW 4000 SERIES! *with Digital Readout and Touch-button programming.

Description:

Completely redesigned from the ground up, with these new Power Boards you are able to use 2 batteries with redundancy to avoid possible crashes from battery failure. Simply plug in your batteries with XT-60 style connectors to this Power Board Expander (Our LiFe batteries are perfect for this) and you now have 2 batteries working in tandem to supply your servos AND ignition.

The Power Board board electronically isolates the batteries from each other so that there is no interference possible from your ignition. It also regulates the voltage down to an ideal voltage to your RX (5v) and then is select-able to your servos (yellow and black units only - the red unit offers the same voltage as your batteries to the servos).

You can Plug in, up to 8 servos into the board (12 servos with the Black Power Board), which has 2 outputs for EACH channel, effectively DOUBLING the number of servos you can use in a plane ( a total of 16 output channels) without reducing the amperage (that a Y cable would cause).

These Power Boards also features LED lights to give you clear indication that your batteries are connected and working properly, as well as voltage etc.

They feature a mounting space in the middle to mount your RX and also include mounting hardware to mount it securely to your plane.





Watch this video for an overview of the different versions


View this video for a full explanation on how to use these power boards




Features:

Black Power Board (4106)

• Dual battery redundancy for safer flying
• LCD display which shows real time info of your in and out voltages
• Built in regulator that supplies a clean 5v to your receiver
• Integrated CDI remote cut off switch to kill your engine (OPTO KILL)
• 8 channels in, 16 channels out (+ ignition)
• Electronically isolated for interference free flying
• Adjustable voltage selection to your servos via the dial on the side (from 4.8v to 9.7)
• Ability to use High voltage servos while providing a clean 5v to your RX
• Battery balancing (draws extremely evenly from your dual battery set up)
• Short Circuit protection (in the unlikely event of a short it will protect from battery drain)
  
  (input voltage MUST be between 6-13v. A 4S Life would be ideal)

Specs:

Black Power Board (4106)

• Input Voltage: 6-13v
• Working load: 0A to 30A
• Weight: 4.5 oz.
• Dimensions: 4.5"x2.5"x5/8"
• Working Temperature: -20c to -85c

Recommended Set ups: Use the Black Power Board for 50cc to 100cc or bigger.

Zap-A-Gap CA+ Glue 5-Single use tubes (Green Label)

Description:

Bob Smith Industries CA Glue

Super-Gold+™ Odorless, CA

SUPER-GOLD™ and SUPER-GOLD+™ are our odorless INSTA-CURE CAs They are non-frosting and take only 2 or 3 seconds longer to bond. There are no fumes that irritate the nose and eyes. The SUPER-GOLD™’s do not attack white foam; therefore, they can be used in the building of foam core wings and the assembly and repair of plastic and foam ARF’s. They will not fog clear plastic. SUPER-GOLD+™ is ideal for attaching clear canopies in plastic model kits; however, MAXI-CURE™ is still recommended for assembling the rest of plastic kits. Wood can be bonded to white foam with SUPER-GOLD +™ in less than fifteen seconds. For bonding foam to foam, spray a very light fog of INSTA-SET™ to one piece and apply SUPER-GOLD+™ to the other before joining. Excess INSTA-SET™ may create too much heat, which can melt the foam. Both SUPER-GOLD™’s cure to a more flexible consistency for better shock absorbtion. Whenever a large amount of CA is to be used in such applications as saturating fiberglass or Kevlar, SUPER-GOLD™ eliminates the irritating fumes from the evaporating monomer that make repeated use of CA unpleasant at times.

Works Best On:

• Rubber
• White Foam

Works Good On:

• Balsa Wood
• Soft Wood
• Hard Wood
• Glass & Metal
• Fiberglass
• Ceramics
• Hard Plastics
• Laminating
• Water-Resistant
• Reinforcing
• CA Hinges

Avaliable in 2oz and 3/4 Pocket Size.

Pocket CAs feature a new top that has a pin built into the cap that covers the nozzle. This pin seals the bottle so that if it is tipped over, the bottle will not leak. This makes the Pocket CAs ideal for keeping in your tool or field box, just like our IC-Gel. One disadvantage that the new Pocket CA top has is the bluntness of the nozzle. This makes it more difficult to apply small amounts of the CA, especially in tight places. From the feedback we have received, it appears about 25-30% of users prefer the new Pocket CA top, which means that over 70% prefer our standard top for general bonding purposes. Most users are buying both types. Our original top for the workshop, and the Pocket CA for use out in the field. The 3/4 oz. Pocket CAs are available in BSI's Insta-Cure, Insta-Cure+, Maxi-Cure and Super-Gold+. BSI's new extender tip #304 works on the Pocket CA.

Click to Download Safety Data Sheet