Muffler Extensions, Exhaust Tubes (Fits DLE and other engines)
Muffler Extensions These extensions fit over the exhaust exits on your muffler. Below are the size dimensions and the muffler that each should fit (new versions have different exhuast diameters). It is a good idea to measure the exits on your muffler and select the correct one based on your size. FORMAT: LxW (width is outside diameter) ID=inside diamerer A: 63x12mm ID:10mm:(DLE 20RA) B: 64x14mm ID:12mm:(DLE 35RA/40) C: 78x20mm ID:17.5mm :(DLE 30, DLE 55RA) D: 93x25mm ID:22.5mm:(DLE 55, DLE 61 (old), DLE 111, DLE 120) E: 116x30mm ID:27.5mm (DLE 61, DLE 85, DLE 170, DLE 222) *Sold individually- if you have a twin engine, you will need two extensions *metal clamp sold separately
|
DLE Muffler Extensions
DLE Muffler Extensions
Servo Safety Clips
| Description: |
EX-clip
$4.95
Bob Smith Industries Insta-Set
| Untitled Document Description:Bob Smith Industries Insta-Set Insta-Set™INSTA-SET™ is a catalyst which acts as an accelerator that allows CAs to quickly cure in thick layers by enhancing the alkaline conditions during polymerization. INSTA-SET™ in a spray bottle is normally used to cure the CA that flows from joints when parts are pressed together. Applying an additional bead of thick CA along a seam and then curing it with INSTA-SET™ significantly enhances a joint’s strength. For difficult to bond materials, INSTA-SET™ can be applied to one surface and CA to the opposite surface. When brought together, they will bond instantly. INSTA-SET™ is formulated with a strawberry scent and activates CA in 6 to 8 seconds without any degrading of the CAs strength, which can occur with many other accelerators. It is compatible with all surfaces, even clear plastic and white foam.
Directions: After joining parts with cyanoacrylate (CA, super glue), spray the seams with Insta-Set™ to cure the CA in 8 seconds. A bead of CA can then be applied to the outside and corners of joints before another application of Insta-Set™ to reinforce their strength. Insta-Set™ can also be applied to one part (with CA on the other) before joining for difficult to bond materials. Insta-Set™ is compatible with all surfaces, including clear plastic and all foams. It also is a great cleaning agent for adhesive residue and scuff marks. Store separately from CAs.
Works Best On:
Click to Download Safety Data Sheet
|
BSI-AC-151
$5.99
