Description:

Welcome to the world’s first Automatic Intelligent Servo Matching System (ISMS)

Intellimatch is the result of 2 years of research and development, is designed to take the worry out of servo matching and gives you the maximum power, smoothest response and increased life from your servos.

If you have built giant scale models before with multi servo control surfaces then I am sure you will be familiar with the process of manually matching the servos. You generally match servos on 2 end points and maybe a center point. That’s a total of only 3 matching points. There is no way 3 points will accurately match your servos. Also, you have to adjust each servo until minimal buzz is heard or you might use an ammeter to minimize current draw. Throw that idea away...

With the Booma RC Intellimatch you say goodbye to traditional methods of servo matching. The Intellimatch system automatically matches servos on 100 points through the servo sweep range. That is 100 points not just the traditional 2 or 3. Intellimatch further adds smoother operation by reading the closest 2 points from the servos current position and then interpolates between the 2 selected points to a resolution of 8192 steps. 8192 step resolution is the highest resolution available today.

The IM14 Intellimatch unit is designed to match 1 set of up to 4 servos. An example IM14 usage might be up to 4 rudder or ailerons servos

Read on for the full list of features

Model Example 1 - 100cc Scale Aero Model:

-2 Aileron Servos per aileron

-1 Elevator Servo per elevator

-2 Rudder servos

Suggested Power Bus Intellimatch Accessories

-2 x IM22 = 1 x IM22 for Ailerons and 1 x IM22 for Elevators

Model Example 2 - 150cc Scale Aero Model:

-3 Aileron Servos per aileron

-2 Elevator Servo per elevator

-3 Rudder servos

Suggested Power Bus Intellimatch Accessories:

-1 x IM22 = 1 x IM22 for Elevators

-2 x IM14 = for Ailerons

-1 x IM14 = for Rudder

Model Example 3 - Large Jet:

-2 Aileron Servos per aileron

-2 Flap Servos

-1 Elevator Servo per elevator

-2 Rudder servos

Suggested Power Bus Intellimatch Accessories:

-1 x IM22 = for right side Ailerons and Flaps

-1 x IM22 = for left side Ailerons and Flaps

-1 x IM22 = for Rudder

Specs:

• 32 bit Processor for the highest speed and resolution in the industry

• Automatic matching of up to 4 servos on a single channel

• 100 matched point across the servo sweep range

• 82 step real time interpolation between the 100 matched points

• PWM resolution of up to 8200 steps

• Dual LED indication for programming feedback

• Recommended battery chemistry - Life (2 cells), LiPo (2 cells), Lion (2 cells), NiCd(5cells),Nimh(5 cells)

• Maximum input voltage 10 volts

• Minimum input voltage 5 volts

• Compatible with all receivers and Power Distribution systems

• Works with Advanced Radio AR1232 and AR824. Also compatible with all other receiver and Power Distribution systems

• Dual fail safe arming with the supplied arming plug

• On board Flash storage - 100 year data retention

• Weight is only 12 grams

• Dimensions 49mm x 23mm (3.5 x 2.5 inches)

Taylorcraft Golden Age Micro RTF Airplane

Clarence Taylor, a self-taught aeronautical engineer from Nottingham, England, is considered one of the fathers of private aviation in America. He designed the original Taylor Cub in 1931 at Bradford, Pennsylvania, and along with his brother Gordon, formed Taylor Brothers Aircraft Corporation in Rochester, New York in 1926 with the slogan: "Buy Your Airplane Taylor Made". With a goal to build a personal aircraft superior to his original Cub, Taylor formed his own company in 1935 as Taylor-Young Airplane Company.

The Rage RC Taylorcraft is an ultra-micro sized model of Clarence Taylor's classic 1936 design, with a highly visible realistic trim scheme and details like pre-decorated wheel pants, and a convenient magnetic hatch on the battery compartment which provides convenient access and improves scale appearance. The model features a symmetrical airfoil design to enhance the scale appearance and provide smooth, stable flight performance either indoors in gymnasium-size buildings, or outdoors in light winds, and that's ideal for both aspiring and experienced pilots.

The Taylorcraft comes fully assembled as an RTF (Ready-To-Fly), so everything needed to fly is included in the box. As with previous Golden Age series airplanes from Rage RC, the 3-in-1 control board arrives factory-installed with proportional servos for rudder and elevator control. The updated 2.4GHz transmitter features improved gimbals for enhanced flight control feel, and the 250mAh high-capacity battery and separate 300mAh USB charger combine to provide long flight times and fast charges, maximizing your time in the air. All you need to add are 4 AA batteries to power the transmitter and you can be making your maiden flight on this highly detailed, historic airplane within minutes of opening the box!

Specifications:

• Wingspan: 22.2 in (565mm)
• Length: 16.0 in (405mm)
• Wing Area: 75.95 sq. in. (4.9 sq. dm.)
• Weight with Battery: 2.1 oz (60 g)
• Battery: 250mAh 60C 1S 3.7V LiPo
• Transmitter: 4-channel 2.4GHz
• Onboard Electronics: 3-in-1 control board (receiver, servos, ESC)

BMS-M43C HV CORELESS, DIGITAL, 55.5 kg / 769.5 oz [email protected] sec ( Includes Lockable Aluminum Arm ) (SR/SXR Edition)