GT Power High Power 3W Aircraft Lighting System
Description: GT Power High Power 3W Aircraft Lighting SystemThis lighting set is the ultimate system from GT Power and contains the brightest LEDs GT Power makes. These are seriously bright high power 3 Watt LED lights. Looking at them from a meter away will leave spots in front of your eyes. Unfortunately photographs cannot demonstrate how bright and impressive these LEDs are. The kit has a High Power control board with a Power connector wire (2S-JST), mechanical wired switched, and a Signal wire (JR) that simulates actual aircraft navigation lighting. The system has been designed according to real aircraft navigation lighting standards featuring beacon, navigation and strobe lights to make your aircraft look more realistic. A great way to add a level of scale realism to your models and it is extremely easy to install. Using long life, super-bright (3 & 5mm diameter) LEDs, you will not have any trouble seeing any model they are installed in! All LEDs or LED combinations have separate plugs so they can be moved around for different lighting combinations. The system requires a 2S Lipo with a JST balance plug. The balance connector is how the system is powered and connects to the light controller board. The kit consists of eight bright LED lights, a control board with power lead, switch, and signal lead, plus clamps and zip ties for securing the LEDs to the fuselage and wings of your aircraft, as well as double-sided tape for securing the control board within the fuselage. FEATURES:
SPECIFICATIONS:
INCLUDES:
|
Bob Smith Industries Insta-Set
| Untitled Document Description:Bob Smith Industries Insta-Set Insta-Set™INSTA-SET™ is a catalyst which acts as an accelerator that allows CAs to quickly cure in thick layers by enhancing the alkaline conditions during polymerization. INSTA-SET™ in a spray bottle is normally used to cure the CA that flows from joints when parts are pressed together. Applying an additional bead of thick CA along a seam and then curing it with INSTA-SET™ significantly enhances a joint’s strength. For difficult to bond materials, INSTA-SET™ can be applied to one surface and CA to the opposite surface. When brought together, they will bond instantly. INSTA-SET™ is formulated with a strawberry scent and activates CA in 6 to 8 seconds without any degrading of the CAs strength, which can occur with many other accelerators. It is compatible with all surfaces, even clear plastic and white foam.
Directions: After joining parts with cyanoacrylate (CA, super glue), spray the seams with Insta-Set™ to cure the CA in 8 seconds. A bead of CA can then be applied to the outside and corners of joints before another application of Insta-Set™ to reinforce their strength. Insta-Set™ can also be applied to one part (with CA on the other) before joining for difficult to bond materials. Insta-Set™ is compatible with all surfaces, including clear plastic and all foams. It also is a great cleaning agent for adhesive residue and scuff marks. Store separately from CAs.
Works Best On:
Click to Download Safety Data Sheet
|
BSI-AC-151
$5.99
3-in-1 UBEC/CDI Kill Switch with Dual LED color Voltage Alarm
| Description:
|
RCCSKJ-SW-UBEC-CDI-2122
$19.95
1/24 Tetra24 K1 Portal Edition RTR Scale Mini Crawler, Root Beer
| 1/24 Tetra24 K1 Portal Edition RTR Scale Mini Crawler, Root Beer |
PHT2401RB
$139.99
