PowerBox Jet Smokepump, (High Capacity Smoke Pump)
PowerBox Jet Smokepump, (High Capacity Smoke Pump)Click Here for the Instruction Manual Quique Sommenzini has been using the system in his models for a year, and is convinced: "The best pump I've ever seen!” The PowerBox Smokepump has been developed by PowerBox-Systems specifically for pumping smoke oil in model aircraft. The mechanical system and electronics are manufactured on our own premises, and the unit's high standard of quality is evident from its long effective life: the PowerBox Smokepump is the world's most durable smoke oil pump, as has been demonstrated in several long-term tests. The mechanical pump system is assembled entirely from high-quality aluminium and brass parts. All our pumps are subjected to a running-in procedure during manufacture, ensuring that the gears mesh perfectly, and that the pump is 100% leak-free. Tight manufacturing tolerances eliminate the need for a separate cut-off valve with the PowerBox Smokepump. The electronic circuit is infinitely variable within the range 0%-100%, allowing the pilot to fine-tune the flow rate to match the exact requirements of the model. The Smokepump can be powered either by a PowerBox or a separate battery. If a separate battery is used, the electronic circuit switches to a "stand-by" mode if the receiver fails to pick up a signal. This means that it is not necessary to provide a separate switch to isolate the PowerBox Smokepump from the battery when you switch the model off. The PowerBox Smokepump is available in a Standard version and a Jet version, the later with higher throughput and twin outlets. The maximum flow rate of the Smokepump (Order No. 8010) is around 750 ml./min., while the Smokepump Jet (Order No. 8015) is capable of around 950 ml. The set includes all the necessary connecting leads and a length of heat-resistant hose. The standard set also contains a Y-piece which can be used to connect both silencers of an opposed-twin (boxer) engine. FEATURES:
SPECS:
|
Powerbox SmokePump
PowerBox Mercury SRS, with Internal iGyro, LCD, GPS & Sensor Switch
|
PowerBox Mercury SRS, with Internal iGyro, LCD, GPS & Sensor Switch |
PBS-4110
$543.50
PowerBox Evolution, with Sensor Switch & Patch Cables
PowerBox Evolution, with Sensor Switch & Patch Cables |
PBS-4230
$217.00
PowerBox Competition SR2, with Sensor Switch & TFT-Display
PowerBox Competition SR2, with Sensor Switch & Display |
PBS-4450
$474.12
PowerBox PowerExpander SRS, (Multiplex or Deans Connector)
PowerBox PowerExpander SRS, (Multiplex or Deans Connector) |
PBS-3430
$140.50
PowerBox Gemini II Power Switch, Regulated to 5.9V & 7.4V
PowerBox Gemini II Power Switch, Regulated to 5.9V & 7.4V |
PBS-3125
$136.50
HiTec 7245 MH
|
The PERFECT 30cc Dual Elevator Servo |
HS-7245 MH
$75.99
Deans (T Plug) Battery Extension Wire (12 or 16AWG)
| Deans T Plug Battery Extension Wire
Deans T Plug Battery Extension Wire
Description: Deans T Plug Female to XT90 Male Connector Adapter
|
EX-DeansBattext
$4.99
Hindenburg (Zeppelin) Static Model Wood Kit
| Hindenburg (Zeppelin) Static Model Wood Kit 31.5" EPP 3D Airplane YAK55 Features: • Kit version - Assemble and install your choice of electronics • All hardware accessories included in kit • Durable EPP material with realistic printing resemblance of a shark • Simple to build Specification: Wingspan: 800mm Length: 875mm Flying Weight: 400g Suggested Power System: Motor: 2212 1400KV ESC: 20A Servo: 9g *4 Propeller: SF 8-9inch Radio: more than 4CH BATT: 2S 1200-1500mAh (Not incl.) Different versions supplied as below: E1701=E17 YAK55 KIT+APC SF9047 E1702=E17 YAK55 KIT+Motor(2212 1400KV+3.5mm Banana Male Plug+3.0mm Prop Adapter) E1704=E17 YAK55 KIT+Motor+ESC(20A E-Power+3.5mm Banana Female Plug+XT60 Plug)+Servo(9g*4) |
DW-VS32
$79.99
