Bob Smith Industries Insta-Set
Untitled Document Description:Bob Smith Industries Insta-Set Insta-Set™INSTA-SET™ is a catalyst which acts as an accelerator that allows CAs to quickly cure in thick layers by enhancing the alkaline conditions during polymerization. INSTA-SET™ in a spray bottle is normally used to cure the CA that flows from joints when parts are pressed together. Applying an additional bead of thick CA along a seam and then curing it with INSTA-SET™ significantly enhances a joint’s strength. For difficult to bond materials, INSTA-SET™ can be applied to one surface and CA to the opposite surface. When brought together, they will bond instantly. INSTA-SET™ is formulated with a strawberry scent and activates CA in 6 to 8 seconds without any degrading of the CAs strength, which can occur with many other accelerators. It is compatible with all surfaces, even clear plastic and white foam.
Directions: After joining parts with cyanoacrylate (CA, super glue), spray the seams with Insta-Set™ to cure the CA in 8 seconds. A bead of CA can then be applied to the outside and corners of joints before another application of Insta-Set™ to reinforce their strength. Insta-Set™ can also be applied to one part (with CA on the other) before joining for difficult to bond materials. Insta-Set™ is compatible with all surfaces, including clear plastic and all foams. It also is a great cleaning agent for adhesive residue and scuff marks. Store separately from CAs.
Works Best On:
Click to Download Safety Data Sheet
|
Muffler Extensions, Exhaust Tubes (Fits DLE and other engines)
DLE Muffler Extensions Choose from 5 sizes! FORMAT: LxW (width is inside diameter) A: 63x15 mm : DLE 20RA B: 64x17 mm : DLE 35RA/40 C: 78x20 mm : DLE 55RA D: 96x25 mm : DLE 55, DLE 111, DLE 120 E: 121x31 mm : DLE 61, DLE 85 *Sold individually- if you have a twin engine, you will need two extensions *Each Hose extension comes with a metal clamp to tightly secure it to the muffler.
|
DLParts-
$6.99
Bob Smith Industries Maxi-Cure Exra Thick CA
Untitled Document Description:Bob Smith Industries CA Glue Maxi-Cure™ Super Glue, CAMaxi-Cure™ extra thick CA is the best CA for most plastics, including GE’s Lexan MAXI-CURE™ is the best choice for plastic model assembly. When used with INSTA-SET™, it works better than any putty for modifying or filling voids. It can be carved with a knife or razor blade and sanded and feathered to form a finish indistinguishable from plastic. MAXI-CURE™ bonds fiberglass, hardwood, metal and rubber better than any other hobby adhesive. For gluing to the inside, clothtextured surface of fiberglass, scrape the area to be bonded with a razor blade or coarse sandpaper before using MAXI-CURE™ or any other adhesive. It also is best for bonding the tires for R/C cars. Directions:Unscrew top from nozzle. For finer applications, use the extender tip. Apply Maxi-Cure™ CA to one side of the parts being joined, then hold them tightly to- gether for 10-20 seconds. For larger bonding areas, apply serpentine beads of the CA with enough spacing to allow for the spreading of the adhesive. Insta-Set™ accelerator can be sprayed to cure the CA that oozes from joints. Full strength is reached in three hours. Wipe the nozzle clean before replacing screw-on top. Refrigerate to extend shelf life. Cured CA is stable from -40 to 220° F. Soak extender tip in acetone for cleaning.
Works Best On:
Works Good On:
|
BSI-CA-56b908cabf5a5
$4.99
Dubro 5/32" ID Tygon Gasoline/Diesel Fuel Tubing 3'
Dubro 5/32" ID Tygon Gasoline/Diesel Fuel Tubing 3' |
DUB554
$7.75