RCEXL Universal On Board Glow System Methanol Engine Ignition With LED Indicator

Contact UsCustomer Reviews

RCEXL Universal On Board Glow System Methanol Engine Ignition With LED Indicator

Our Price:

$21.99


Quantity

OUT OF STOCK


Availability No items available
Weight 0.20 lbs
SKU Rcexl-Glow-igniter-2214
Manufacturer RCEXL

RCEXL Universal On Board Glow System Methanol Engine Ignition With LED Indicator

Features:

  • RCEXL on board glow system, can be controlled by hand or TX remote control
  • Separate design with interanl spring lock structure that can be taken off under remote control mode to reduce weight
  • Compatible with car and airplane engines, with spring lock structure to prevent loose equipment
  • LED indicators to let you know the working state of the drive
  • Manual switch with ring type LED light for decoration
  • Small size, light weight
  • Wide range of voltage, input 4.5V~12.6V
  • Output Voltage: 1.4V (at the beginning), 0.8V (enhanced stability)

Attention:
This on board glow system does not have low voltage protection; please pay attention to the battery power (Recommend 2S liPo battery)
Chinese made HSP ignition is not supported.

English Manual, Click Here

Package Includes:

1x RCEXL Universal On Board Glow System 

: *
: *
: *
 

Bob Smith Industries 301 Extender Tips for CA Glue Bottles (6 Pack)

Bob Smith Industries 301 Extender Tips for CA Glue Bottles (6 Pack)

UN-CURE™ debonder will soften cured CA. If parts are bonded incorrectly or your fingers are stuck together, a few drops of UN-CURE™ will dissolve the CA in about a minute. Apply on bonded skin and roll apart fingers. Once stuck, use acetone to clean off softened CA, then wash off with soap and water. Since cured CA is essentially acrylic plastic, anything that will dissolve CA will also soften most plastics. Care must be used, therefore, when using Un-Cure on plastics. Separating plastics parts with a razor saw is usually the best option. Un-Cure™ will soften cured super glue (aka cyanoacrylate, CA). To release bonded skin (not near the eyes) apply Un-Cure™, then use a small, rounded object like a paperclip to separate the skin with a peeling action, applying more Un-Cure™ as needed until the skin areas are debonded. Wash the area with soap and water. The natural shedding of the skin’s outer layer will remove any residual CA within 12 hr. For removing CA from hard surfaces, soak a cloth or paper towel in Un-Cure™ and rub areas vigorously. Un-Cure™, however, will mar most plastics.

 

Works Best On:

  • All Cyanoacrylates

 

Avaliable in 1 oz Size.

 

 

Click to Download Safety Data Sheet

BSI-301

$2.99

Thunderstruck Stunt Kite- Black

Thunderstruck Stunt Kite- Rainbow

HRP-SKK20422

$59.99

Power HD A-50 HV Coreless High Torque 50.0 kg/ 694.4 oz 0.16 sec 8.4V (Programmable, for 30-200CC Airplane or Jet)

Power HD A50 Coreless HV High Torque 50.0 kg/ 694.4 oz 0.16 sec 8.4V (Programmable, for 30-200CC Airplane or Jet)

Thought our other servos were great? Well of course they are! But wait until you check out these new Power HD servos - they will rock your wheel pants off* (no wheel pants will be harmed by using this product - but you get the idea).

There's a storm brewing in Redwing RC! These new HD Storms can handle anything thrown at them. Now, we can't imagine your servos heading into battle facing a hurricane or tornado - but they sure behave as if they have fought and conquered the fiercest of storms - taking all of that power and knowledge with them when they are installed into your bird. Rain or shine, these servos are ready for anything!

The HD Storm 3s are high efficiency and perform better. They run cooler and quieter and with less vibration - because there are no brush arcings, the radio frequency interference and electronic noise is significantly reduced.

All aluminum housing, high voltage and the new brushless technology gives you the best strength and speed while being incredibly efficient and long lasting.

New and Improved Technology!

The Power HD Storm 3 high voltage servos are made with brushless technology. Now - we've heard about this "brushless" stuff before but it is time to ask the question on all of our minds - why is that so great? Take a brushless motor for example - no brushes in a brushless motor (no kidding...) nor does it have the commutator - instead a small circuit board coordinates the energy delivery to the windings. Think about this technology being used in a power tool - since the electronics communicate directly with the stationary windings the tool can adapt to its surroundings - only using enough juice necessary to accomplish the job. So if you are using a brushless drill to drive a screw into Styrofoam - it will sense the lack of resistance from the foam and pulls only enough charge from the battery that it needs. Whereas a brushed drill will run as fast and hard as it can no matter the job simultaneously wasting your battery life.

"What the heck does that have to do with my servo?" Well now they are incorporating that smart technology into these HD Storm 3 high voltage servos - so they are not going to be sucking the life of your Redwing LiFe battery when it doesn't have to - which means not only would you be getting a great and powerful servo - it's smart! Your "LiFe" will thank you.

Perfect for Giant Scale/3D planes and 1/5 Buggy/Crawler! So now the only question is - why are you still reading this? Go buy your Power HD Storm 3 servos before they're gone!

Specs:

  • Torque:
    • 374.9 oz/in at 6V (27.0 kg/cm)
    • 444.4 oz/in at 7.4V (32.0 kg/cm)
       
  • Speed:
    • .14 sec at 6VV
    • .11 sec at 7.4V
       
  • Voltage: 6.0 ~ 8.4 V
  • Weight: 2.82 oz (80g)
  • Size: 1.57 x 0.79 x 1.53 in (40.0 x 20.0 x 38.0mm)
     
  • Operating Temp- -20~60centigrade
  • Working Frequency - 1520μs / 333hz
  • BRUSHLESS Motor
  • Double Ball Bearings
  • Titanium and Steel gears
  • Water resistant O-Rings

 

HD-A50

$89.99