APC 24 x 12 Electric Prop

Carbon Fiber Landing Gears for EPP Planes

Available in two styles to fit the Future Model MX2, Yak55, Sbach, and Katana

Dimensions (match the below information to the inset photo)

• MX2 Style
• A=85mm
• B=135mm
• C=20mm taper to 10mm
• D=20mm
• E=250mm

• Yak Style
• A=65mm
• B=140mm
• C=20mm taper to 10mm
• D=20mm
• E=255mm

The Yak style gear will work for the Future Model Sbach and the MX2 style gear will work for the Katana.

Cross RC MC6 1/10 6x4 Military Truck Kit

Paraboard Parallel Charging Board for Lipo /XT60 Connector

This Paraboard lets you charge and balance up to six lipo batteries at once! This board features Traxxas connectors for your batteries' main leads and JST-XH balance plugs ranging from 2S to 6S. They plug right into most popular models of 6S lipo balancing chargers that have 7-pin balance ports with 2.5mm pin spacing.

To get the most out of your Paraboard, pick up one of our GT-400 chargers. It provides 400W of total charging power and charge rates of up to 20 amps! This paraboard has a maximum charge rate of 30 amps.

Battery packs must be of the same cell count (only charge 2S with 2S, 3S with 3S, etc.) and battery voltages must be within 0.1V per cell (0.1V for 1S, 0.2V for 2S, etc.) of all other batteries connected to the Paraboard at the same time. Use a Cell Spy or similar voltage tester to check the voltage of each cell before connecting to the Paraboard.