CESSNA 170 NIGHT PNP (Tow/Float/Trainer/Acrobatic)

Contact UsCustomer Reviews

CESSNA 170 NIGHT PNP (Tow/Float/Trainer/Acrobatic)

Our Price:

$549.99

Floats
Battery
Quantity (1)

Availability 1 in stock
Weight 80.00 lbs
SKU CESSNA-170-NIGHT-PNP

CESSNA 170 NIGHT PNP--Last One...does not include Flight Control System

The Premier Aircraft Cessna 170 is the evolution and accumulation of many years of design experience offering something for everyone. At its core, it is a forgiving general aviation aircraft with rough field capabilities. If desired, it also has the ability to kick up the power and offer a surprising level of aerobatic capability. It offers a perfectly balanced air-frame design combined with the included Aura 8, today’s most Advanced Flight Control System, yielding an unmatched flying experience. Pilots will feel smooth, predictable and precise aircraft control without any interference to pilot inputs. The aircraft's extremely light, yet rigid air-frame will offer forgiving yet responsive flying characteristics! The Cessna 170 structure is hollow on the inside and has carbon fiber in key locations and the unique forward plywood structure secures the power system and makes it run very smooth, even at high power. Because it is EPO foam, it remains TOUGH and REPAIRABLE.

The Aura 8 programming capability allows the pilot total freedom to adjust all settings, including the flight modes (sensor control inputs can even can be switched off). The USB firmware update capability will allow you to benefit from the latest features and advancements without purchasing new equipment!

This Night Version has an array of factory installed LED's and an LED controller for an awesome night flying experience. The Fuselage, Wing, and Fin Glow due to internally mounted LED's. The Stab is illuminated by LED's mounted on the Fin. The Navigation lights remain, further adding to the effect. Float customers should note that all of the floats are night equipped and glow when coupled with the night Cessna!

The Cessna 170 can accept a range of options, including floats for flying off of water and snow skis! The mechanism for glider towing is also included. While the aircraft excels at slow speed and back-country style flying including short takeoffs and landings from unimproved runways, this version is engineered to offer even more. If desired, the pilot can increase the voltage of the battery, and load a more extreme configuration into the Aura Flight Controller and take the flying to a whole new 'extreme' level! 

NIGHT FEATURES!

  • Internal super-bright LED's in the Fuselage, Wing and Fin for a GLOWING effect!
  • Fin Mounted LED's for recognition and Stab illumination.
  • Scale Navigation and Landing LED's remain for added ease of orientation.
  • LIght Controller provides several illumination effects and support the night floats

FEATURES INCLUDED!

  • Scale lines and details to bring the majesty of scale looks with an unreal flying experience!
  • Innovative plywood sub-frame connects the motor securely to the fuselage while providing superior battery mounting and cooling
  • Hollow wing with internal wood and carbon structure
  • Light wing loading for easy handling
  • Large flaps for stunning short take-offs and landings
  • Large control surfaces for excellent maneuverability
  • Vortex generators for low speed control
  • Extra-large tundra tires for flying off of unimproved fields
  • Glider Towing mechanism installed (requires servo not included)
  • Scale navigation lights Installed
  • 33g metal gear digital servos for ailerons, elevators, and rudder
  • 19g full metal gear digital servos installed on the flaps
  • Powerful all metal 60 size motor with optimized Kv
  • 80A HobbyWing BL motor controller with separate 5V/8A SBEC
  • 16 x 6" custom tooled Somenzini-Ribbe (SR) Prop for awesome grip at all speeds
  • Float-ready air-frame for easy addition of optional floats
  • Custom control horns for optimized throw and precision
  • Factory applied trim scheme
  • Huge battery compartment for easy access
  • Accepts a wide range of batteries while offering a range of different performance levels

Specifications:

  • Length: 60.1" (1544mm)
  • Wingspan: 86.7" (2204mm)
  • Weight: 9 lbs 2 oz (4310g) with 6S-4000mAh 
  • Wing Area: 1094 sq. in (70.6 sq. dm)
  • Channels: 4-6
  • Battery: 3200 4S-5000 6S (higher voltage can be used for more extreme flying)

$70 Flat Shipping lower US only--contact us at [email protected] to calculate international shipping cost

: *
: *
: *
 

XQ 4013 digital 6v

Description:
The XQ 4013 servo is the best option out there for 30cc sized 3d planes. Perfect combination of speed and torque and a price point that make the other servo companies jealous.

The XQ 4013 has superior reliability to other servos. They have a core less digital motor, for precise strong movement. The XQ 4013 has all titanium gears, heat sink to reduce overheating, waterproof housing, and great torque and speed.

The XQ 4013 is perfect for a 30CC 3D plane for ALL surfaces. They can be used reliably in a 50cc plane also on all surfaces.

Specifications:

  • Torque:
    • 166.7 oz/in at 4.8V (12.0 kg/cm)
    • 197.2 oz/in at 6V (12.8 kg/cm)
       
  • Speed:
    • .13 sec at 4.8V
    • .11 sec at 6V
       
  • Voltage: 4.8V - 6V
  • Weight: 2 oz (59g)
  • Size: 40x20x39mm
     
  • Gear Style: Futaba Arms
  • Modulation: Coreless Digital
  • Gear Type: Titanium
  • Weight: 2oz (59g)
  • Size: 40x20x39mm




Watch this video of the XQ 4013 beating the Hitec 7985mg

Features:

  • Titanium Gears
  • Waterproof
  • Coreless
  • Digital
  • High Torque/High Speed
  • Smooth resolution


Don't forget to buy some circle servo arms to fit your carbon fiber arms you got in your kit!

 

X-4013

$42.50

DLE 35RA Engine

+ Free Shipping (Continental US only!) If international customer, please contact us for shipping quote. You will be charged separately for shipping.
+ Free 2 Year warranty

 

 

Description:
High performance in a compact package!

The DLE-35RA features a rear exhaust for the perfect tuned pipe setup. It also includes a newly designed piston with re-engineered skirt for less piston weight - resulting in such advantages as awesome throttle response, more power and longer engine life. Producing 400 more rpm than the DLE30, the DLE-35RA comes with engine standoffs, electronic ignition, spark plug and muffler.


Download DLE 35RA Mounting Template
Download DLE 35RA Manual Coming Soon


Specifications:

  • Displacement: 34.9 cc (2.13 cu in)
  • Bore: 1.5 in (38.5 mm)
  • Stroke: 1.17 in (35RA mm)
  • Weight: 2.6 lb (42oz)
  • RPM Range: 1,600-8,500
  • Output: 4.1 hp @ 8,500 rpm
  • Requires: unleaded gasoline, oil, ignition battery & propeller
  • Includes: muffler, spark plug, gasket, bolts, machined aluminum standoffs, throttle arm extension
  • Suggested Propellers: 18x6, 18x8, 19x6, 19x8, 20x8, 20x6
  • Suggested Break-in Prop: 18x6
  • Ignition Battery: 4.8-6.0V NiCd or NiMH, 6.6V LiFe or 7.4V LiPo pack (LiPo use requires voltage regulator.)
  • Compression Ratio: 7.6:1
  • Gas/Oil Mix: Break in with Lawn Boy(or similar non synthetic oil) at 32:1 Ratio per gallon / Use RedLine oil at 50:1 for long term use after break in.
  • Replacement Spark Plug: NGK CM6 (DLEG5510) or equivalent
  • Weight Breakdown: Engine: 32.1 oz (910 g); Muffler: 2.6 oz (60 g); Ignition: 5.2 oz (120g)
  • Recommended Propeller: Redwing RC 3d Props - type 19x6 19x8 20x6 20x8 Propeller

 

 

RedwingRC Pre-Run
DLE 35ra DLE55
 

 

 

DLE-35 RA

$379.00

SmartDesign V3 "Trouble Free" Tail Wheel Assembly

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Description:

This tail wheel assembly is extremely efficient and reliable. With fewer parts, there is less to worry about and the solid construction makes it the go-to choice for pilots at any skill level. The new V2 design incorporates ball bearings for smooth motion, ball-joint to rudder steering connection, wider CF mounting plate, and slightly larger wheels that the v1. "Trouble Free" means just that... no more worrying about screws falling out or loss of control. Make the switch today by installing the SmartDesign Tail Wheel!!!

CNC Aluminum & C.F. Tail Wheel Assembly for 20cc to 220cc

 


 

Features:

 

  • Extremely Reliable
  • Mechanically Efficient Design
  • Simple and Solid Construction
  • Fewer parts needed for install
  • Ball Bearings

 

Pricing

 

  • 20-40cc: $27.00
  • 50-70cc: $34.99
  • 85-120cc: $44.99
  • 150cc-220cc: $54.00

 

 

Weight

 

 

  • 20-40cc: 1.2 oz
  • 50-70cc: 1.6 oz
  • 85-120cc: 2.2 oz
  • 150cc-220cc: 2.6 oz

Don't forget to check out our Aluminum Hub Wheels! They are excellent replacements for landing gears and tail wheels. Please see sizing chart below.

Tail Wheel Chart

GW-KAGC-112

$54.99