RedwingRC Accessories

Power Board - PRO SERIES - Black (4106)

All NEW 4000 SERIES! *with Digital Readout and Touch-button programming.

Description:

Completely redesigned from the ground up, with these new Power Boards you are able to use 2 batteries with redundancy to avoid possible crashes from battery failure. Simply plug in your batteries with XT-60 style connectors to this Power Board Expander (Our LiFe batteries are perfect for this) and you now have 2 batteries working in tandem to supply your servos AND ignition.

These new versions offer SEVERAL new features:
1) Digital read out on all models - displaying voltage going IN and OUT of all devices (see photo)
2) LED and audible alarm for all models that you can set to warn when your system drops below a voltage of your choosing
3) TOUCH button programming to select your warning voltage
4) Wires to your RX are PRE-installed
5) Enclosed lightweight and strong plastic housing
6) XT-60 Connectors

The Power Board board electronically isolates the batteries from each other so that there is no interference possible from your ignition. It also regulates the voltage down to an ideal voltage to your RX (5v) and then is select-able to your servos (yellow and black units only - the red unit offers the same voltage as your batteries to the servos).

You can Plug in, up to 8 servos into the board (12 servos with the Black Power Board), which has 2 outputs for EACH channel, effectively DOUBLING the number of servos you can use in a plane ( a total of 16 output channels) without reducing the amperage (that a Y cable would cause).

These Power Boards also features LED lights to give you clear indication that your batteries are connected and working properly, as well as voltage etc.

They feature a mounting space in the middle to mount your RX and also include mounting hardware to mount it securely to your plane.

Watch this video for an overview of the different versions

View this video for a full explanation on how to use these power boards

Features:

Black Power Board (4106)

Dual battery redundancy for safer flying
LCD display which shows real time info of your in and out voltages
Built in regulator that supplies a clean 5v to your receiver
Integrated CDI remote cut off switch to kill your engine (OPTO KILL)
8 channels in, 16 channels out (+ ignition)
Electronically isolated for interference free flying
Adjustable voltage selection to your servos via the dial on the side (from 4.8v to 9.7)
Ability to use High voltage servos while providing a clean 5v to your RX
Battery balancing (draws extremely evenly from your dual battery set up)
Short Circuit protection (in the unlikely event of a short it will protect from battery drain)

(input voltage MUST be between 6-13v. A 4S Life would be ideal)

Specs:

Black Power Board (4106)

Input Voltage: 6-13v
Working load: 0A to 30A
Weight: 4.5 oz.
Dimensions: 4.5"x2.5"x5/8"
Working Temperature: -20c to -85c

Recommended Set ups: Use the Black Power Board for 50cc to 100cc or bigger.

PB-4106

$169.00 169.00

Power Board - PRO SERIES - Red (4104)

All NEW 4000 SERIES! *with Digital Readout and Touch-button programming.

Description:

Completely redesigned from the ground up, with these new Power Boards you are able to use 2 batteries with redundancy to avoid possible crashes from battery failure. Simply plug in your batteries with XT-60 style connectors to this Power Board Expander (Our LiFe batteries are perfect for this) and you now have 2 batteries working in tandem to supply your servos AND ignition.

These new versions offer SEVERAL new features:
1) Digital read out on all models - displaying voltage going IN and OUT of all devices (see photo)
2) LED and audible alarm for all models that you can set to warn when your system drops below a voltage of your choosing
3) TOUCH button programming to select your warning voltage
4) Wires to your RX are PRE-installed
5) Enclosed lightweight and strong plastic housing
6) XT-60 Connectors

The Power Board board electronically isolates the batteries from each other so that there is no interference possible from your ignition. It also regulates the voltage down to an ideal voltage to your RX (5v) and then is select-able to your servos (yellow and black units only - the red unit offers the same voltage as your batteries to the servos).

You can Plug in, up to 8 servos into the board (12 servos with the Black Power Board), which has 2 outputs for EACH channel, effectively DOUBLING the number of servos you can use in a plane ( a total of 16 output channels) without reducing the amperage (that a Y cable would cause).

These Power Boards also features LED lights to give you clear indication that your batteries are connected and working properly, as well as voltage etc.

They feature a mounting space in the middle to mount your RX and also include mounting hardware to mount it securely to your plane.

Watch this video for an overview of the different versions

View this video for a full explanation on how to use these power boards

Features:

Red Power Board (4104)

Dual battery redundancy for safer flying
LCD display which shows real time info of your in and out voltages
Built in regulator that supplies a clean 5v to your receiver
Integrated CDI remote cut off switch to kill your engine (OPTO KILL)
8 channels in, 16 channels out (+ ignition)
Electronically isolated for interference free flying

(We recommend our LiFe batteries and 6v servos with this unit - be sure to select ones with XT connectors for this use)

Specs:

Red Power Board (4104)

Input Voltage: 5-13v
Working load: 0A to 20A
Weight: 3 oz.
Dimensions: 4.5"x2.5"x5/8"
Working Temperature: -20c to -85c

Recommended Set ups: Use the Red Power Board for 30-50cc planes using 6v servos. Use 2 LiFe batteries, and "jump" power down from an open servo port on the board, to run to your ignition

PB-4104

$139.00 139.00

Power Board - PRO SERIES - Yellow (4105)

All NEW 4000 SERIES! *with Digital Readout and Touch-button programming.

Description:

Completely redesigned from the ground up, with these new Power Boards you are able to use 2 batteries with redundancy to avoid possible crashes from battery failure. Simply plug in your batteries with XT-60 style connectors to this Power Board Expander (Our LiFe batteries are perfect for this) and you now have 2 batteries working in tandem to supply your servos AND ignition.

These new versions offer SEVERAL new features:
1) Digital read out on all models - displaying voltage going IN and OUT of all devices (see photo)
2) LED and audible alarm for all models that you can set to warn when your system drops below a voltage of your choosing
3) TOUCH button programming to select your warning voltage
4) Wires to your RX are PRE-installed
5) Enclosed lightweight and strong plastic housing
6) XT-60 Connectors

The Power Board board electronically isolates the batteries from each other so that there is no interference possible from your ignition. It also regulates the voltage down to an ideal voltage to your RX (5v) and then is select-able to your servos (yellow and black units only - the red unit offers the same voltage as your batteries to the servos).

You can Plug in, up to 8 servos into the board (12 servos with the Black Power Board), which has 2 outputs for EACH channel, effectively DOUBLING the number of servos you can use in a plane ( a total of 16 output channels) without reducing the amperage (that a Y cable would cause).

These Power Boards also features LED lights to give you clear indication that your batteries are connected and working properly, as well as voltage etc.

They feature a mounting space in the middle to mount your RX and also include mounting hardware to mount it securely to your plane.

Watch this video for an overview of the different versions

View this video for a full explanation on how to use these power boards

Features:

Yellow Power Board (4105)

Dual battery redundancy for safer flying
LCD display which shows real time info of your in and out voltages
Built in regulator that supplies a clean 5v to your receiver
Integrated CDI remote cut off switch to kill your engine (OPTO KILL)
8 channels in, 16 channels out (+ ignition)
Electronically isolated for interference free flying
Adjustable voltage selection to your servos via the dial on the side (from 4.8v to 9.7)
Ability to use High voltage servos while providing a clean 5v to your RX

(Please note the input voltage for this unit MUST be between 7v-13v. A 4S LiFe would be ideal)

Specs:

Yellow Power Board (4105)