HiTec D956WP High Torque, Waterproof, Steel Gear Digital Servo, 0.12sec/405oz @7.4v

Ask a question about this product

Printable version

Options

Market Price: $183.95

Our Price:

$119.99

You Save

35%

Quantity (15)

Details


Availability	15 in stock
Weight	0.38 lbs
SKU	HRC36956S
Manufacturer	Hitec

The D956WP has arrived! Based off the D954SW servo, this IP-67 rated version is the true waterproof, dust resistant upgrade for 1/10^th-scale Rock Crawlers and Off-Road Trucks. As with our entire “D” line, this technologically-advanced servo is powered by our 32-bit MCU (Microcontroller Unit) and 12-bit ADC (Analog to Digital Converter) industrial science and possess Smart Sense engineering with rapid, high resolution response. The unprecedented programmability and wide-voltage capabilities deliver the most progressive, leading-edge performance for all your radio control needs. With incredibly durable steel gears, dual ball bearing and hardened steel output shaft, the high-end performing D956WP produces the mighty torque and reliability required to take bashers to the next level.

FEATURES

Programmable PWM Digital Amplifier
32-Bit MCU with 12-Bit ADC Circuitry
4096 Resolution
1M Cycle Long Life Potentiometer
Wide Operating Voltage (4.8 ~ 8.4 Volts DC)
Dual Ball Bearing Supported Output Shaft
25-Tooth Output Spline
Coreless Metal Brush Motors
Nylon Reinforced Plastic Upper and Lower Case
Diamond Cut Aluminum Heat Sink Center Case
Water Resistant and Waterproof Proof Case

PROGRAMMABLE FUNCTIONS

End Point Adjustments
Direction
Fail Safe
Dead Band
Speed (Slower)
Soft Start Rate
Overload Protection
Data Save / Load
Program Reset

ACCESSORIES

3 Steel Alloy Gears Set | Link |
Metal / Karbonite 1st Gear Set | Link |
Plastic / Aluminum Case Set | Link |
Applicable Horns & Screws

D956WP SERVO SPECIFICATIONS

Performance Specifications
Operating Voltage Range (Volts DC)	4.8V ~ 7.4V
Speed (Second @ 60°)	0.19 ~ 0.12
Maximum Torque Range oz. / in.	251 ~ 405
Maximum Torque Range kg. / cm.	18.0 ~ 29.0
Current Draw at Idle	30 mA
No Load Operating Current Draw	500 mA
Stall Current Draw	5,200 mA
Dead Band Width	1 µs
Physical Specifications
Dimensions (Inches)	1.57 x 0.78 x 1.46
Dimensions (Metric)	40.0 x 20.0 x 37.0
Weight (Ounces)	2.40
Weight (Gram)	68.0
Circuit Type	32bit Programable Digital
Motor Type	Coreless Metal Brush
Gear Material	MK 1st Gear & 3 Steel Alloy Gears
Bearing Type	Dual Ball Bearing
Output Shaft (type / Ømm)	H25T
Case Material	Plastic / Aluminum
Dust / Water Resistance	IP67 Rating
Connector Gauge (AWG) / Strand Count	20 / 80
Radio Control Applications
Parkflyer	N / A
Sport Plane	30 - 40%
Sailplane	2 meters and up
3D Performance	30 - 40%
Scale	30 - 40%
Electric Helicopter	N / A
Gas Helicopter	N / A
On Road	1/8th
Monster Truck	1/8th
Buggies	1/8th
Truggies	1/8th
Short Course / Truck	1/8th
Crawlers	1/8th
Sail Boat	= >1M & Scale
Power Boat	N/A

Miracle RC Aluminum Spinners (Spinner)

Description:

All NEW design! These Miracle aluminum spinners have back plates which have extensive lightening, the spinners are cut for a large 3d style prop, and the back plates are drilled for multiple engine sizes!

FOR ENGINE SIZE:

2.5" Spinner : DLE 20, Enya FS120, All YS Four Strokes and any that match these
2.5" Spinner : DLE 20, Enya FS120, All YS Four Strokes and any that match these
3" Spinner: DLE 30, DLE 35RA, DLE 55, DLE 55RA, MLD 28, DA 50, 56, 58, and EVO 54 (and any other engines that fit these templates
3.5" DLE 30, DLE 35RA, DLE 55, DLE 55RA, MLD 28, DA 50, 56, 58, and EVO 54 (and any other engines that fit these templates

SPECS:
2.5": Height 2.7", weight 2.7oz, includes 30mm bolt.
3": Height - 3.1", weight 3.2 oz, includes 55mm bolt.
3.5" : Height 3.7", weight 3.6oz, includes 60mm bolt.

Miracle RC Aluminum Spinners are high quality CNC Machined spinners. Very light, with a lightened back plate included. Very accurate, very beautiful, and a great value!