Miracle Brushless Smoke Pump
Miracle Brushless Smoke Pump made by DualskyIntroducing the new Miracle Brushless Motor Smoke Pump made by Dualsky! These light weight pumps (only 3.1 oz) have a CNC processed 6061 case with a Japanese high speed oil seal. The powerful Outrunner Brushless Motor with carbon composite gear pump supplies 1330PPM @8.0v of flow to provide a great smoke show for any Giant Scale Gasser or Jet! This pump is designed to run off any 2-cell Lipo and can easily be used with programmable and non-programmable radios on any set up with an open channel. Radio Set up:Non programmable Radios Use a switched channel to switch the Smoke pump on and off. Since there is no trim control on a switched channel, the flow rate is consistent. When the switch is on, flow will be at maximum. You can set the END POINT/ATV of the radio switch channel to control the maximum flow rate to control the smoke density. Programmable Radios Plug the smoke signal wire into a spare channel (such as the 8th channel). Set this channel program mixing like the Throttle channel, then set a switch for programming mixing on/off to control smoke pump on/off. Adjust the END POINT/Travel of this channel to control smoke pump flow rate to control the smoke density. For more detailed information please see your radio manual. Specifications:
You will need a smoke tank, and smoke muffler (coming soon). **Color may vary **DO NOT dry run pump! This may cause failure and will void warranty.*
|
Servo Extensions 22AWG and 20AWG
| High quality 22AWG wire, twisted silicone wire extensions. JR type connections, so they will plug into any receiver/switch, and most servos (Hitec/JR/PowerHD/etc etc....futaba you would have to trim the edge off).
|
EX
$2.50
Falcon Carbon Fiber Props
|
Description:
|
FLC-
$56.00
MPX Triple Servo Harness 12" Male 12" Female (3 Channels 1 Plug) 20 AWG
|
Description:
|
MPX-Triple-12/12
$18.99
