RedwingRC Accessories

Fourtitude V2 Smoke Tanks 32oz

Ask a question about this product

Printable version

Options

Our Price:

$25.99

Quantity

OUT OF STOCK

Notify me when back in stock

Details


Availability	No items available
Weight	0.35 lbs
SKU	FORS2232

32oz Smoke Tank

Take the guesswork and worry out of properly setting up your aircrafts smoke system with these ready to use 4titude smoke tanks. Just strap it in and fly!

Features:

Crystal Clear allowing quick visual checks of any possible pollutants in your smoke tank.
Lightest weight commercially available R/C smoke tank on the market. Many cases less than half the weight of the older roto molded “standard” tanks.
Aerospace Mil spec sealant used in assembly to assure the tank will hold up to many high G loaded flights!
Incredibly resilient and truly seamless tank body with a threaded on closure
No rubber stopper to crack, leak, or split your tank apart.
Detailed installation instructions.

Fourtitude R/C RTU Smoke tanks include: A high quality double sided hook and loop mounting strap, precut to shape foam mounting pad, and Fourtitude R/C blue fuel line to plumb your aircraft. Everything you need to get smoking up the sky ASAP!

These crystal clear plastic tanks are square shaped which makes mounting into your aircraft very simple. Every tank is QC pressure leak tested.

Specifications:

32 ounce (946 ML) - Length 8 7/8” x Width 3” x Height 3” ( 225.5 x 76 x 76 mm) Weight 2.25 ounces

Perfect for 100-120cc size aircraft smoke systems.

Bob Smith Industries Insta-Cure+ Gap Filling CA

Untitled Document

Description:

Bob Smith Industries CA Glue

Insta-Cure+™ Super Glue, CA

Insta-Cure+™ is a higher viscosity CA for loose fitting joints in which the adhesive must bridge gaps. Normally, the thicker CA is applied to one surface and then the parts are held tightly together for about 5 to 15 seconds. For large surface areas, including those with close fitting joints such as laminations, INSTA-CURE+ ™ should also be used. To prevent premature curing, don’t spread the glue into a thin film. Lay down a serpentine bead with about 1" separations on one surface, then assemble the parts, letting the pressure spread the CA out.

Directions:

Unscrew top from nozzle. For finer applications, use the extender tip. Apply Insta-Cure+™ CA to one side of the parts being joined, then hold them tightly together for 5-15 seconds. For larger bonding areas, apply serpentine beads of the CA with enough spacing to allow for the spreading of the adhesive. Insta-Set™ accelerator can be sprayed to cure the CA that oozes from joints. Full strength is reached in three hours. Wipe the nozzle clean before replacing screw-on top. Refrigerate to extend shelf life. Cured CA is stable from -40 to 220° F. Soak extender tip in acetone for cleaning

Works Best On:

Balsa Wood
Soft Wood

Works Good On:

Hard Wood
Glass & Metals
Fiberglass
Ceramics
Hard Plastics
Rubber
Laminating
Water-Resistant
Reinforcing

Avaliable in 2oz and 3/4 Pocket Size.

Pocket CAs feature a new top that has a pin built into the cap that covers the nozzle. This pin seals the bottle so that if it is tipped over, the bottle will not leak. This makes the Pocket CAs ideal for keeping in your tool or field box, just like our IC-Gel. One disadvantage that the new Pocket CA top has is the bluntness of the nozzle. This makes it more difficult to apply small amounts of the CA, especially in tight places. From the feedback we have received, it appears about 25-30% of users prefer the new Pocket CA top, which means that over 70% prefer our standard top for general bonding purposes. Most users are buying both types. Our original top for the workshop, and the Pocket CA for use out in the field. The 3/4 oz. Pocket CAs are available in BSI's Insta-Cure, Insta-Cure+, Maxi-Cure and Super-Gold+. BSI's new extender tip #304 works on the Pocket CA.

Click to Download Safety Data Sheet

BSI-CA-56b908caadc59

$4.99 4.99