Loadstar II Model Rocket Kit, Skill Level 2

Description:
The HS-7985MG is a very high quality servo and perfect for 50cc (even for the rudder). Great in a 30cc but maybe overkill. It is fully programmable using Hi Tec's programmer. The combination of torque, speed, price and extreme holding power make it a favorite among pilots. new premium high speed HS-7985MG Digital Servo has the added benefit of our new G2 second generation programmable digital circuit. This circuit has twice the resolution of our original circuit while adding programmable overload protection. The technology does not stop at the circuit board, with high performance coreless motors, dual ball bearings, bushing supported gear shafts, dual ball bearing output shaft and our Heavy Duty Metal gear train the HS-7985MG will give you everything you need no matter what the demand.



Specifications:

• Torque:
  • 144 oz/in at 4.8V (10.4 kg/cm)
  • 172 oz/in at 6V (12.4 kg/cm)
     
• Speed:
  • .16 sec at 4.8V
  • .13 sec at 6V
     
• Voltage: 4.8V - 6V
• Weight: 2.18oz (62g)
• Size: 1.57" x 0.78"x 1.45 in (40 x 20 x 37 mm)
   
• Control System: +Pulse Width Control 1500usec Neutral
• Required Pulse: 4.8-6.0 Volt Peak to Peak Square Wave
• Operating Voltage Range: 4.8-6.0 Volts
• Operating Temperature Range: -20° to +60° C (-4°F to +140°F)
• Stall Torque (4.8V): 144oz/in. (10.4 kg/cm)
• Stall Torque (6.0V): oz/in. (12.4 kg/cm)
• Operating Angle: 45 Deg. one side pulse traveling 400usec
• 360 Modifiable: Yes
• Direction: Clockwise/Pulse Traveling 1500 to 1900usec
• Idle Current Drain (4.8V): 3mA at stop
• Idle Current Drain (6.0V): 3mA at stop
• Current Drain (4.8V): 200mA/idle and 2.0 amps at lock/stall
• Current Drain (6.0V): 240mA/idle and 3.0 amps at lock/stall
• Dead Band Width: 2usec
• Motor Type: Coreless Carbon Brush
• Potentiometer Drive: 6 Slider Indirect Drive
• Bearing Type: Dual Ball Bearing MR106
• Gear Type: 3 Metal, 1 Metal Karbonite Gear
• Connector Wire Length: 7" (178mm)

Replacement canopies for our 30cc "Strong Design" Edge 540! Following the success of our 20cc Profile Edge 540, we decided it was time for a full fuse version and has been equally well received! 

The 20cc Edge 540 is known for its unsurpassed stability in high alpha and this 30cc version is no different. The RedwingRC 30cc Edge 540 was specifically designed by Adam Strong to take advantage of the scale plane's tendencies, with focus on you expect of a modern day RC plane. Prepare to be amazed!

Click Here to see the 30cc Edge

Just like the plane, these canopies are available in 3 color schemes.

Replacement canopies for our 30cc planes can be made to order if we do not have them stock. The standard price shown is for a canopy to be produced at the time of order and air-freighted as quickly as possible from the factory direct. This allows for a more custom match to your plane and the most economical method of production. We will contact you with any questions about the batch number of your plane to make sure we get an ideal fit for you. The complete process from time of order will take about 4-6 weeks.

Contact us with any questions and to determine availability.

Please enter plane and color scheme in info box above. To be sure we are ordering the correct canopy please list all measurements where canopy touches the fuse.

Air Freight EMS direct to you: $49

MILES M.2H HAWK MAJOR Scale Vintage Racer/Trainer (Giant Wingspan 97.6" 2480mm)