Team Associated DR10 RTR Brushless Drag Race Car Combo w/2.4GHz Radio, DVC, Battery & Charger (Orange, Green or Purple)

Contact UsCustomer Reviews

Team Associated DR10 RTR Brushless Drag Race Car Combo w/2.4GHz Radio, DVC, Battery & Charger (Orange, Green or Purple)

Market Price: $549.99
Our Price:

$375.99

You Save

32%

Color
Quantity (3)

Availability 3 in stock
Weight 7.00 lbs
SKU ASC70025C-Orange

The Team Associated DR10 RTR Brushless Drag Race Car Combo with 2.4GHz Radio with DVC, Battery and Charger is a complete setup developed for No Prep racing, and built upon the 9-time R.O.A.R. Short Course National Championship platform. 

This DR10 Drag Race Car features a water-resistant high-power Reedy brushless speed control and 3300kV brushless motor, a 2.4GHz 2-channel radio system, as well as Team Associated's DVC (Dynamic Vehicle Control) receiver unit with built-in adjustable digital gyro. Add to that a Reedy metal-gear, digital, high-torque servo and a water-resistant enclosed receiver box. The DR10 RTR Brushless LiPo Combo includes a Reedy Compact Balance Charger and Reedy 7.4V 2S LiPo Battery with T-plug to get you on the streets even faster.


 Features:

  • Based on the 9-time R.O.A.R. National Champion short-course race truck platform
  • 2.4GHz 2-channel radio with DVC receiver (Dynamic Vehicle Control) featuring built-in adjustable gyro
  • Three-position wheelie bar with optional large wheels
  • High-torque, metal-gear Reedy servo with spring style servo saver
  • Powerful Reedy 3300kV brushless motor
  • Factory finished, green two-piece Reakt drag race body with rear spoiler
  • Water-resistant high-powered Reedy brushless speed control with T-plug connector and Lipo low-voltage cutoff
  • Aluminum 12mm big bore coil-over shock absorbers 
  • Rear CVA driveshafts fro more reliability
  • Water-resistant enclosed receiver box
  • Rugged steel turnbuckles for adjustable camber and front toe-in
  • Lightweight front drag tires
  • Durable and lightweight aluminum top shaft
  • Low center-of-gravity molded composite chassis with hook-and-loop battery straps that accommodate both NiMH and 2/3S LiPo battery packs
  • Metric hardware throughout
  • 18 precision, rubber-sealed ball bearings
  • Durable front and rear wide body mounts
  • 2.6:1 ratio gearbox with heavy-duty sealed gear differential and externally adjustable slipper clutch
  • Adjustable suspension geometry
  • Vertical ball ends for roll center adjustments, front and rear
  • Many Factory Team options already available

Specifications:

  • Scale: 1:10
  • Power: Electric
  • Length: 609.6mm (24”)
  • Width: 272mm (10.70”)
  • Weight:  1850g (4.08 lbs)
  • Wheelbase: 322mm (12.68”)
  • Transmission Ratio: 2.6:1

Includes:

  • (1) Team Associated DR10 RTR Brushless Drag Race Car Combo
  • (1) 2.4GHz 2-channel Radio
  • (1) Reedy 7.4V 2S LiPo Battery with T-plug
  • (1) Reedy Compact Balance Charger

Needed to Complete:

  • (4) AA Alkaline batteries used in the transmitter

$20 Flat Rate shipping lower 48 USA only! Contact us at [email protected] for international shipping costs.

: *
: *
: *
 

Adjustable Push Rods (Turnbuckle)

$3.95 to $5.95

Description:
Our replacement adjustable push rods are as good as any out there at even better prices. Very similar to Hangar 9's Pro-Links, our adjustable push rods offer the ultimate in strength and security with the added bonus of ease of adjustability and ultra-light weight.

Our Pro-Links have a 4-40 right-hand thread on one side and a 4-40 left-hand thread on the other (turnbuckle). A machined hex in the middle (4mm / 5/32") allows you to make very fine length adjustments without removing the linkage from the servo arm or control horn.

They are also very lightweight, a 110mm (approx. 4.5") linkage weighs just 8 grams but has the strength to lift over 500 pounds. Pro-Links are ideal for any other 4-40 molded ball link or control horn and are available in a variety of sizes. We also have a machined-aluminum wrench that's perfect for making adjustments.


Sizes:

Metric Approx. US Standard
Non Threaded Length Entire Rod Including Threads Non Threaded Length Entire Rod Including Threads
20mm
45mm
0.79"
1.78"
30mm
55mm
1.18"
2.17"
40mm
65mm
1.57"
2.56"
80mm
110mm
3.15"
4.33"
110mm
140mm
4.33"
5.51"

(Sizes are approximate and can vary between rod length and threads as these are meant to be ADJUSTABLE)


SOLD IN PAIRS
 

SS-PR

$4.99

ManiaX Power LiPo 6S 5000mAh 22.2V eXpert Series 45C

ManiaX LiPo 6S 5000mAh 22.2V eXpert Series 45C 

MX-6S-5000-45C

$117.99

Dynam 12x6 Electric Prop (6mm Center Hole)

Dynam 12x6 Electric Prop (6mm Center Hole)
Dynam High Quality Carbon Fiber Electric Props. These props are durable and light, making them the ideal choice for your electric plane.

Available Sizes:

  • 9x6
  • 14x7
  • 15x6
  • 16x12
  • 17x12


    Features:

     

    • High Quality Carbon Fiber Weave
    • These carbon fiber propellers have been manufactured with very high standards.
    • Extremely light and strong with ultra thin and stiff carbon construction.
    • The center hole is 9mm and comes with a series of adapters to convert this all the way down to 3mm in 1mm increments.
    • The hub can also be reamed out safely to around 14mm.


     

DY-EP-12x6-6mm

$7.99