Taft-Hobby Turbo Bushmaster STOL 72"(1830mm) Wingspan - PNP 6CH with Flaps and LED Lights (Night Flyer)

Scale replica of a Turbo Bushmaster with a wingspan of 1830mm and excellent flight characteristics, which appeals to both ambitious beginners and experienced model builders. With the exclusive SIBA design, it is a real rarity and is only available in this form from the Taft Hobby brand. The technical equipment is also of particularly high quality: A powerful brushless motor (5015 / 550KV) with a thrust/weight ratio of approx. 2:1 and large control surfaces on the wings, elevator and rudder make the model a 3D aerobatic trainer with excellent slow flight and STOL properties (short take-off and landing). For this purpose, the plane was factory-equipped with huge pneumatic tires (125mm). The air pressure can be adjusted to your own needs with the included valve needle. Thus, the Turbo Bushmaster can be used on almost any surface. Due to the brute motor performance, a take-off distance of just a few meters is sufficient. The fully assembled landing flaps can also be controlled as ailerons via a mixer on the transmitter (rudder area of ​​the ailerons is almost doubled), which again significantly increases maneuverability and aerobatic characteristics. The ESC controller (Hobbywing 80A / 5V 8A UBEC) ensures good response in every situation and the precise digital servos with metal gears for optimal steering control. The main surface is in two parts and can be easily disassembled for transport.

Highlights:

• Oversized pneumatic tyres: With very good suspension and elasticity for hard take-offs and landings, even on uneven terrain (STOL-capable)
• All components already installed: Motor, controller, LED lighting, servos,
• Ailerons and landing flaps can be mixed: Ensures extreme maneuverability in flight

Other features:

• Unique, exclusive and highly visible SIBA design
• Lightweight yet robust EPO reinforced with composite materials
• Large wings and highly effective landing flaps for short takeoffs and landings (STOL-capable) as well as a high level of aerobatic maneuverability
• Drive designed for 6S LiPo batteries between 3000 - 5200mAh for a wide range of performance and flight time

Specifications:

• Wingspan: 1830mm (72")
• Length: 1330mm (51.2")
• Wing loading: 68.5g/dm²
• Wing area: 43.2dm²
• Weight: approx. 6 lbs (2685g) ready to fly (depending on battery size) 
• Main material: EPO foam, high-strength
• Thrust: over approx. 2:1
• Motor: 5015 / 550kv
• ESC Controller: 80A Hobbywing, 5V / 8A UBEC, XT90 plug
• Propeller: 15 x 7 / 2-blade wooden
• Servos: 2x 25g digital, 4x 19g digital 
• Construction time: approx. 30min 

Required accessories:
Transmitter and receiver at least six channels (recommended: at least 6-channel computer transmitter)
LiPo battery 3000 – 5200mAh 6S with XT90 connector 
Charger for drive battery