20cc Extra 330SC Profile (Upgraded)

Contact UsCustomer Reviews

20cc Extra 330SC Profile (Upgraded)

Our Price:

$349.99


Servo combo (qty 5)
Prop
Engine
Quantity (19)

Availability 19 in stock
Weight 65.00 lbs
SKU 20-Extra 330sc-Red with Blue

Announcing the new Redwing RC 20cc Extra 330SC Profile (Upgraded) now in stock! Another RWRC exclusive profile!!! What more can we say! Except new and improved with upgrades! Get ready to have fun! The price can't be beat, and the flying doesn't get any better with this 20cc Extra 330SC profile.

The Extra 330SC is one of the best style aircraft EVER built for aerobatics. Profiles are WELL known for their excellent light wing-loading and performance. Combine the two and this Extar 330SC 20cc is going to kick some butt!

Quantities are limited and we are moving through these fast at this price, so don't wait on pulling the trigger Get yours today!!!!

Specifications:

  • Wing span: 65"
  • Wing area: 1029 sq. in.
  • All up flying weight: 6.5-7 lb depending on build style and equipment
  • Length: 61.7"
  • Engine: (Any 20cc-26cc engine) Recommended: DLE 20; RCGF Stinger 20cc
  • Radio: 5 channel recommended (4ch possible)
  • Recommended Spinner Size: 2.5" or 3"
  • Recommended CG: 25%-30% from the LE at the ROOT
  • Recommended Prop Size: gas-16x6 or 16x8 sport, 17x6 3d; electric 16x10E or 17x8E
  • Recommended Throws: adjust to liking as you fly
    • Low Rates Settings | High Rate Settings
    • Rudder: 30 degrees, 20% expo | 50 degrees, 35% expo
    • Ailerons: 25 degrees, 25% expo | 40 degrees, 40% expo
    • Elevator: 20 degrees, 20% expo | 45 degrees, 40% expo

Upgraded Features:

  • Upgraded transparent fuel tank with built-in filter fuel tee
  • Upgraded engine mount with rienforced carbon laminate
  • Upgraded tail section design to allow quick installation
  • Main fuselage beam reinforced with carbon fiber
  • Upgraded spring loaded hatches in fuselage and wings for quick and convenient access to electronics
  • Upgraded wing plates to allow quick and convenient wing installation
  • Exclusive Redwing RC scheme

USER MANUAL

We DO ship our planes internationally! Please contact us at [email protected] with your location for more specific cost.


Old video but shows Yak 54 early scheme and how it flies!



: *
: *
: *
 

LiFe Batteries 2S

Description:
Our LiFe Batteries (also known as A123 Batteries) have huge advantages over most other options.

1) LiFe Batteries are lightweight - as light as Lipos
2) LiFes are safer than Lipos (do not combust easily like lipos)
3) LiFe Batteries supply a constant voltage (They stay right near 6volts from start to finish ensuring consistent flights)
4) Run Life batteries to your servos and ignition without regulators (For extra caution some people run a regulator to their ignition still)
5)Life's have a high Charging Capacity. Charge up to 5amps, allowing you to charge them up in MINUTES!

The 2100 or 3000 Mah can be used as a SINGLE battery system for 30cc planes. (we recommend spliting the lead and put 2 JR leads on, to run to the receiver and the other to ignition). You can also run a single 3000 Life Battery on a 50cc Plane.

The 1450mah LiFE Battery is a great option for those that want a separate battery for ignition and receiver (if you are running FM or hesitant to use a single battery system). The 1450mah Life is a great battery for the ignition for either a 30cc or 50cc sized plane

We recommend the following:
On the MXSR (2) 2100mah, or 1 3000mah placed on the mount box or front of the plane. It is a bigger plane and will do well with the extra voltage and weight.
Other 30cc planes - (1) 1450mah for ignition, (1) 2100mah for receiver or for a lighter set up
(1) 2100mah for both (split the wire to 2 leads) OR (2) 1450mah (one for ignition one for receiver).

50cc sized planes (1) 1450mah LiFe battery for ignition and (1) 3000mah LiFe battery for receiver or, for a lighter set up
(1) 1450mah for ignition, and (1) 2100 for receiver OR (1) 3000mah LiFe for both receiver and ignition



WATCH THIS VIDEO: Explains whether to use a regulator or not, 2 batteries or 1 for your plane, Redundancy and more.


Specifications:

  • Type: LiFe Battery (same technology as A123)
  • Weight:
    • 1450mah - 2.8oz,
    • 2100mah - 4oz,
    • 3100mah Life - 5.5oz
  • Size:
    • 1450mah- 15mm x 34mm x 87mm,
    • 2100mah- 12mm x 50mm x 106mm,
    • 3000mah- 130mm x 45mm x 15m
  • Voltage: 6.6Volts
  • Discharge rate:
    • 20c maximum continuous
    • 40c maximum burst
  • 2 cells (2s)
  • 14gauge Wire
  • Connectors: Two Options!
    • T Connector (T connector that fit a standard Dean)
    • XT-60 Connector. Choose Below
  • Also a balancing lead

Be sure to select the XT connector if purchasing for use with our Power Box PRO's. Please select connector type: Deans or XT.
 

 

 

  • 1450mah - $15.99
  • 2100mah - $25.99
  • 3000mah - $39.99
     

LiFe

$18.99

Miracle RC Aluminum Spinners (Spinner)

Description:

All NEW design! These Miracle aluminum spinners have back plates which have extensive lightening, the spinners are cut for a large 3d style prop, and the back plates are drilled for multiple engine sizes!

FOR ENGINE SIZE:

  • 2.5" Spinner : DLE 20, Enya FS120, All YS Four Strokes and any that match these
  • 2.5" Spinner : DLE 20, Enya FS120, All YS Four Strokes and any that match these
  • 3" Spinner: DLE 30, DLE 35RA, DLE 55, DLE 55RA, MLD 28, DA 50, 56, 58, and EVO 54 (and any other engines that fit these templates
  • 3.5" DLE 30, DLE 35RA, DLE 55, DLE 55RA, MLD 28, DA 50, 56, 58, and EVO 54 (and any other engines that fit these templates

    SPECS:
  • 2.5": Height 2.7", weight 2.7oz, includes 30mm bolt.
  • 3": Height - 3.1", weight 3.2 oz, includes 55mm bolt.
  • 3.5" : Height 3.7", weight 3.6oz, includes 60mm bolt.

 

 

Miracle RC Aluminum Spinners are high quality CNC Machined spinners. Very light, with a lightened back plate included. Very accurate, very beautiful, and a great value!

 

  • 2.5" - $16.95
  • 3" - $20.95
  • 3.5" - $27.95
  • 3.75"- $31.95
  • 4.0" - $38.95
  • 4.5" - $44.95
  • 5" - $50.95

MRC-Spinner

$24.95

Carbon Fiber Landing Gear (30cc-120cc sizes)

Available in styles for

  • Yak carbon fiber replacement gear Sbach carbon fiber replacement gear MXSR/MX2 carbon fiber replacement gear Extra carbon fiber replacement gear Edge carbon fiber replacement gear etc

    A - Sbach, MXSR, Slick, Edge, Extra 260
    B - Yak, Sukoi
    C - Yak also
    PLEASE NOTE: THE GEAR HAVE NOT BEEN DRILLED SO YOU CAN MATCH IT TO YOUR PLANE.



Dimensions (match the below information to the inset photo)

  • 30cc A STYLE (3.6 oz)
    • A=7.5"
    • B=16"
    • C=5.5"
    • D=1.187" taper to 1"
    • E=1.5"
  • 30cc B STYLE (3.8 oz)
    • A=6.5"
    • B=16.75"
    • C=6.25"
    • D=1.375" taper to 1"
    • E=1"
  • 30cc C STYLE (3.4 oz)
    • A=6.5"
    • B=15.5"
    • C=5.5"
    • D=1.125" taper to .75
    • E=1"
  • 50cc A STYLE (8.2 oz)
    • A=9.25"
    • B=18.75"
    • C=8"
    • D=1.5" taper to 1.125"
    • E=1.5"
  • 50cc B STYLE (6 oz)
    • A=8.75"
    • B=18.5"
    • C=6.5"
    • D=1.5" taper to 1"
    • E=1.25"
  • 50cc C STYLE (6 oz)
    • A=7.75"
    • B=18.5"
    • C=6.25"
    • D=1.5" taper to 1"
    • E=1.0"
  • 50cc A STYLE (8.2 oz)
    • A=9.25"
    • B=18.75"
    • C=8"
    • D=1.5" taper to 1.125"
    • E=1.5"
  • 50cc B STYLE (6 oz)
    • A=8.75"
    • B=18.5"
    • C=6.5"
    • D=1.5" taper to 1"
    • E=1.25"

 


 

SS-CF-LG

$39.99