Raptor H650 Sea Land Air 490mm Wingspan 2.4GHz 6CH Smart Balance Gyro EPP RTF
| Raptor H650 Sea Land Air 490mm Wingspan 2.4GHz 6CH Smart Balance EPP RC Do you feel the need for speed? Check out this unique 3-1 Sea, Land and Air turbo prop jet! This is a High Speed Turbo Prop Sport 3D Jet that will takeoff and land on the water or land (launch from cement or asphalt road, sand stone land, park lawn, water, etc., can also be hand thrown)...How cool is that?! With the balanced Flight Controller pilots can perform 3D maneuvers like, 360 degree flips, front flip, back flip, and roll. The H650 is constructed with EPO crash resilient foam and it is pre-painted saving you time. If that's not enough, all waterproof servos, turbo prop, and ESC are factory pre-installed. This airplane is designed for High-Speed flying which is made possible with a powerful Brushless Motor for High-Performance flying. In case you were wondering, this model is one of the fastest EPO Turbo Prop jets on the market. And finally, it comes with 2 LED bars that are already pre-installed on the leading edge of the wings for some spectacular night flying! Complete RTF bundle with everything in the box and comes with a built in gyro system for rock solid flight stabilization. It flies absolutely great right out of box without having to do any additional setup. Its very beginner friendly with its built in flight stabilization system and offers plenty of flight time on single 2S 1000mAh battery. Key Features:
Specifications:
|
| Special offers for this product are available! | |||||||||
 | |||||||||
|  |
| |||||||
Big HLK-31 Land Sea Plane
Big Brother HLK-31 Land Sea Plane
Raptor H650 RTF
Raptor H650 Air Land and Sea RTF
HLK-31 Land and Sea 630mm Turbo Prop Jet w/Auto-return 3D Stunt RTF
| HLK-31 Land and Sea 630mm Jet RTF Do you feel the need for speed? Check out the Dynam Meteor V2. This is a High Speed 70mm EDF Sport Jet that features retracts! How cool is that?! The Meteor V2 is constructed with EPO crash resilient foam and it is pre-painted saving you time. If that's not enough, all servos, 70mm Fan, and the 60Amp ESC are factory pre-installed. This airplane is designed for High-Speed flying which is made possible with a powerful Brushless Electric Ducted-Fan. The Fan Unit is is very well constructed for High-Performance flying. In case you were wondering, this model is absolutely one of the fastest EPO EDF jet on the market.
Key Features:
Specifications:
|
HLK-31-Seaplane
$229.99
AGFRC 2.4G 4CH Compatible Futaba FASST Receiver for Fixed Wing Aircraft or FPV Drone
2.4G 4CH Compatible Futaba FASST Receiver for Fixed Wing Aircraft or FPV Drone |
AGF-RFSS04F
$24.99
XT90-S Anti-Spark Connectors
| XT90 Anti-Spark Connectors
PRICE FOR PACKS OF 5 PAIR
|
EX-XT90S-antispark
$5.99
Bob Smith Industries 304 Pocket CA Extender Tips for Pocket CA Tops (6 Pack)
| Bob Smith Industries 304 Pocket CA Extender Tips for Pocket CA Tops (6 Pack) UN-CURE™ debonder will soften cured CA. If parts are bonded incorrectly or your fingers are stuck together, a few drops of UN-CURE™ will dissolve the CA in about a minute. Apply on bonded skin and roll apart fingers. Once stuck, use acetone to clean off softened CA, then wash off with soap and water. Since cured CA is essentially acrylic plastic, anything that will dissolve CA will also soften most plastics. Care must be used, therefore, when using Un-Cure on plastics. Separating plastics parts with a razor saw is usually the best option. Un-Cure™ will soften cured super glue (aka cyanoacrylate, CA). To release bonded skin (not near the eyes) apply Un-Cure™, then use a small, rounded object like a paperclip to separate the skin with a peeling action, applying more Un-Cure™ as needed until the skin areas are debonded. Wash the area with soap and water. The natural shedding of the skin’s outer layer will remove any residual CA within 12 hr. For removing CA from hard surfaces, soak a cloth or paper towel in Un-Cure™ and rub areas vigorously. Un-Cure™, however, will mar most plastics.
Works Best On:
Avaliable in 1 oz Size.
|
BSI-304
$2.99
