BLS-17A, Mega Fast For Heli Tail/Airplane Throttle Servo 19.4kg/269.5oz 0.03sec @ 8.4V (Includes Aluminum Arm)

Contact UsCustomer Reviews

BLS-17A, Mega Fast For Heli Tail/Airplane Throttle Servo 19.4kg/269.5oz 0.03sec @ 8.4V (Includes Aluminum Arm)

Our Price:

$97.99


Quantity (22)

Availability 22 in stock
Weight 0.51 lbs
SKU BBR-BLS-17A
Manufacturer Blue Bird

BLS-17A, Mega Fast For Heli Tail/Airplane Throttle Servo 19.4kg/269.5oz 0.03sec @ 8.4V (Includes Aluminum Arm)

APPLICATION / SUITABLE
Perfect for Helicopter tail [ Rudder ] & Airplane & 1/10th On-Road, Drift Car.  (EP / Gas / Nitro)
Specifications
Torque At 6.0V 13.8 kg-cm / 191.7 oz-in
Torque At 7.4V 17.1 kg-cm / 237.5 oz-in
Torque At 8.4V 19.4 kg-cm / 269.5 oz-in
Speed At 6.0V 0.045 sec / 60°
Speed At 7.4V 0.038 sec / 60°
Speed At 8.4V 0.033 sec / 60°

 

Protection Mechanism
Soft Start Protection Soft start back to neutral position.
Over Voltage Protection Over 9.0V drive the protection mode, and 8.4V return to normal mode.
Low Voltage Protection Lower than 4.0V drive the protection mode, and 4.5V return to normal mode.
Locked Rotor Protection Stall in 5 sec, output torque goes down.
Temperature Protection Overheat 85 degrees C (185 degrees F), drive the protection mode and down 75 degrees C (167 degrees F) return to normal mode.
Lose Control Protection When losing the transmitter signal, that servo will immediately be back to the neutral position and locked.

 

Power Supply
Operating Voltage Range  4.5V ~ 8.5V ( 4 ~ 6 Cell Ni-MH or 2S Li-Poly / 2S Li-Fe)

 

Control Specification
Control System Digital Controller / AD 12-Bits Resolution ( 4096 Steps )
Frequency:Up to 333Hz / Neutral:1500us or 1520us
Dead Band Width 0.001ms ( Default:1us)

 

Mechanical Specifications
Ball Bearing Dual, Stronger Ball Bearings.
Gear Titanium w/ Nanometer Alloy Gears
Motor High-Premium Brushless Motor
Horn / Gear Spline 25 Teeth ( Same as F-Type )

 

Physical Specifications
Dimension (mm) 40.5 x 20 x 39 mm / 1.59 x 0.79 x 1.54 in
Weight (gram) 76 ± 1 grams / 2.68 oz
Product Picture / Dimension Sketch
: *
: *
: *
 

Paraboard Parallel Charging Board /Deans (T-Plug) Connector

Paraboard Parallel Charging Board for Lipo /Deans (T-Plug) Connector

This Paraboard lets you charge and balance up to six lipo batteries at once! This board features Traxxas connectors for your batteries' main leads and JST-XH balance plugs ranging from 2S to 6S. They plug right into most popular models of 6S lipo balancing chargers that have 7-pin balance ports with 2.5mm pin spacing.

To get the most out of your Paraboard, pick up one of our GT-400 chargers. It provides 400W of total charging power and charge rates of up to 20 amps! This paraboard has a maximum charge rate of 30 amps.

Battery packs must be of the same cell count (only charge 2S with 2S, 3S with 3S, etc.) and battery voltages must be within 0.1V per cell (0.1V for 1S, 0.2V for 2S, etc.) of all other batteries connected to the Paraboard at the same time. Use a Cell Spy or similar voltage tester to check the voltage of each cell before connecting to the Paraboard.

EPB-Deans

$14.95

Curtiss P-40 Warhawk Micro RTF Airplane w/PASS System

Curtiss P-40 Warhawk Micro RTF Airplane w/PASS System

RGRA1305

$109.99