YX F180 V2 6CH 3D/6G RC Helicopter RTF or BNF

Contact UsCustomer Reviews

YX F180 V2 6CH 3D/6G RC Helicopter RTF or BNF

Market Price: $449.00
Our Price:

$349.99

You Save

22%

Version
Color
Quantity (4)

Availability 4 in stock
Weight 5.00 lbs
SKU HT-YX-F180-Orange

YX F180 V2 6CH 3D/6G RC Helicopter RTF or BNF

The F180V2 is an upgraded version of the F180, which mainly improves the appearance of the fuselage and the material of the landing gear. The current landing gear is made of very strong nylon. In addition, the software has also been upgraded to provide enhanced performance!

See it in action, CLICK HERE:

Features:
* INTEGRATE 3D AND 6G MODE. With 3- mode aerobatics you can easily make a variety of aerobatics. 6- mode is relatively stable, suitable for novices and beginners to operate. 3D MODE: Use 3- gyroscope, lock mode, accurate remote control. With a fast response, no delay can easily perform aerobatics such as inverted flight, standing pendulum, side pendulum and spin pendulum. 6G MODE, The 6G mode uses a 6- gyroscope self-stabilization mode, the aircraft can be restored to stability immediately after releasing the joystick suitable for beginners to operate.
* AILERON-LESS Design: it adopts an aileron-less design and cancels the traditional balance bar structure. The electronic stabilization system makes the hand feels more accurate, the flight is more stable and the structure is optimized to reduce the chance of damage.
* AERODYNAMIC DESIGN: The propeller is designed based on the principle of aerodynamics, providing strong power and self-stabilization of the airframes has the characteristics of high efficiency, power-saving, and long flight time. The propeller adopts nylon + carbon fiber composite material, which has high strength, good toughness, impact resistance, no deformation and durability. High- CNC carved frame, rotor head, rotor clip, cross plate. It optimizes the structure, reduces weight, and greatly reduces the chance of aircraft damage.
* THE WHEREABOUTS ARE UNDER CONTROL: with 2.4G communication protocol, the device is compatible with FUTABA, S-FHSS communication protocol, and can be expanded to satellite receivers. Support DSMX DSM2 PPM S-BUS format.
* POWERFUL DUALBRUSHLESS MOTOR: Direct drive motor use 3606 brushless motor dual- -drive (with utility model patent technology), reduce fear restlessness, with the characteristics of low noise, large torque power, and high efficiency. A special high-temperature resistant magnet can withstand 150 degrees of high temperature without damage, and improve service life. The tailgate lock motor uses a special 1104 brushless motor, which has the characteristics of high-temperature resistance, fast response, stable tailgate lock, and it is not easy to be damaged after a long time of work.
* METAL DIGITAL STEERING GEAR: The use of large 4.3g metal digital steering gear, with accurate centering characteristics, the response speed is 60°/0.05ms, the aircraft has accurate flight, good hand feels, and longer service life.

Specification:
Item name: F180V2 RC Helicopter
Color: Orange or Green
Materail: 3k carbon fiber composite material
Receiver: compatible with FUTABA, S-FHSS communication protocol; Support DSMX DSM2 PPM S-BUS format
Remote controller: 2.4G remote control
Motor: 3606 brushless motor+1104 brushless motor

Rotor blade diameter: 410mm
Fuselage length: 400mm
Height: 120mm
Weight: 297g

Battery: 11.1V 700mAh 25C lipo
Charging time: 90mins
Working time: 6-10mins
 
Package information:
Package size: 45.8*28.4*9.5cm
Package weight: 818g

Package list: 
1 * Helicopter and Remote Controller (RTF) (BNF version, no remote controller)
1 * USB
2 * Mian Blade
1 * Tool Kit
2 * Rubber fixing ring
1 * Battery
1 * Manual

  • * INTEGRATE 3D AND 6G MODE. With 3-axis mode aerobatics you can easily make a variety of aerobatics. 6-axis mode is relatively stable, suitable for novices and beginners to operate. 3D MODE: Use 3-axis gyroscope, lock mode, accurate remote control. With a fast response, no delay can easily perform aerobatics such as inverted flight, hurricane standing pendulum, side pendulum and spin pendulum. 6G MODE, The 6G mode uses a 6-axis gyroscope self-stabilization mode, the aircraft can be restored to stability immediately after releasing the joystick suitable for beginners to operate.
  • * AILERON-LESS Design: it adopts an aileron-less design and cancels the traditional balance bar structure. The electronic stabilization system makes the hand feels more accurate, the flight is more stable and the structure is optimized to reduce the chance of damage.
: *
: *
: *
 

XQ 4013 digital 6v

Description:
The XQ 4013 servo is the best option out there for 30cc sized 3d planes. Perfect combination of speed and torque and a price point that make the other servo companies jealous.

The XQ 4013 has superior reliability to other servos. They have a core less digital motor, for precise strong movement. The XQ 4013 has all titanium gears, heat sink to reduce overheating, waterproof housing, and great torque and speed.

The XQ 4013 is perfect for a 30CC 3D plane for ALL surfaces. They can be used reliably in a 50cc plane also on all surfaces.

Specifications:

  • Torque:
    • 166.7 oz/in at 4.8V (12.0 kg/cm)
    • 197.2 oz/in at 6V (12.8 kg/cm)
       
  • Speed:
    • .13 sec at 4.8V
    • .11 sec at 6V
       
  • Voltage: 4.8V - 6V
  • Weight: 2 oz (59g)
  • Size: 40x20x39mm
     
  • Gear Style: Futaba Arms
  • Modulation: Coreless Digital
  • Gear Type: Titanium
  • Weight: 2oz (59g)
  • Size: 40x20x39mm




Watch this video of the XQ 4013 beating the Hitec 7985mg

Features:

  • Titanium Gears
  • Waterproof
  • Coreless
  • Digital
  • High Torque/High Speed
  • Smooth resolution


Don't forget to buy some circle servo arms to fit your carbon fiber arms you got in your kit!

 

X-4013

$42.50

DLE 20cc Engine

+ Free Shipping (Continental US only!) If international customer, please contact us for shipping quote. You will be charged separately for shipping.
+ Free 2 Year warranty

 

 

Description:
Glow power isn't the only option anymore. The DLE-20 not only fills the displacement gap, but includes a beam mount to make the glow-to-gas upgrade drop-in fast and easy. A rear pumper carb simplifies installation and adjustment of the DLE 20cc. A generous package of "extras" and electronic ignition for starting ease and top performance make the DLE 20 an attractive alternative to glow…and a solid buy for value and performance.

We supply a free 2 year warranty with our DLE 20, and also back it with our in house repair of DLE engines.



Download DLE 20 Manual



Specifications:

  • Stock Number: DLEG0020
  • Displacement: 20 cc (1.22 cu in)
  • Bore: 1.3 in (32 mm)
  • Stroke: 1.0 in (25 mm)
  • Weight: 28.9 oz (820 g)
  • RPM Range: 1,750-9,000
  • Output: 2.5 hp @ 9,000 rpm
  • Requires: unleaded gasoline, 2-cycle oil, ignition battery & propeller
  • Includes: electronic ignition, muffler, spark plug, gasket, bolts, throttle arm extension & manual
  • Suggested Propellers: 16x8 17x6
  • Suggested Break-in Prop: 16x8
  • Ignition Battery: 4.8-6.0V NiCd or NiMH, 6.6V LiFe or 7.4V LiPo pack (LiPo use requires voltage regulator.)
  • Compression Ratio: 10.5:1
  • Gas/Oil Mix: Break in with Lawn Boy(or similar non synthetic oil) at 32:1 Ratio per gallon / Use RedLine oil at 50:1 for long term use after break in.
  • Replacement Spark Plug: NGK CM6 (DLEG5510) or equivalent
  • Weight Breakdown: Engine: 22.9 oz (650 g); Muffler: 1.8 oz (50 g); Ignition: 4.2 oz (120 g)
  • Recommended Propeller: Hawk "C" type 17x6 (for 3d), 16x8 (sport/pattern)

 

 

RedwingRC Pre-Run
DLE 35ra DLE55


 

 

DLE-20

$249.99

SmartDesign V3 "Trouble Free" Tail Wheel Assembly

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Description:

This tail wheel assembly is extremely efficient and reliable. With fewer parts, there is less to worry about and the solid construction makes it the go-to choice for pilots at any skill level. The new V2 design incorporates ball bearings for smooth motion, ball-joint to rudder steering connection, wider CF mounting plate, and slightly larger wheels that the v1. "Trouble Free" means just that... no more worrying about screws falling out or loss of control. Make the switch today by installing the SmartDesign Tail Wheel!!!

CNC Aluminum & C.F. Tail Wheel Assembly for 20cc to 220cc

 


 

Features:

 

  • Extremely Reliable
  • Mechanically Efficient Design
  • Simple and Solid Construction
  • Fewer parts needed for install
  • Ball Bearings

 

Pricing

 

  • 20-40cc: $27.00
  • 50-70cc: $34.99
  • 85-120cc: $44.99
  • 150cc-220cc: $54.00

 

 

Weight

 

 

  • 20-40cc: 1.2 oz
  • 50-70cc: 1.6 oz
  • 85-120cc: 2.2 oz
  • 150cc-220cc: 2.6 oz

Don't forget to check out our Aluminum Hub Wheels! They are excellent replacements for landing gears and tail wheels. Please see sizing chart below.

Tail Wheel Chart

GW-KAGC-112

$54.99