RCGF 63CC SE Stinger Pro Gas Engine With Stock Muffler

Ask a question about this product

Printable version

Options

Market Price: $559.95

Our Price:

$465.00

You Save

17%

Quantity (1)

Details


Availability	1 in stock
Weight	5.00 lbs
SKU	RCGF-63cc-SE-stock-muffler

NEW STINGER PRO 63cc SE GAS ENGINE with Stock Muffler

The ALL NEW STINGER 63cc SE Stinger engine features all new castings, but most importantly cylinder head and piston are both ceramic coated! These components are coming out of the same foundry as other BIG PERFORMANCE ENGINE NAME BRANDS but at a great value price! A genuine WALBRO rear pumper carb simplifies installation and adjustment. NEW STINGER 63cc SE is starting ease and top performance make the 63cc SE an attractive alternative to other 55-60cc class gas engines and a solid buy for value and performance.

More powerful!
Longer Use Life!
Much Better Performance!
New ceramic plating cylinders will bring you indredible flying experience!

Parameters:

TYPE	2 cycle piston valve type gasoline engine for airplane
DISPLACEMENT (CC)	63cc
BORE (MM)	47 mm
RECOMMENDED PROPS	23X10,24X8,24X9,24X10
MAXIMUM OUTPUT	6.5 Horsepower
POWER SUPPLY	7.4V-14V

Carburetor : Walbro
Ignition : Stinger DC-CDI (Computer Controlled auto advance, electronic ignition system)
SPARK PLUG: NGK CM6
Requires: Gasoline, 2-cycle oil, ignition battery & propeller
speed rang : 1500-7500rpm
Gasoline-Version : Pre-mixed Fuel, 25-40 (Gasoline):1 (recommended : 32:1 for real oil, or 40:1 for synthetic oil)
Lubrication Oil : High quality fully synthetic 2 cylinder oil such as Motul 800 2T 100% synthetic racing motro oil , Red line two-stroke racing motor oil , Stihl Ultra high performance 2 cycle fully synthetic engine oil etc .
Break in Propeller : 24X9 (Standard Two leafs prop)
Break in Gas/Oil Mix Ratio :40:1 for real oil, or 40:1 for synthetic oil
Cooling System : Air Cooled
RCGF Stinger Engine package Includes: electronic CDI ignition, muffler, spark plug, gaskets, bolts, throttle arm extension & manual.

Weight:

Engine: 1400g (50 oz)
Muffler: 170g (6.4 oz)
Ignition Module: 131g (4.4 oz)
Total: Weight: 1701g (60.8 oz)

Technical Data:

Ignition Battery: 7.4V-14VNiCd or NiMH, 7.4V LiFe or 2S LiPo pack
Gasoline/Oil Mix: 40:1 for synthetic oil
Replacement Spark Plug: NGK CM6 or equivalent
Idle Speed: 1500 rpm/min

Service/Parts:

Serviced right here in the USA.
Warranty and Service Center with readily available spare parts here in the USA!

$20 flat rate shipping for Domestic US only ($75 economy to Canada) send us an email at [email protected] to calculate shipping cost.

Paraboard Parallel Charging Board /EC5+Deans (T-plug) Connector

Paraboard Parallel Charging Board for Lipo /EC5+Deans Connector

This Paraboard lets you charge and balance up to six lipo batteries at once! This board features Traxxas connectors for your batteries' main leads and JST-XH balance plugs ranging from 2S to 6S. They plug right into most popular models of 6S lipo balancing chargers that have 7-pin balance ports with 2.5mm pin spacing.

To get the most out of your Paraboard, pick up one of our GT-400 chargers. It provides 400W of total charging power and charge rates of up to 20 amps! This paraboard has a maximum charge rate of 30 amps.

Battery packs must be of the same cell count (only charge 2S with 2S, 3S with 3S, etc.) and battery voltages must be within 0.1V per cell (0.1V for 1S, 0.2V for 2S, etc.) of all other batteries connected to the Paraboard at the same time. Use a Cell Spy or similar voltage tester to check the voltage of each cell before connecting to the Paraboard.

EPB-EC5-Deans

$14.95 14.95

HiTec DB778WP, Ultra-Torque, Brushless, Low Profile, HV Waterproof Servo 20.4kg/283.6oz [email protected]

With ultra-efficient Neu brushless motors, titanium gear trains, low current consumption and constant output power, the HSB-93XX series of servos is the perfect match for the most discriminating pilots and racers. The HSB-9360’s speed is ideal for pilots with the need for speed!

Features:

Power Efficient Brushless Motor Controller
Energy efficiency is a common interest for all modelers. Our HSB-9XXX Series uses the latest control circuit technology including a regenerative braking circuit which puts power back into the battery as the motor slows. This feature, combined with ultralow current draw under sustained loads, allows our brushless servos to consume 1/5 the power of most other brushless servos on the market today.
Custom NeuMotor
Designed by Steve Neu exclusively for our HSB-9XXX Series, these high performance, brushless motors provide longstanding durability and performance.
Constant Torque Output:
Thanks to our revolutionary circuit and motor designs, the HSB-9XXX Series maintain their speed in a more consistent manner, regardless of load.
Hybrid MPD 1st Gear:
Our unique ultra-durable Metal/Plastic/duralumin hybrid first gear prevents inadvertent electrical noise from affecting other components within your aircraft or vehicle.
Industry-Leading Titanium Gear Train
Hitec was the first manufacturer to utilize low wear Titanium gears in our servos and continues to be the leader in Titanium gear technology.
25-Tooth Standard Spline
Our Brushless servos utilize a standard 25 tooth output spline for maximum compatibility with the large variety of aftermarket horn available on the market these days.

Specifications:
- Torque:
  - 236 oz/in at 6V (17.0 kg-cm)
  - 236 oz/in at 7.4V (17.0 kg-cm)
- Speed:
  - .08 sec at 6V
  - .06 sec at 7.4V
- Voltage: 6V - 7.4V
- Weight: 2.40oz (68g)
- Size: 40 x 20 x 68 mm (1.57 x 0.79 x 1.50in)