Products Map - RedwingRC.com

Replacement wheel pants for the Redesigned 30cc Slick 540. Available in Orange of green. Sold in pairs, includes wheel pants only.

Replacement canopies for our 30cc Slick 540! Just like the plane, these canopies are available in 2 color schemes. 

It's back and better than ever! The RedwingRC 30cc Slick 540 is suited for both extreme 3D and traditional aerobatic/sport flight. Showing both smooth lines and awesome performance, the Slick 540 does most of your typical maneuvers very well: clean knife edge passes, exceptionally smooth rolling harriers, and clean snap maneuvers aided by its designed weight distribution. 

The RedwingRC Slick 540 has been redesigned to give you the best possible flight experience and with the new bold contrasting schemes, you will have great visibility even from a distance.

Click Here to see the 30cc Slick 540

Replacement cowls for our 30cc Slick 540! Just like the plane, these cowls are available in 2 color schemes. 

It's back and better than ever! The RedwingRC 30cc Slick 540 is suited for both extreme 3D and traditional aerobatic/sport flight. Showing both smooth lines and awesome performance, the Slick 540 does most of your typical maneuvers very well: clean knife edge passes, exceptionally smooth rolling harriers, and clean snap maneuvers aided by its designed weight distribution. 

The RedwingRC Slick 540 has been redesigned to give you the best possible flight experience and with the new bold contrasting schemes, you will have great visibility even from a distance.

Click Here to see the 30cc Slick 540

This airframe is currently out of stock. No current ETA on a new shipment.”
 

Description:

Now with Carbon Fiber Reinforcements!

The Redwing RC Stinson Reliant SR9 30cc, is a VERY scale replica of the original plane, built in the 1930s by Aviation Manufacturing Corp. Originally powered by a radial engine, this 30cc Stinson is built to accept the DLE 30, or DLE 35 engine. We recommend a Pitts muffler for the DLE 30, or just going with the DLE 35RA.

The latter Stinson Reliant (SR7 through SR9 and later) had the unique GULL shaped wing, that you see in our scale model. Impressive in photos and EVEN more so in life! You will fall in love with the subtle beauty of this plane.

Go ahead, click around on those photos again and fall deeper in love, and order one up now!

Golden Age lovers will be all over this IMAA legal 30cc Stinson Reliant SR9. It is one of the most comfortable golden age planes you will EVERY fly! Comes in slow and steady for landings, and has very smooth predictable flight. No white knuckles with this scale 30cc Stinson SR9


*PLEASE NOTE: Both the Red and the Yellow Schemes have the same features- Door, Ladder, Flaps, etc.

*Images show optional graphics*


Buy Replacement Parts
Product Manual


Video:

Specifications:

• Wing span: 86"
• Wing area: 1020 sq. in.
• All up flying weight: 10-12 lbs. depending on build style
• Length: 58"
• Cowl:
  • Inside Width: 7" (177.8mm)
  • Inside Height: 7" (177.8mm)
• Engine: DLE 30, DLE 35RA, PTE 36
• Radio: 6 channel recommended (4ch possible)
• Recommended Spinner Size: Prop nut
• Recommended CG: Front edge of wing tube to 1/4" in front of the wing tube
• Recommended Prop Size:
  • 18x6, 19x6, 20x6
• Recommended Throws: adjust to liking as you fly
  • Low Rates Settings | High Rate Settings
  • Rudder: 25 degrees, 20% expo | 45 degrees, 35% expo
  • Ailerons: 25 degrees, 25% expo | 40 degrees, 40% expo
  • Elevator: 20 degrees, 20% expo | 40 degrees, 40% expo

Features:

• Removable stab
• Ringed cowl
• Adjustable push rods
• Aluminum landing gear
• Carbon fiber reinforcement tubes in wings
• Fast fly and easy build features, such as : Pre-drilled hinges, pre-plumbed fuel tank, and pre-installed rudder cable
• Scale features: Door, Ladder, and functional flaps.

Description:

Now with Carbon Fiber Reinforcements!

The Redwing RC Stinson Reliant SR9 30cc, is a VERY scale replica of the original plane, built in the 1930s by Aviation Manufacturing Corp. Originally powered by a radial engine, this 30cc Stinson is built to accept the DLE 30, or DLE 35 engine. We recommend a Pitts muffler for the DLE 30, or just going with the DLE 35RA.

The latter Stinson Reliant (SR7 through SR9 and later) had the unique GULL shaped wing, that you see in our scale model. Impressive in photos and EVEN more so in life! You will fall in love with the subtle beauty of this plane.

Go ahead, click around on those photos again and fall deeper in love, and order one up now!

Golden Age lovers will be all over this IMAA legal 30cc Stinson Reliant SR9. It is one of the most comfortable golden age planes you will EVERY fly! Comes in slow and steady for landings, and has very smooth predictable flight. No white knuckles with this scale 30cc Stinson SR9


*PLEASE NOTE: Both the Red and the Yellow Schemes have the same features- Door, Ladder, Flaps, etc.

*Images show optional graphics*


Buy Replacement Parts
Product Manual


Video:

Specifications:

• Wing span: 86"
• Wing area: 1020 sq. in.
• All up flying weight: 10-12 lbs. depending on build style
• Length: 58"
• Cowl:
  • Inside Width: 7" (177.8mm)
  • Inside Height: 7" (177.8mm)
• Engine: DLE 30, DLE 35RA, PTE 36
• Radio: 6 channel recommended (4ch possible)
• Recommended Spinner Size: Prop nut
• Recommended CG: Front edge of wing tube to 1/4" in front of the wing tube
• Recommended Prop Size:
  • 18x6, 19x6, 20x6
• Recommended Throws: adjust to liking as you fly
  • Low Rates Settings | High Rate Settings
  • Rudder: 25 degrees, 20% expo | 45 degrees, 35% expo
  • Ailerons: 25 degrees, 25% expo | 40 degrees, 40% expo
  • Elevator: 20 degrees, 20% expo | 40 degrees, 40% expo

Features:

• Removable stab
• Ringed cowl
• Adjustable push rods
• Aluminum landing gear
• Carbon fiber reinforcement tubes in wings
• Fast fly and easy build features, such as : Pre-drilled hinges, pre-plumbed fuel tank, and pre-installed rudder cable
• Scale features: Door, Ladder, and functional flaps.

30cc V3 Extra Replacement Gear Cuffs. These gear cuffs fit over the landing gear and rest against the fuse. Gear cuffs are a great way to add an a scale aesthetic to your plane while adding to the aerodynamic properties of the airframe.

Sold in pairs.

30cc Yak 55 - Purple or Green 

Description:

Now with Carbon Fiber Reinforcements!

The Yak 55M was first built in the late 1980s based off the original Yak55. It further increased the roll rate and agility to create the aerobatic monster known as the Yak 55M!

The Yak 55M like its related Yak 54, has great qualities for both 3d and precision flying. It has very scale features that closely match the original Yak 55M.

The unique scheme on this Yak 55M was created by professional designer Xavier Stevens! With its striking contrast and beautiful curves, this Yak 55M is sure to catch the attention of the crowd wherever you fly!

It is lightweight enough to fly well, but as ALL our Redwing models, this 30cc Yak 55m has been reinforced in the "right places" such as the fire wall, landing gear, and other vulnerable spots.



Videos on this plane:





Buy Replacement Parts
Product Manual




Specifications:

• Wing span: 73"
• Wing area: 1005 sq. in.
• All up flying weight: 10.5-12lb depending on build style
• Length: 66"
• Cowl:
  • Inside Width: 8.5" (215.9mm)
  • Inside Height: 8.5" (215.9mm)
• Engine: (Any 30-36cc engine) Recommended: DLE 30, DLE 35, PTE 36
• Radio: 6 channel recommended (4ch possible)
• Recommended Spinner Size: 3"
• Recommended CG: 5.25" to 5.5" from LE at Root of the wing
• Recommended Prop Size:
  • 18x8/10, 20x10 for sport
  • 18x619x6/8, 20x6/8 for 3d
• Recommended Throws: adjust to liking as you fly
  • Low Rates Settings | High Rate Settings
  • Rudder: 30 degrees, 20% expo | 50 degrees, 35% expo
  • Ailerons: 25 degrees, 25% expo | 40 degrees, 40% expo
  • Elevator: 20 degrees, 20% expo | 45 degrees, 40% expo

Features:

• Removable stab
• Ringed cowl
• Adjustable push rods
• Canister ready
• Carbon Fiber Stringers run full length of fuse
• Painted Control horns to match paint scheme of plane
• Vortex Generators
• Servo Reinforcement pieces

We DO ship our planes internationally!

Please contact us with your location for more specific cost.

3520 650KV Brushless Motor for (55-61" Planes)

The Tomcat G25 Brushless motor. This is a high-end motor combines ultra-high power and super efficient design to deliver outstanding performance.

Specifications

• Type:......................... C-G-3527-KV1140 (G25)
• KV(rpms per volt):... 1140
• No load current: ....... 3.2 A @10V
• Resistance:................ 0.016 ohms
• Watts:........................ up to 860
• Continuous Current:... 48A
• Max Burst Current:.... 56A,10seconds
• Cells:......................... 3–4 S Li-Po
• Recommended Props: 8x6 to 10x10
• Slots,Poles:............... 12,14
• Diameter:.................. 35 mm
• Shaft: Diameter:........ 5.0 mm
• Weight:...................... 180 g
• Brushless ESC:......... 60A

35cc Nemesis 74" (1880mm)

$30 Container Freight charge has been added to this item due to excessive Container prices!

We are growing again with the addition of the 30cc "Strong Design" Edge 540 V3. This 30cc SD EDGE was designed from the ground up by aeronautical engineer Adam Strong. Tested, perfected and approved, to make sure this is going to be the best 30cc Edge out there, in flight and quality/features. It is carbon fiber rich, in the wings fuselage and the accessories.

The Edge 540 is known for its unsurpassed harrier and slow alpha flight capability and this 30cc version is no different, and specially designed by Adam Strong to take advantage of the scale planes tendencies, but added thought into what you want out of a modern day RC plane. Prepare to be amazed!

Enjoy smooth clean knife edge and similar maneuvers as well as very predictable smooth 3D. Very even rolling harriers, easy hover and torque rolls - this plane is a GREAT learning tool with the wonderful advantages of gasoline. 

This new 30cc Edge 540 comes with the same great features that Redwing provides with all of our planes. It is set up and ready for a DLE 30 or 35RA to be mounted right in - or try going electric with our new Tomcat Electric Motors with a little adaptation. A neat feature of the 30cc Edge is that is has a carbon fiber reinforcements in the fuselage and wings for added strength.

The 30cc Edge 540 is available in 3 new attractive schemes designed by Adam Strong. Get them while they are in stock. This is a great new plane so don't let this one slip by.

Product Manual

Check out this awesome plane in action!

Specifications:

• Wing span:
  • With tips:78.5
  • Without tips: 75"
• Wing area: 1145 sq. inches (wings and stabs measured ONLY) More surface area when considering fuselage
• All up flying weight: 10.5 to 12 lbs.
• Engine: DLE 30, DLE 35RA or similar, or Equivalent Electric System
• Recommended Spinner Size: 3"
• Recommended CG: 5" to 5.75" from the front half of wing tube
• Recommended Prop Size: 18x8 to 20x8
• Recommended Throws: adjust to liking as you fly LOW MED HIGH

  AIL 1.75”/30% 2.75”/40% 4”/60%

  ELE 2.5”/30% 3.25”/ 40% 4”/55%

  RUD 2.5”/20% 3”/ 30% 4.25”/40%

  
  
  
  
  

Features:

• Removable stab
• Ringed cowl
• Canister Tunnel built in
• Painted matching spinner (available separately)
• Includes a black plastic spinner
• Optional integrated air deflector for venting hot cowl air
• Fast Fly Feature: Pre-installed hinges (except rudder)
• Carbon Fiber Retention Pins in stabs
• Fiberglass tabs on stabs (stronger than wood)
• Carbon Fiber Wing Tube
• Metal Servo arm set
• Removable Side Force Generators / Racing Wing tips

We DO ship our planes internationally!

Please contact us with your location for more specific cost.

35cc Nemesis 74" (1880mm)

Pre-order sale $100 off! Estimated Arrival late Aug 2023

• This is an EXTREMELY popular product and quantiities limited, so we STRONGLY recommend pre-ordering if you wish to receive a unit from the first shipment.

Credit Card or other payment will be charged at the time of order.

$30 Container Freight charge has been added to this item due to excessive Container prices!

We are growing again with the addition of the 30cc "Strong Design" Edge 540 V3. This 30cc SD EDGE was designed from the ground up by aeronautical engineer Adam Strong. Tested, perfected and approved, to make sure this is going to be the best 30cc Edge out there, in flight and quality/features. It is carbon fiber rich, in the wings fuselage and the accessories.

The Edge 540 is known for its unsurpassed harrier and slow alpha flight capability and this 30cc version is no different, and specially designed by Adam Strong to take advantage of the scale planes tendencies, but added thought into what you want out of a modern day RC plane. Prepare to be amazed!

Enjoy smooth clean knife edge and similar maneuvers as well as very predictable smooth 3D. Very even rolling harriers, easy hover and torque rolls - this plane is a GREAT learning tool with the wonderful advantages of gasoline. 

This new 30cc Edge 540 comes with the same great features that Redwing provides with all of our planes. It is set up and ready for a DLE 30 or 35RA to be mounted right in - or try going electric with our new Tomcat Electric Motors with a little adaptation. A neat feature of the 30cc Edge is that is has a carbon fiber reinforcements in the fuselage and wings for added strength.

The 30cc Edge 540 is available in 3 new attractive schemes designed by Adam Strong. Get them while they are in stock. This is a great new plane so don't let this one slip by.

Product Manual

Check out this awesome plane in action!

Specifications:

• Wing span:
  • With tips:78.5
  • Without tips: 75"
• Wing area: 1145 sq. inches (wings and stabs measured ONLY) More surface area when considering fuselage
• All up flying weight: 10.5 to 12 lbs.
• Engine: DLE 30, DLE 35RA or similar, or Equivalent Electric System
• Recommended Spinner Size: 3"
• Recommended CG: 5" to 5.75" from the front half of wing tube
• Recommended Prop Size: 18x8 to 20x8
• Recommended Throws: adjust to liking as you fly LOW MED HIGH

  AIL 1.75”/30% 2.75”/40% 4”/60%

  ELE 2.5”/30% 3.25”/ 40% 4”/55%

  RUD 2.5”/20% 3”/ 30% 4.25”/40%

  
  
  
  
  

Features:

• Removable stab
• Ringed cowl
• Canister Tunnel built in
• Painted matching spinner (available separately)
• Includes a black plastic spinner
• Optional integrated air deflector for venting hot cowl air
• Fast Fly Feature: Pre-installed hinges (except rudder)
• Carbon Fiber Retention Pins in stabs
• Fiberglass tabs on stabs (stronger than wood)
• Carbon Fiber Wing Tube
• Metal Servo arm set
• Removable Side Force Generators / Racing Wing tips

We DO ship our planes internationally!

Please contact us with your location for more specific cost.

39" (1000mm) Extra 330 ARF/PNP

Redwing RC has partnered with Dancing Wings to bring you this new 39" Extra 330 3D aerobatic model available as an ARF/PNP. 

Pre-order sale $50 off! Estimated Arrival Late Sept 2023

• This is an EXTREMELY popular product and quantiities limited, so we STRONGLY recommend pre-ordering if you wish to receive one from the first shipment.

Credit Card or other payment will be charged at the time of order.

3S Indoor Foamie Power Pack 1908-2050KV Brushless Motor, ESC, and Prop Adapter Combo

The Tomcat G25 Brushless motor. This is a high-end motor combines ultra-high power and super efficient design to deliver outstanding performance.

Specifications

• Type:......................... C-G-3527-KV1140 (G25)
• KV(rpms per volt):... 1140
• No load current: ....... 3.2 A @10V
• Resistance:................ 0.016 ohms
• Watts:........................ up to 860
• Continuous Current:... 48A
• Max Burst Current:.... 56A,10seconds
• Cells:......................... 3–4 S Li-Po
• Recommended Props: 8x6 to 10x10
• Slots,Poles:............... 12,14
• Diameter:.................. 35 mm
• Shaft: Diameter:........ 5.0 mm
• Weight:...................... 180 g
• Brushless ESC:......... 60A

Indoor Micro Flyer Power Pack 1914-1100KV Brushless Motor, ESC, and Prop Adapter Combo

The Tomcat G25 Brushless motor. This is a high-end motor combines ultra-high power and super efficient design to deliver outstanding performance.

Specifications

• Type:......................... C-G-3527-KV1140 (G25)
• KV(rpms per volt):... 1140
• No load current: ....... 3.2 A @10V
• Resistance:................ 0.016 ohms
• Watts:........................ up to 860
• Continuous Current:... 48A
• Max Burst Current:.... 56A,10seconds
• Cells:......................... 3–4 S Li-Po
• Recommended Props: 8x6 to 10x10
• Slots,Poles:............... 12,14
• Diameter:.................. 35 mm
• Shaft: Diameter:........ 5.0 mm
• Weight:...................... 180 g
• Brushless ESC:......... 60A