Products Map - RedwingRC.com

MKS-X6 Metal 1.5" and 1.25" Servo Arm

MKS-X6 Metal 2" and 1.75" Servo Arm

MKS-X6 Metal 3.0" Rudder Arm

MKS-X6 Metal 3.5" Rudder Arm

MKS-X8 Hub Set

 

X8 1.5" and 1.25" Metal horn.  This horn will only work on the 8mm X8 Spline.  HBL380, HBL850, HBL880 and HBL860

 

X8 2" and 1.75" Metal horn. 
This horn will only work on our X8 8mm Spline. 
HBL380, HBL850, HBL880 and HBL860

 

X8 3" and 2.5" Rudder Metal horn. 

This horn will only work on our X8 8mm Spline. 
HBL380, HBL850, HBL880 and HBL860

 

X8 3.5" Rudder Metal horn. 

This horn will only work on our X8 8mm Spline. 
HBL380, HBL850, HBL880 and HBL860

 

Rockets

Description:

MPI servo arms are made with heavy duty anodized aluminum offset servo arms designed for Hitec, Futaba, XQ Power, Power HD Servos. These MPI servo arms are drilled and tapped for 4-40 with a starter hole for another hole closer in if necessary. The clamping arm on these MPI arms ensures a safe and secure installation, minimizing any risk of slop or the arms coming loose. 

We recommend the following sizes of MPI arms for the planes below:

30cc planes typically use 1.25" for ailerons and elevators, and 3" for rudder.

50cc planes typically use 1.25-1.5" for ailerons and elevators, and 3.5" - 4" for rudder.

100cc planes typically use 1.5" for ailerons and elevators, and 4" for rudder.

1.25", 1.5", 3", 4" Sizes
Available for HiTEC, XQ Power, PowerHD, Futaba Servos

MPI Arms feature:
Bracing for Extra Strength
Lightweight and Strong
Extra Security Screw to Keep Arms on
Pre Dented to Allow for Optional Holes


Futuba style arms fit: Power HD, XQ-Power, and Futaba
Hitec fit: Hitec


**Now introducing new size! 2-inch lengths for HiTec and Futaba!

MPI Servo Arm Pricing:

• 1.25" arm $8.90
• 1.5" arm $10.25
• 2" arm $11
• 3" rudder arm $15.25
• 4" rudder arm $16.95
  

 

 

 

 

 

 

Description:

MPI Charge switch with LED indicator for HiTec and JR leads and on-board battery checker! The three LEDs - green, yellow, & red - monitor the status of the flight pack. It is designed to test the battery under the actual load of the on-board equipment.

The switch is factory preset to 4.8V applications - but for 6V use, simply cut the jumper loop on the back of the switch and seal the wires with silicone glue or tape. The jumper wires can be reconnected for 4.8V operation.

Features:

• Heavy duty switch and wires
• Sturdy one-piece design
• Built-in Redundancy
• 3-LED on-board battery checker
• Compatible with 4.8v and 6v Rx packs
• Easy installation and operation
• Silicone shock mount included
• DSC compatible