BG-1343SW (SAIL WINCH), DIGITAL, BRUSHLESS

BG-1343SW (SAIL WINCH), DIGITAL, BRUSHLESS PROGRAMMABLE

BBR-BG-1343SW

$86.99 86.99

Big Bertha Model Rocket Kit, Skill Level 1

Rockets

EST1948

$24.99 24.99

BIGAOLE BGL-3G-A V2 3-AXIS GYRO SYSTEM

Demon 3-AXIS GYRO

This is a ground-breaking 3-axis stabilization system. The gyro CORTEX is high-quality, reliable, and universal. Whether you have a Parkflyer, a 3D Acro model, or turbine jet, this gyro will fit your aircraft. The cortex has 100% reliable sensors and the latest soft-ware algorithms. Everything is in a remarkably small CNC-milled aluminum housing. With this gyro system you will notice a difference- flying around, landing, and strong or gusty winds are no longer a problem.

IMMEDIATELY 'READY TO RUN'. SIMPLY READ IN EXISTING SIGNALS AND TAKE FLIGHT.

The Cortex does not require any PC or additional software settings - unless it is desired. You don’t want to wait and start immediately? You can teach the existing signals such as servo, control functions and mixer settings via the stick travel and your airplane is ready to soar through the air. It couldn't be easier.

COMPATIBLE. UNIVERSAL. STRONG. THE VERSATILITY LEAVES NOTHING TO BE DESIRED.

The CORTEX supports up to 5 freely selectable channels, e.g., 2 ailerons, 2 elevators and a rudder or 4 ailerons and one elevator etc. In addition to all standard receivers, the gyro CORTEX is compatible with various sum signal reception systems, such as S-bus (input), 2 spectrum/JR satellites and all PPM sum signals. Software and firmware updates can be completed online at any time.

SCOPE OF DELIVERY & GADGETS. GREATEST POSSIBLE FLYING SATISFACTION - WITHOUT WORRIES.

Get to know the carefree demonic satisfaction of flying with a bavarianDEMON. With emphasis placed on "carefree". The bavarianDEMON is coming to you, equipped with a sensor unit, connection cable harness, mounting pads, USB connection cable and exclusive design and information material. Additional spending caused by crashes are considerably reduced through a "DEMON inside" because training with this device is simply faster and more efficient. Even experienced pilots who have used CORTEX once no longer want to do without the "DEMON inside".

Click Here for Demon Gyro Manual

Video Playlist:

Includes:
· bavarian DEMON CORTEX incl. adhesive pads
· Connection cable harness
· Jumper for programming

*Gyro come in two options so be sure to select the correct one:

Without USB Cable
With USB Cable

BGL-3G-A V2 Gyro

$39.99 39.99

Biodegradable Performance Plus Clear Cleaner and Degreaser

Description:

Bob Smith Industries CA Glue

Super-Gold+™ Odorless, CA

SUPER-GOLD™ and SUPER-GOLD+™ are our odorless INSTA-CURE CAs They are non-frosting and take only 2 or 3 seconds longer to bond. There are no fumes that irritate the nose and eyes. The SUPER-GOLD™’s do not attack white foam; therefore, they can be used in the building of foam core wings and the assembly and repair of plastic and foam ARF’s. They will not fog clear plastic. SUPER-GOLD+™ is ideal for attaching clear canopies in plastic model kits; however, MAXI-CURE™ is still recommended for assembling the rest of plastic kits. Wood can be bonded to white foam with SUPER-GOLD +™ in less than fifteen seconds. For bonding foam to foam, spray a very light fog of INSTA-SET™ to one piece and apply SUPER-GOLD+™ to the other before joining. Excess INSTA-SET™ may create too much heat, which can melt the foam. Both SUPER-GOLD™’s cure to a more flexible consistency for better shock absorbtion. Whenever a large amount of CA is to be used in such applications as saturating fiberglass or Kevlar, SUPER-GOLD™ eliminates the irritating fumes from the evaporating monomer that make repeated use of CA unpleasant at times.

Works Best On:

Rubber
White Foam

Works Good On:

Balsa Wood
Soft Wood
Hard Wood
Glass & Metal
Fiberglass
Ceramics
Hard Plastics
Laminating
Water-Resistant
Reinforcing
CA Hinges

Avaliable in 2oz and 3/4 Pocket Size.

Pocket CAs feature a new top that has a pin built into the cap that covers the nozzle. This pin seals the bottle so that if it is tipped over, the bottle will not leak. This makes the Pocket CAs ideal for keeping in your tool or field box, just like our IC-Gel. One disadvantage that the new Pocket CA top has is the bluntness of the nozzle. This makes it more difficult to apply small amounts of the CA, especially in tight places. From the feedback we have received, it appears about 25-30% of users prefer the new Pocket CA top, which means that over 70% prefer our standard top for general bonding purposes. Most users are buying both types. Our original top for the workshop, and the Pocket CA for use out in the field. The 3/4 oz. Pocket CAs are available in BSI's Insta-Cure, Insta-Cure+, Maxi-Cure and Super-Gold+. BSI's new extender tip #304 works on the Pocket CA.

Click to Download Safety Data Sheet

TAE4700

$8.99 8.99