Products Map - RedwingRC.com

ESC (10A 20A 30A 40A) E-Power for RC Electric Airplane, Heli or Drone Models

 

Overview

The new Dualsky XC-45-LITE speed control is economically priced and perfect for 2-3S LiPO powered aircraft. The Dualsky XC-45-LITE speed control is compatible with the Dualsky ProgCard V2 and has a burst rating of 60A. The BEC is rated at 5.2V 3A and will punch this out all day unlike other low priced speed controls.

This ESC works well with the Dualsky XM 3542, 950KV motor

 

Specifications

 

• Dimensions: 67x 25x 7mm(L x W x D)
• Weight: 38g (with wires)
• Number of Cell:
  • LiPo 2-3s, 7.4-11.1V
• Resistance(Ri)(Ohm): 0.0026
• Max Cont.  Current & Max Cont.Output: 45A, 500W
• Max Burst Current & Max Burst Output: 60A, 666W
• BEC / Dissipative Power: 5.2V/3A (Linear)
• Programmable: Throttle + ProgCARD V2
• Signal Wire: 300MM JR

 

Special Order Item allow 3-4 Weeks for delivery

EX-PRO RRS

16 channel high power expander with Auto Protocol technology.

Small Yet Powerful and with Auto Sense... Welcome to the new generation of Power Expanders!

EX-Pro RRS is a high powered servo distribution system designed for all large scale models. It boasts Auto protocol discovery with dual (or single) receiver inputs (tripple for SRXL2) for receiver redundancy, 16 output channels matched one to one with your transmitter. EX-Pro boasts a high powered design capable of powering any model with todays high powered digital servos.

Coupled with the AR ProLine servo cables and you have the absolute best possible combination of power delivery for your high energy flying machine.  

 

Auto Protocol sensing and Supports multiple Protocols

Whether you fly Futaba, Jeti, Spektrum, JR, Core, Graupner or FRSky the AR EX-Pro RRS has you covered. With built-in downlink telemetry for each radio system and the ability to change the protocol using our exclusive auto protocol discovery feature, the EX-Pro RRS can be easy changed from model to model with different receivers in each. 

 

Sixteen programmable outputs

Looking at that next big project and wondering how you’re going to power all those servos, the EX-Pro RRS is equipped with 16 input channels and 16 outputs, all via a single cable connected to your receiver. Each channel is matched one to one with your transmitter so you can program simply and easily in your transmitter. Building that next giant scale 3D or IMAC model the  EX-Pro has it covered.

 

Easy to Use

EX-Pro RRS comes with preset channel mapping that matches your chosen radio brand so model setup is really simple.  

 

Telemetry ready

EX-Pro RRS gives you live feedback of both your batteries on your radio. Monitor the voltage, capacity and current drawn from the model's batteries at any time during the flight. Log maximum current draw during extreme manoeuvres (TX must be able to display maximum current draw) to ensure your model's servos are getting the full power. Helps to ensure your batteries are ready for the next flight.* 

 

RRS - Redundant Receiver technology

EX-Pro RRS is the safest in signal sharing technology, the redundant receiver system ensures your model by utilising two receivers. Unlike other power systems Smooth Flite reads signal from both receivers at all times and runs an intelligent algorithm to select the best signal.

 

In the unlikely event that a receiver fails then EX-Pro RRS switches to the better receiver in less than 0.5 of  a signal frame to ensure you will have constant control of your model. Reliability is key with models today, with our redundant receiver system you can ensure your model is always reporting back to you.

 

(Optional) Vibrant colour touch screen display.

Of course we offer an optional touch colur screen for EX-Pro so you can visually check  parameters if you like. The vibrant Smart Display gives you feedback and simple programming all in one touch screen display. With intuitive buttons and a single setup design. Your model will be in the air before you know it.

 

Dual battery redundancy, power management you can trust.
Ever wondered how many flights you have left before a charge, what about the health of your packs. Ensure that your model is safe and ready to fly with our dual battery redundancy technology. We link the batteries together, giving your model a powerful system capable of more flights before a recharge. 

 

View the EX-Pro RRS Users Guide PDF file 

 

SPECIFICATIONS:

* Redundant Receiver system – works with dual or single receiver system

* Auto Discovery Mutli-protocol support SBus2, Spektrum SRXL and high speed SRXL2, JR/DFA XBus, Graupner HoTT, Jeti EXBus, SRXL2, FRSky adn Sport, All SBus compatible transmitters including CORE.

* Telemetry ready

* 16 Input channels mapped directly to 16 output channels.

* Works with single or dual battery configuration.

* Works with all battery chemistries. LiFe. LiPo, Lion. (High power batteries required)

* Full Dual Battery Redundancy - If one battery fails the other battery takes full control.

* (Optional) Vibrant Colour 2.4inch diagonal touch screen with 64k colour

* EX-Pro RRS dimensions 2.59 x 1.92 x 0.47 inches (66mm x 49mm x 18.5)mm

* EX-Pro RRS weight (47gms).

Extra 330 1000mm (39.4") Wingspan Balsa Wood Laser Cut Aircraft 

Extra 330 1000mm (39.4") Wingspan Balsa Wood Laser Cut Aircraft 

Extra Long 24" Banana Plug Charge Cable/Extension

Description:

Male Deans to Male XT60 Connector

With this Deans to XT connector you can convert a battery with T-Plug to XT-60 on ESC / charger
The connector has many applications and can be used for charger adapter.

Features:

• Male Deans T style plug to Male XT60
• Durable design
• Heatshrink seal

EXTRA TALL CRADLES FOR 3 AND 4 BLADE PROPELLERS

EXTRA-NG 3D Airplane 47.2" (1200MM) Wingspan (Electric EPP Foam)

Extreme RRS--16 CH High Power Expander

Welcome to the world’s first Automatic Intelligent Servo Matching System (ISMS)

Intellimatch is the result of 2 years of research and development, is designed to take the worry out of servo matching and gives you the maximum power, smoothest response and increased life from your servos.

If you have built giant scale models before with multi servo control surfaces then I am sure you will be familiar with the process of manually matching the servos. You generally match servos on 2 end points and maybe a center point. That’s a total of only 3 matching points. There is no way 3 points will accurately match your servos. Also, you have to adjust each servo until minimal buzz is heard or you might use an ammeter to minimize current draw. Throw that idea away...

With the Booma RC Intellimatch you say goodbye to traditional methods of servo matching. The Intellimatch system automatically matches servos on 100 points through the servo sweep range. That is 100 points not just the traditional 2 or 3. Intellimatch further adds smoother operation by reading the closest 2 points from the servos current position and then interpolates between the 2 selected points to a resolution of 8192 steps. 8192 step resolution is the highest resolution available today.

The IM14 Intellimatch unit is designed to match 1 set of up to 4 servos. An example IM14 usage might be up to 4 rudder or ailerons servos

Read on for the full list of features

Model Example 1 - 100cc Scale Aero Model:

-2 Aileron Servos per aileron

-1 Elevator Servo per elevator

-2 Rudder servos

Suggested Power Bus Intellimatch Accessories

-2 x IM22 = 1 x IM22 for Ailerons and 1 x IM22 for Elevators

Model Example 2 - 150cc Scale Aero Model:

-3 Aileron Servos per aileron

-2 Elevator Servo per elevator

-3 Rudder servos

Suggested Power Bus Intellimatch Accessories:

-1 x IM22 = 1 x IM22 for Elevators

-2 x IM14 = for Ailerons

-1 x IM14 = for Rudder

Model Example 3 - Large Jet:

-2 Aileron Servos per aileron

-2 Flap Servos

-1 Elevator Servo per elevator

-2 Rudder servos

Suggested Power Bus Intellimatch Accessories:

-1 x IM22 = for right side Ailerons and Flaps

-1 x IM22 = for left side Ailerons and Flaps

-1 x IM22 = for Rudder

 

 

Specs:

 

 

• 32 bit Processor for the highest speed and resolution in the industry

• Automatic matching of up to 4 servos on a single channel

• 100 matched point across the servo sweep range

• 82 step real time interpolation between the 100 matched points

• PWM resolution of up to 8200 steps

• Dual LED indication for programming feedback

• Recommended battery chemistry - Life (2 cells), LiPo (2 cells), Lion (2 cells), NiCd(5cells),Nimh(5 cells)

• Maximum input voltage 10 volts

• Minimum input voltage 5 volts

• Compatible with all receivers and Power Distribution systems

• Works with Advanced Radio AR1232 and AR824. Also compatible with all other receiver and Power Distribution systems

• Dual fail safe arming with the supplied arming plug

• On board Flash storage - 100 year data retention

• Weight is only 12 grams

• Dimensions 49mm x 23mm (3.5 x 2.5 inches)

Extreme Stake Out (Plane Restraint)

Why take safety for granted when starting R/C model airplanes. Stop using poles, chairs, boxes or other people’s legs! Now you have the Airopult to safely and efficiently restrain your R/C model airplanes whilst you prepare yourself for a great day’s flying.

With two different sizes available - the Airopult will restrain up to 99% of all R/C model airplanes from moving forward and backwards during start up, thus preventing those unexpected and unwelcome accidents to yourself and others.

Use the standard Airopult for small to medium sized planes- such as the 30cc and 50cc planes.

For larger 100cc planes just add an additional set of extension arms (sold separately, select the See Also tab).

The Airopult's attachments will also enable you to restrain low tail draggers and tricycle R/C model airplanes.

Suitable for use on grass and hard type surfaces. Lightweight, compact, quick to set up and easy to use. The Airopult will soon prove to be an essential part of your flying equipment.

You can now safely restrain your R/C model airplanes independently with only the Airopult to assist you.

The Airopult as been designed with your safety in mind.

Don't be maimed! Be restrained!

Product

The AIROPULT is a quality product, the result of many years of design and prototype testing before it entered the market place. With the AIROPULT as an essential part of your pit package, Redwing RC wishes you many successful safe, secure starts and happy landings.

Contents

Standard Airopult:

Airopult PRO: Discontinued by manufacturer but lager 100cc planes can be accomodated by simply adding an additional set of extension arms (sold separately).

Qty	Ref	Description	Sizes in mm
1	A	Release Assembly	770	x	150	x	110
2	B	Hinged restraints with covers (attached to the Release Assembly A)	355	x	20
2	C	Undercarriage height adjusters	120	x	15
2	D	Undercarriage height adjusters	55	x	15
2	E	Tricycle undercarriage attachments	125	x	45	x	12
2	F	Undercarriage restraint adjusters	55	x	55	x	48
4	G	Extension arms	635	x	12	x	12
2	H	Foam protection pieces	100	x	30
1		Instructions	A3

SEE INSTRUCTIONS

NEW AIROPULT PRO NOW AVAILABLE!

The Airopult PRO comes with a longer base unit giving a rudder clearance of up to 58cm (2 feet). It also has 6 extension arms instead of 4 giving you a length of just under 180 cm (6 feet) from the rear of the undercarriage struts to the front edge of the rear wings. Perfect for those of you with planes 100cc and up!

PRO unit designed for larger airplanes up to 1.8 meters (about 6 feet) from the rear of the undercarriage wheel struts to the front edge of the rear wings (distance between C and B) and with the rudders up to 58 cm in length (diastance between B and A).

 

Ezrun Max4 ESC for 1/4 and 1/5 Vehicles

EzRun SL 56113 800KV Motor, w/ MAX5 ESC - Brushless Combo