Products Map :: RedwingRC.com

Piper Cub J3 1200mm (47.3") Wingspan Balsa Wood LaserCut Aircraft

FREE Shipping US only***(contact us at [email protected] to calculate shipping cost outside the US)

DW-S2301

$137.99 137.99

Piper J3 Cub 1070mm (42")

Description:

*Free standard shipping is for continental US only

RedwingRC Plug-and-Play aircraft!

The Piper J-3 Cub 120 is very well known. This is a time tested model that have proven to be great for flyers at any skill level. It does not matter what flying skill level you are at - Anyone can fly this plane, and even in windy conditions! If you want to do some aerobatic flying but are not the greatest at landings- then this is the plane for you! The Piper cub has some great details and looks great in the air.

Video:

Key Features:

2815A-1100kv outrunner brushless power system
30A Brushless ESC with Switch-Mode BEC
Durable and lightweight EPO construction with many surface details
Easy take off: effortlessly depart from the ground or your hand.
Easy to construct with pre-installed electronics (motors, servos and speed controllers)
Strong wing designed for smooth airflow providing exceptional stability, and great ease to control and fly even in wind conditions

Specifications:

Wingspan:	42in (1245mm)
Overall Length:	44.5in (850mm)
Flying Weight:	45.9 (1000g) w/Battery
Motor Size:	BM2815A- 1100kv (installed)
Propeller:	9 x 5
Radio / Transmitter:	Requires 4ch radio - (not included)
Servos:	4 servos installed ( 2 x 9g - 2 x 17g)
Speed Control :	1 x Dectrum 30A Brushless with Switch-Mode BEC (installed)
Battery:	11.1V 2200 mah LiPo 25c (Not Included)
Charger:	Requires a 3S lipo charger (Not Included)
Flight Times:	Average (8-12 mins)
Assembly Time:	Approx 45min

DY8941

$139.00 139.00

Piper J3 Cub 1245mm

Description:

*Free standard shipping is for continental US only

RedwingRC Plug-and-Play aircraft!

The Piper J-3 Cub 120 is very well known. This is a time tested model that have proven to be great for flyers at any skill level. It does not matter what flying skill level you are at - Anyone can fly this plane, and even in windy conditions! If you want to do some aerobatic flying but are not the greatest at landings- then this is the plane for you! The Piper cub has some great details and looks great in the air.

Video:

Key Features:

2815A-1100kv outrunner brushless power system
30A Brushless ESC with Switch-Mode BEC
Durable and lightweight EPO construction with many surface details
Easy take off: effortlessly depart from the ground or your hand.
Easy to construct with pre-installed electronics (motors, servos and speed controllers)
Strong wing designed for smooth airflow providing exceptional stability, and great ease to control and fly even in wind conditions

Specifications:

Wingspan:	42in (1245mm)
Overall Length:	44.5in (850mm)
Flying Weight:	45.9 (1000g) w/Battery
Motor Size:	BM2815A- 1100kv (installed)
Propeller:	9 x 5
Radio / Transmitter:	Requires 4ch radio - (not included)
Servos:	4 servos installed ( 2 x 9g - 2 x 17g)
Speed Control :	1 x Dectrum 30A Brushless with Switch-Mode BEC (installed)
Battery:	11.1V 2200 mah LiPo 25c (Not Included)
Charger:	Requires a 3S lipo charger (Not Included)
Flight Times:	Average (8-12 mins)
Assembly Time:	Approx 45min

DY36541

$159.99 159.99

Piston Section - BE 62

Piston Section for PTE 36cc.(21+22)

BE-62 Piston

$24.99 24.99

Plasti-Zap CA 1/3oz Bottle

Description:

Bob Smith Industries CA Glue

Super-Gold+™ Odorless, CA

SUPER-GOLD™ and SUPER-GOLD+™ are our odorless INSTA-CURE CAs They are non-frosting and take only 2 or 3 seconds longer to bond. There are no fumes that irritate the nose and eyes. The SUPER-GOLD™’s do not attack white foam; therefore, they can be used in the building of foam core wings and the assembly and repair of plastic and foam ARF’s. They will not fog clear plastic. SUPER-GOLD+™ is ideal for attaching clear canopies in plastic model kits; however, MAXI-CURE™ is still recommended for assembling the rest of plastic kits. Wood can be bonded to white foam with SUPER-GOLD +™ in less than fifteen seconds. For bonding foam to foam, spray a very light fog of INSTA-SET™ to one piece and apply SUPER-GOLD+™ to the other before joining. Excess INSTA-SET™ may create too much heat, which can melt the foam. Both SUPER-GOLD™’s cure to a more flexible consistency for better shock absorbtion. Whenever a large amount of CA is to be used in such applications as saturating fiberglass or Kevlar, SUPER-GOLD™ eliminates the irritating fumes from the evaporating monomer that make repeated use of CA unpleasant at times.

Works Best On:

Rubber
White Foam

Works Good On:

Balsa Wood
Soft Wood
Hard Wood
Glass & Metal
Fiberglass
Ceramics
Hard Plastics
Laminating
Water-Resistant
Reinforcing
CA Hinges

Avaliable in 2oz and 3/4 Pocket Size.

Pocket CAs feature a new top that has a pin built into the cap that covers the nozzle. This pin seals the bottle so that if it is tipped over, the bottle will not leak. This makes the Pocket CAs ideal for keeping in your tool or field box, just like our IC-Gel. One disadvantage that the new Pocket CA top has is the bluntness of the nozzle. This makes it more difficult to apply small amounts of the CA, especially in tight places. From the feedback we have received, it appears about 25-30% of users prefer the new Pocket CA top, which means that over 70% prefer our standard top for general bonding purposes. Most users are buying both types. Our original top for the workshop, and the Pocket CA for use out in the field. The 3/4 oz. Pocket CAs are available in BSI's Insta-Cure, Insta-Cure+, Maxi-Cure and Super-Gold+. BSI's new extender tip #304 works on the Pocket CA.

Click to Download Safety Data Sheet

PT-19

$4.99 4.99