Power HD B7 Revolution (Low Profile) Brushless HV Servo - 13.0 kg/cm (180.54 oz/in), 0.055 sec

Description:

Check out the new Power HD 0804HV Brushless servos!

These are great to use a throttle servo and can be used in systems with other high voltage servos!

The Power HD 0804HV high voltage servos are made with brushless technology. Now - we've heard about this "brushless" stuff before but it is time to ask the question on all of our minds - why is that so great? Take a brushless motor for example - no brushes in a brushless motor (no kidding...) nor does it have the commutator - instead a small circuit board coordinates the energy delivery to the windings. Think about this technology being used in a power tool - since the electronics communicate directly with the stationary windings the tool can adapt to its surroundings - only using enough juice necessary to accomplish the job. So if you are using a brushless drill to drive a screw into Styrofoam - it will sense the lack of resistance from the foam and pulls only enough charge from the battery that it needs. Whereas a brushed drill will run as fast and hard as it can no matter the job simultaneously wasting your battery life.

"What the heck does that have to do with my servo?" Well now they are incorporating that smart technology into these HD 0804HV high voltage servos - so they are not going to be sucking the life of your Redwing LiFe battery when it doesn't have to - which means not only would you be getting a great and powerful servo - it's smart! Your "LiFe" will thank you.

These servos are high efficiency and perform better. They run cooler and quieter and with less vibration - because there are no brush arcings, the radio frequency interference and electronic noise is significantly reduced.

All aluminum housing, high voltage and the new brushless technology gives you the best strength and speed while being incredibly efficient and long lasting.

So now the only question is - why are you still reading this? Go buy your Power HD 0804HV servos before they're gone!

 

Specs:

• Torque:
  • 105.54 oz/in at 6V (7.6 kg/cm)
  • 125.00 oz/in at 7.4V (9.0 kg/cm)
     
• Speed:
  • .055 sec at 6V
  • .042 sec at 7.4V
     
• Voltage: 6.0 ~ 7.4 DC Volts
• Weight: 1.58 oz (45g)
• Size: 1.59 x 0.80 x 1.03 in (40.3 x 20.2 x 26.1 mm)
   
• Operating Temp- -20℃~60℃
• Working Frequency - 1520μs / 500hz
• Brushless Motor
• Ball Bearing x 2
• Titanium & Steel Gears

Power HD B7RS Brushless Servo - 13.0 kg/cm (180.5 oz/in), 0.05 sec 8.4V - (Low Profile and Ultra High Speed)

Check out the new Power HD 0804HV Brushless servos!

These are great to use a throttle servo and can be used in systems with other high voltage servos!

The Power HD 0804HV high voltage servos are made with brushless technology. Now - we've heard about this "brushless" stuff before but it is time to ask the question on all of our minds - why is that so great? Take a brushless motor for example - no brushes in a brushless motor (no kidding...) nor does it have the commutator - instead a small circuit board coordinates the energy delivery to the windings. Think about this technology being used in a power tool - since the electronics communicate directly with the stationary windings the tool can adapt to its surroundings - only using enough juice necessary to accomplish the job. So if you are using a brushless drill to drive a screw into Styrofoam - it will sense the lack of resistance from the foam and pulls only enough charge from the battery that it needs. Whereas a brushed drill will run as fast and hard as it can no matter the job simultaneously wasting your battery life.

"What the heck does that have to do with my servo?" Well now they are incorporating that smart technology into these HD 0804HV high voltage servos - so they are not going to be sucking the life of your Redwing LiFe battery when it doesn't have to - which means not only would you be getting a great and powerful servo - it's smart! Your "LiFe" will thank you.

These servos are high efficiency and perform better. They run cooler and quieter and with less vibration - because there are no brush arcings, the radio frequency interference and electronic noise is significantly reduced.

All aluminum housing, high voltage and the new brushless technology gives you the best strength and speed while being incredibly efficient and long lasting.

So now the only question is - why are you still reading this? Go buy your Power HD 0804HV servos before they're gone!

 

Specs:

• Torque:
  • 105.54 oz/in at 6V (7.6 kg/cm)
  • 125.00 oz/in at 7.4V (9.0 kg/cm)
     
• Speed:
  • .055 sec at 6V
  • .042 sec at 7.4V
     
• Voltage: 6.0 ~ 7.4 DC Volts
• Weight: 1.58 oz (45g)
• Size: 1.59 x 0.80 x 1.03 in (40.3 x 20.2 x 26.1 mm)
   
• Operating Temp- -20℃~60℃
• Working Frequency - 1520μs / 500hz
• Brushless Motor
• Ball Bearing x 2
• Titanium & Steel Gears

Untitled Document

Description:

Similar to the Storm series of our new Power HD servos - the high voltage D-series are a coreless servo with the same hardened aluminum case and splash water protection.

These HD D18 servos are capable of 7.4 volts in 10 seconds and are made with the finest titatanium and aluminum gears. The long lasting coreless motor guarantees quality performance for a lifetime at lower temperatures.

Durable!

Dynamic!

InDestructible!

Distinguished!

Dirt Cheap!

Dapper! - The "D" in our new Power HD D18 high voltage servos stands for all of these things and MORE!

 

Specs:

• Torque:
  • 201.3 oz/in at 6V ( 14.5 kg/cm)
  • 249.9 oz/in at 7.4V (18.0 kg/cm)
     
• Speed:
  • .12 sec at 6V
  • .10 sec at 7.4V
     
• Voltage: 6.0 ~ 8.4 V
• Weight: 2.6 oz (75g)
• Size: 1.57 x 0.79 x 1.53 in (40.0 x 20.0 x 38.0mm)
   
• Operating Temp - -20~60centigrade
• Working Frequency - 1520μs / 333hz
• CORELESS Motor
• Double Ball Bearings
• Titanium and Aluminum gears
• Water resistant O-Rings

Power HD Coreless D30 HV

Description:

Similar to the Storm series of our new Power HD servos - the high voltage D-series are a coreless servo with the same hardened aluminum case and splash water protection.

These HD D21 servos are capable of 7.4 volts in 12 seconds and are made with the finest titatanium and aluminum gears. The long lasting coreless motor guarantees quality performance for a lifetime at lower temperatures.

Durable!

Dynamic!

InDestructible!

Distinguished!

Dirt Cheap!

Dapper! - The "D" in our new Power HD D21 high voltage servos stands for all of these things and MORE!

 

Specs:

• Torque:
  • 243 oz/in at 6V (17.5 kg/cm)
  • 291.6 oz/in at 7.4V (21 kg/cm)
     
• Speed:
  • .14 sec at 6V
  • .12 sec at 7.4V
     
• Voltage: 6.0 ~ 8.4 V
• Weight: 2.64 oz (75g)
• Size: 1.57 x 0.79 x 1.53 in (40.0 x 20.0 x 38.0mm)

• Operating Temp - -20~60centigrade
• Working Frequency - 1520μs / 333hz
• CORELESS Motor
• Double Ball Bearings
• Titanium and Aluminum gears
• Water resistant O-Rings

 

 

Description:

The Power-HD DSM44 digital servo is a micro servo with digital control electronics for increased performance. Just like the Power-HD DSP33 ,the DSM44 is also very light and ranks as the secont lightest servo at RedwingRC- weighing only slightly over 6g!!! In the DSM44, the output shaft is supported by a ball bearing for decreased friction, and another great feature is that most of the gears are metal for increased durability! The lead is terminated with a Futaba-compatible standard “JR”-style connector. Servo horns and associated hardware are included.

It is important to note that stalling or back-driving this servo can strip its gears.



Specifications:

• Torque:
  16.66 oz/in at 4.8V (1.2 kg/cm)
  22.21 oz/in at 6V (1.6 kg/cm)
   
• Speed:
  .09 sec at 4.8V
  .07 sec at 6V
   
• Voltage: 4.8v to 6v
• Weight: .24oz (6.75 g)
• Size: .68 x .87 x 1.06in (22 x 8.7 x 27mm
   
• Digital
• Lead Length: 160 mm
• Storage Temperature: -20℃~60℃
• Operating Temperature: -10℃~50℃
• Hardware included
• Suitable for F3P/EPP/KT Airplanes

Replacement Gear set for power HD servos.

 

 

Description:

The Power HD LF-13 MG is excellent for a 30cc or 50cc plane. This Digital servo has metal housing around the middle which allows for heat to rapidly dissipate. With double ball bearings you will have smooth movement and powerful torque when you need it. You cant beat the performance of this servo and at such a great price it's a no-brainer.

The LF-13 Power HD Servos are a PERFECT Bargain servo with respectable performance. If you are looking for a top notch budget servo that has better centering and resonlution, you may consider the 8309/8312 Power HD servos, but for this price you won't find a better servo!

 

 

Specs:

• Torque:
  • 145.8 oz/in at 4.8V (10.5 kg/cm)
  • 180.5 oz/in at 6.6V (13.0 kg/cm)
     
• Speed:
  • .15 sec at 4.8V
  • .12 sec at 6.6V
     
• Voltage: 4.8v to 6.6v
• Weight: 2.12 oz (60 g)
• Size: 1.60 x 0.80 x 1.55 in (40.7 x 20.5 x 39.5 mm)

• Operating Voltage - 4.8 ~ 6.6 DC Volts
• Operating Temp - -20~60centigrade
• Working Frequency - 1520μs / 333hz
• DC Motor
• Middle Aluminum Casing With Plastic Top and Bottom
• Double Ball Bearings
• Copper & Aluminum Gears
• Wire length- 300cm

 

 

 

 

 

 

 

 

 

 

Description:

The Power HD LF-20 MG is excellent for a 30cc or 50cc plane. This Digital servo has metal housing around the middle which allows for the heat to rapidly dissipate. With double ball bearings you will have smooth movement and powerful torque when you need it. You cant beat the performance of this servo and at such a great price it's a no-brainer.

The Power HD LF-20 servos are a PERFECT Bargain servo with respectable performance. If you are looking for a top notch budget servo that has better centering and resonlution, you may consider the 8309/8312 Power HD servos, but for this price you won't find a better servo!

 

 

Specs:

• Torque:
  • 229.1 oz/in at 4.8V (16.5 kg/cm)
  • 277.7 oz/in at 6.6V (20.0 kg/cm)
     
• Speed:
  • .18 sec at 4.8V
  • .16 sec at 6.6V
     
• Voltage:
• Weight: 2.12 oz (60g)
• Size: 1.60 x 0.80 x 1.55 in ( 40.7 x 20.5 x 39.5 mm)
   
• Operating Voltage - 4.8 ~ 6.6 DC Volts
• Operating Temp- -20~60centigrade
• Working Frequency - 1520μs / 333hz
• DC Motor
• Middle Aluminum Casing With Plastic Top and Bottom
• Double Ball Bearings
• Copper & Aluminum Gears
• Wire length- 300cm

 

 

Power HD LW-15MG Waterproof Crawler Servo - 15Kg/cm (208.3 oz/in), 0.11sec  

Specifications:

• Modulation: Digital
• Gear Type: Metal Geared
• Torque: 6v - 222.2 oz-in (16 kg-cm), 4.8v - 180.5 oz-in (13 kg-cm)
• Speed: 6v - .18 sec/60deg., 4.8v - .20 sec/60deg.

 

 

 

TEMPORARILY OUT OF STOCK! New stock returning in 2-3 weeks - pre order and we will ship out AS SOON as they arrive!

 

 

 

Power HD LW-20MG Waterproof Crawler Servo - 20Kg/cm (277.7 oz/in), 0.16sec 

Specifications:

• Modulation: Digital
• Gear Type: Metal Geared
• Torque: 6v - 222.2 oz-in (16 kg-cm), 4.8v - 180.5 oz-in (13 kg-cm)
• Speed: 6v - .18 sec/60deg., 4.8v - .20 sec/60deg.

 

 

 

TEMPORARILY OUT OF STOCK! New stock returning in 2-3 weeks - pre order and we will ship out AS SOON as they arrive!

 

 

 

Power HD LW-25MG Waterproof Servo - 25Kg/cm (347.2 oz/in), 0.14sec 72 grams

Specifications:

• Modulation: Digital
• Gear Type: Metal Geared
• Torque: 6v - 222.2 oz-in (16 kg-cm), 4.8v - 180.5 oz-in (13 kg-cm)
• Speed: 6v - .18 sec/60deg., 4.8v - .20 sec/60deg.

 

 

 

TEMPORARILY OUT OF STOCK! New stock returning in 2-3 weeks - pre order and we will ship out AS SOON as they arrive!

 

 

 

Power HD LW-30MG Waterproof Crawler Servo - 30Kg/cm (416.6 oz/in), 0.14sec 

Specifications:

• Modulation: Digital
• Gear Type: Metal Geared
• Torque: 6v - 222.2 oz-in (16 kg-cm), 4.8v - 180.5 oz-in (13 kg-cm)
• Speed: 6v - .18 sec/60deg., 4.8v - .20 sec/60deg.

 

 

 

TEMPORARILY OUT OF STOCK! New stock returning in 2-3 weeks - pre order and we will ship out AS SOON as they arrive!